Jump to content


Popular Content

Showing content with the highest reputation since 03/19/2019 in all areas

  1. 2 points
    These looks cool and are just straight slab side prototypes. Wouldn’t take much ribbing, etc, to really dress them up either...
  2. 2 points
    I haven't bought anything in quite awhile. Yesterday I reloaded eighty five 30-06 rounds, though. Kinda feels like I bought a bunch of ammo.
  3. 2 points
    Lol. I definitely don’t consider them a rival. I explored the idea of a licensing agreement with them and didn’t like the resposivness or receptiveness. Also they are a smaller company and that can make accountability trickier as far as royalties go. Not saying I didn’t trust them or anything like that though but it’s definitly things to consider. The first patent runs out in 2033. Ccspecs brother had concerns certain geometry wasn’t stampable. Another stamper, a giant company, said it couldn’t be stamped as well. Honestly I don’t buy that though. I’m not even in that field and see a super simple solution and have no doubt their are others. I’ve never been much at settling for something can’t be done. More often than not I have found its more the matter if it can be done practically and I’m confidant it could be. The second patent hasn’t become official yet but will be good for 20 years from that date so probably good until around 2040. It would be a much easier design to stamp. Honestly though before the first double stack patent runs out I will have made a double stack obsolete. 😂
  4. 1 point
    Dunno what cost gonna be, but it’s not Chinese and it has SBA-3 on it already! Gross stock adapter, maybe that’s on there for OAL? http://www.gunsholstersandgear.com/2019/03/14/kalashnikov-usa-komrad/?fbclid=IwAR1q9KhNYhNLWHVZ0I3EPpoj7bGPh6q_ko84HMxT9C1P4bdeYsUOj53nhhk
  5. 1 point
    The man said, "keep it".... Keep it. Fuck the Commies, it is your legal property. Now STFU about breaking anti2A laws. Are you an idiot? I'm half joking with the last comment.
  6. 1 point
    A polymer double stack could look really nice. Even cooler than an single stack actually. Just knowing it has more capacity in a shorter length will help the look as well... My vision for a Saiga-12 double stack is to have a comparable price to a single stack. Not some jacked up price that keeps single stacks viable... What happened to the Mossberg mag won’t be happening again. Not in price or design... Prices of those have come down a lot though. It’s easy to find a 20rd for $70 to $80 now but still high in my opinion. The truth of it is a single stack mag can’t even compete in a price war with a double stack. It takes less material to make a 10rd double than it does a 10rd single. That also means it will be lighter than it’s single stack counterpart. Being shorter and closer to the gun will also mean it will be better balanced and will have less recoil and backlash forces on it as well. Make no mistake that a polymer double stack for the Saiga-12 on my watch would be second to none, including OEM mags. Making everything else VERY obsolete. The market would be absolutely flooded with so many used single stacks... I also have something that will make all prior drums just as obsolete as doubles will make single stacks. Patent pending on that as well..
  7. 1 point
    I did not imply anything. Just that I recalled some issue existed related to inventory, not like I keep track of everyone business dealings. I have enough on my plate.. As for production volume, we can make around 3,000 to 4,000 magazines a month, maybe more but I've never found a product that had demand even close to that, so I've really never got to let the production line off its chain.. Normally we make batches of around 300-500 because on average that works out best for storage capacity vs demand. We just wrapped up a run of 2500+ magazines, six different types, which restocks those items for 14-18 months.. Having a 5 year supply of anything is just silly. I'm not attacking the need for an audit as much as saying that anyone that was motivated to falsify records could totally do it since the entire audit is going to be checking data that was entered into the system by the same people who would be falsifying the records.. So the audit is always going to show that everything is perfect because the only record that the product ever existed are the papers they generated to show you. You've likely always dealt with companies that produced part of a good under contact. So you have purchase orders, contracts, bills of sale, shipping documents ect. That simply does not exist when everything is made under the same roof.
  8. 1 point
  9. 1 point
    Good luck with the health stuff, Seems like you can’t get ahead for sliding backwards sometimes.
  10. 1 point
    All depends on what the job is at the time.... guns are tools. And ALLLLL of mine are my faves, ....lol. But, I will agree on the S12 for my shotty.... I trust my life on it.
  11. 1 point
    wheres that pic of md's smaller provile drum??
  12. 1 point
    Thanks. I currently have a total of 4 3/4 fingers. Fitting a pad is more of a challenge than I'd like (not to say I couldn't do it if I had to). Because the Lynx 12 has a 4 inch stock, even the small common slip-on pads (Limbsaver, Pachmayr, etc) may be too big. I've ordered a UTG Combat Pad. There are negative comments about the "spikes" on the back of the pad. If I find this to be a problem, I own a belt sander.
  13. 1 point
    Hard to argue any of those. I like SA XD better than Glock, though. And, I need an AR in .308 to be my favorite.
  14. 1 point
    Bought a “well used” genuine HK MP5A3 collapsible stock from HK Parts for my newly SBRed PTR 9ct. Looks old but works perfect. Doug
  15. 1 point
    Something about over 26 not concealable so doesn’t matter.
  16. 1 point
    Thank you. Based on what I've read, the bore of a 12 gauge is .729. So .724 means the choke is .005. That's a "Skeet 1" choke.
  17. 1 point
    I know what you mean but it is true. The fit and finish puts the Saiga-12 to shame on all I have seen. I have 2 of them as well. These are made in the same factory that produced the type 56 AK. Plus SDS was demanding quality. I constantly see the lead engineer making trips to China as well. Probably once a month or close to it. Likely because you do have to keep your eye on China. China does have access to quality material, weather they use it or not is largely based on if the contractor demands it. At the price of them you should just get one and see for yourself. It’s going to blow your mind because it sure blew mine!
  18. 1 point
    Figured so!! Same price as the Chinese but not, perfect!! im hoping that fugly stock adapter can be swapped out, and that OAL has some wiggle room. Maybe psa/sb tactical triangle arm brace be out soon and we can use that
  19. 1 point
    I just joined, because I got a Lynx and fired it for the first time today. 5 round included mag worked great. 2 - MD20 drums worked great. 2 - SDS 10 round mags wouldn’t feed. Looks like the follower is a little too wide. I’ll mess with them and see how it goes. Looking forward to learning a lot from you folks!
  20. 1 point
    Yeah, China has an utter shit government. Why those people don’t rise up and hang them all blows my mind. Sheep...
  21. 1 point
    Wouldn't mind a Polish Tantal AK74, that would be pretty nice. But for now the Bulgarian is great. The SLR107FR is a really nice rifle. It was this or a SAM7 Folding.
  22. 1 point
    Picked up a new range toy, PTR 9ct, which is an HK MP5 clone in 9mm. Already sent in an Efile Form 1 so I can put on a collapsible stock to give it the MP5A3 look. Doug
  23. 1 point
    Can someone add the Lynx 12 to the forum as far as its own link?
  24. 1 point
    For others here, I would worry that they might start posting pictures even if no one asked the questions.
  25. 1 point
    You know with some of the people here, I would be asking questions if they used a phrase like "My mom and girlfriend"....