anothermotorhead

didnt see the 'repair' part, if all it is is a repair kit then i withdraw my first assumption of ATF trap. but i wouldnt put it past them.

I bet its an TF trap

no bho. thanks for the info , bought a pair for 300 a piece, maybe 10 rds through them

bought 2 saiga 20inch barrell says from st luce fl., wondering if anybody knows anything?

them 'GUYS' in massachusetts are takin this gay marriage thing to the bank

Mexico is a lost cause. IF the people there are to scared to stand up for themselves let them collapse, if the FEDERAL govt would help the stae govt patrol the border on our side the situation would not be spilling ove into the border towns. IM not sayin that all the gun crime in those towns is mexican nationals but IM sure a large amount of it is. Ill say 80% and sleep ok tonight. Im sure what will happen is the old school class form of punishment for gun owners, somebody was bad so eveyone is gonna suffer. And that twunt clinton down there bad mouthing US citizens because were all drug addic

Thanks for the help, but if my stupid ass wouldnt of been in a hurry i would of realized that i DID NOT install the disconnecter. I just put it in and everything works correct. I hope some other newbi reads this and slows down and takes their time unlike me.

Just fineished my conversion and i have a single shot saiga now, It will reload a shell but the bolt wont lock the hammer back on the trigger. I would really appreciate some help.

beautiful work as usual 30cal. that looks like atleast an 1/8th inch overhang though. or do you have to grind it off. asa for my last question,CAN YOU WELD ON THE TRUNION Yes the overhang is intentional and correct. The overhang is what gets the bullet nose lifted out of the magazine feed lips, popping it up into the chamber. I have another I built with a dinzag BG with no overhang, but the dinzag BG is thicker than this Bulgy BG. Since it's thicker, it lifts the bullet nose up high enough to still make it into the chamber... Personally I prefer this modified Bulgy BG over the Dinzag.

beautiful work as usual 30cal. that looks like atleast an 1/8th inch overhang though. or do you have to grind it off. asa for my last question,CAN YOU WELD ON THE TRUNION Yes the overhang is intentional and correct. The overhang is what gets the bullet nose lifted out of the magazine feed lips, popping it up into the chamber. I have another I built with a dinzag BG with no overhang, but the dinzag BG is thicker than this Bulgy BG. Since it's thicker, it lifts the bullet nose up high enough to still make it into the chamber... Personally I prefer this modified Bulgy BG over the Dinzag.

beautiful work as usual 30cal. that looks like atleast an 1/8th inch overhang though. or do you have to grind it off. asa for my last question,CAN YOU WELD ON THE TRUNION

From looking at the guides on dinzags site ithink i can. Had i found this site or dinzags earlier than ordering from kvar, i would of ordered dinzags or manufactured my own. By the way do you think it is possible to weld a small bead on the trunion to make a guide.

another question. It has a square bottom on it, and i have a round trunion. can i grind it down to fit the round trunion?

I just got in the bullet guide I ordered from kvar abd i cant see how it is gonna work. the rivet hole is off to one side and all the ones ive seen for x39 are in the center. Did i get wrong guide?