Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by thx1971

  1. If anyone has S-12 front recoil spring laying around collecting dust let me know cause I need one, hook a brother up! Thanks

  2. I need both springs for my S-12 . I had the Tromix spring but didnt care for it . Thanks Jon
  3. Looking for a nice useable recoil spring if anyone has one laying around for a S-12 .My springs had some corrosion on them so I had to junk them . Those springs can fit into a regular sized letter envelope I believe for shipping which is ok with me. My zip code is 97138 Pay-Pal Thanks, Jon
  4. Well I got the rust out of the chargin hanndle where the recoil spring is inserted. I just used Naval Jelly on it but Im gonna trash that one spring and get a new one, Thanks to everyone for the info
  5. Its nothing i did wrong, I bought this saiga brand new in the box and everytime i get done shootin it i give it a thorough cleaning ,i dont have the slightest idea how that corrosion even got there my two ak-47s are perfect and they are over 11 years old with no rust or corrosion.
  6. yeah i always run a swab down there with breakfree,
  7. I clean my guns with breakfree everytime ,i have been noticing this corrosion on my recoil spring and in the chamber where the spring goes into. I shoot that wal mart ammo .It looks like some sort of electrlosis or something between the spring and charging handle. You guys maybe know whats causing this? Thanks It might be hard see but down at the end of the tunnel there is the corrosion. Notice the rusty corroded looking color on the spring,its only on that part of the spring the rest of the spring is fine.
  8. http://www.youtube.com/watch?v=lfIOi6Z16zQ&feature=fvw
  9. dam jug was a pain in the arse to shoot
  10. Have some slugs id like to put through the saiga, should the gas adjustmentbe on number 1 or 2, thank you.
  11. It doesent take much effort or brains to load it with the bolt closed ,no offense to your thread here.The bolt carrier does look good chromed
  12. Golly, you must be a big boy. I bet you go to the bathroom all by yourself to. Sorry, couldn't help myself. Won't happen again. Jack chill out, take it easy,its going to be ok lol,the chrome looks good ,im just saying that it dosent take a rocket scientist to load the saiga with the bolt closed a monkey could do it. unless your old and weak "whoops"
  13. I can load a full10 roundl mag with no problems with the bolt closed.
  14. Just wanted hear some of your views on the recoil buffer and what brand of buffer thanks
  15. Here is a few pictures of what Im dealing with here The first picture here is of the gas plug screwed in all the way ,notice how # 1 is not in the little dentent Here is a side view of the same picture Here is picture of my first turn of the gas plug set on number 2 Here is another picture of the # 2 setting with the gap Here is a picture of the setting on #1 ,to me i think this is where it should be,but not sure And here is the final sideshot of the #1 setting and the gap, From the picture I posted do you guys think this is the proper setting for num
  16. I unscrewed my gas plug all the way out to clean inside the port and now,I totally forgot if i have to screw it all the way back in and then back it off to number 2 .As far as i know it was set at number 2 from the factory.I do know that when you go to screw it back in that the little detent pin will catch on number 2 like three times before it bottoms out all the way to the gas block thing.As for when it suppose to stop on 2 i dont know. UPDATED POST WITH PICTURES OF MY GAS PLUG ORDEAL
  • Create New...