Ultra_Magnus

The Stock trigger is horrible compared to a converted saiga. Thats reason enough alone imho.

dunno, tapco stuff make look/feel cheap. But its defintly durable. During the install of my tapco t6 stock, i got frustrated because i drilled a crooked hole and couldnt get it on. I chucked it against the concrete wall in my basement as hard as i could and it didnt even get a ding.

Also here is my modded safety measured. Maybe it was to short?

Its Tapco. No i didnt install the BHO. No the hammer isnt drifting, The safety just doesnt stop the trigger group before it releases the hammer. Its like its not long enough, which is why i added the metal. Now it works fine... Not sure what the deal is..unless the BHO has somethign to do with it. Hmm Tapco hook looks like it could possibly be the culprit. Did saiga change their hooks or did i get a defective FCG?

Its Tapco. No i didnt install the BHO. No the hammer isnt drifting, The safety just doesnt stop the trigger group before it releases the hammer. Its like its not long enough, which is why i added the metal. Now it works fine... Not sure what the deal is..unless the BHO has somethign to do with it.

Its Tapco. No i didnt install the BHO.

They are the same, which is odd... Anyways, rigged up a temp solution until i can think of something better. Cut out a piece of teh old floor plate and used JB weld to adhere it to the buttom of my safety. Safety works now...lol....

Heres a video of my trigger in action. Maybe you guys can see something....

This is the only saiga i have, and the safety worked perfect before the conversion.....I did not remove any material from the safety, its bone stock... Ill see what i can do about measuring it. In the meantime im gonna take it apart and reassemble it. Maybe it will magically work :-/. BTW the rifle shoots fine, i tested it last night.

Its in the hole on the otherside of the reciever. Im not sure how much more solid i can have it in. Ill will take a look again tho and play with it. I gotta be doing somthing wrong, because ive googled the hell out of this and searched these forums and im the only one with this issue. edit: Yea ill try to see how much play there is when i get home. As i recall there was not much at all.

\ Safety engaged, trigger at rest. Trigger at about halfway pulled, if i pull it any harder, the hammer will drop. There is less play on the trigger with the safety engaged, but i am able to still get the hammer to drop. It appears the safey does touch appear the fcg, but lightly. And no, no matter where i posistion the safety, it does not work properly.

This is a 7.62.

Doesnt seem like the bar is enough to touch the trigger group (useing tapco g2) Safety on, hammer uncocked Safety off, hammer uncocked Saefty on, hammer cocked Safety off, hammer cocked Dunno, seems like the tab isnt long enough on the safety...

Im just finishing up my conversion. Testing it, i cock it, and then put the safety on, pull the trigger, and the hammer still drops. Im not using the bolt hold open. Did i miss something? or is this normal?

Damn :-(