Jump to content

dyi

Contributor
  • Content Count

    197
  • Joined

  • Last visited

Everything posted by dyi

  1. Bvamp, you are asking if it has the so called chamber step to indicate a civilian vs military gun? I just got these home last night so I will check but I'm already demilling so it might be a little time to fire. Is there a way to visually inspect w/o firing. Also if you want the serial range PM me.
  2. Khyber Pass Copy From Wikipedia, the free encyclopedia Jump to: navigation, search A Khyber Pass Copy is a firearm manufactured by cottage gunsmiths in the Khyber Pass region between Pakistan and Afghanistan. The area has long had a reputation for producing unlicensed, home-made copies of firearms using whatever materials are available- more often than not, railway lines/sleepers, junked motor vehicles, and scrap metal. The quality on such rifles varies- as one might expect- ranging from "As good as a factory-produced example" to "dangerously unsafe", tending towards the latter end o
  3. Ok, so I now promise not to buy anymore Saigas (maybe one more S12 ok ok): One note on the selector markings, I really wish they left the stock ones alone!!!!!!!!!. They sand them off and get into the rail welds so then they weld a bit on the inside of the gun to compensate. Its actually a great looking weld considering. Also notice the difference in the scope mounts! The non-Y gun is my Khyber pass, thinking traditional on the Y stamp, full stock.
  4. Depends on what you want to do or what kind of clone you want to make. Are you trying to make a traditional 762 clone or a newer 100 series clone? All the gas block gives you is the bayonet lug vs the one you have now.
  5. Is it local or do you have to transfer? Good deal if its local, not fantastic if you have to pay shipping, transfer, and NICS.
  6. On my first one, before I had rivet tools, I set them with a punch and a hammer. Worked great. Really its easier than you think.
  7. ok so where's that dead horse animated gif when you need it give it up on the drill presses already. this isn't rocket science. its (1) 10-32 screw through maybe .25" of steel.
  8. Having a drill press makes it possible to drill nice straight holes all the time. Duh I have a drill press. But the point is don't let not having a drill press stop you from the most mechanically advanced machine shop functions such as installing a bullet guide. Thanks for pointing out the obvious...
  9. dyi

    .308 Bullpup!

    Wow apparently I missed a real poo storm here over nothing. Why build a bullpup? Because we can!!! But seriously the one I posted by HCPOOKIE is a copy of the RUSSIAN SVU bullpup experimental. So regardless of this and that, can't we just appreciate it for what it is and if want to build one more power to you! Too many arm chair commandos. Now for more porn: and for last!!! YES IT STILL HAS A BAYO MOUNT!
  10. I don't think that will do anything better than the factory rivets. The factory rivet shank is expanded just as much as a replacement would be. And I'm not saying this to get out of buying the proper tools. I already have all of them.
  11. So what about factory guns with the chamber area ramped? I guess they all blew up too.
  12. I don't know? your best bet will be to ask krebs. Screw the guns and muzzle brakes, who is that girl? Krebs adapter are 14-1LH x 24 mm, were do you saw it is welded? Thought bushings were threaded only on one side if threaded at all? I have a krebs 74 brake and adapter. Its threaded on both sides.
  13. The parking lot sale is the first weekend of the month. I got my 5 speed for $35 I think. Oh but you do not need a drill press for a bullet guide. I used a hand drill on everything, just don't drill the hole crooked.
  14. And Kvar, they're a bit cheaper. $145 or so.
  15. see also: http://forum.saiga-12.com/index.php?showtopic=23432
  16. I used the choate one. I like it better: http://www.midwayusa.com/eproductpage.exe/...&t=11082005 $54.00 from midway
  17. dyi

    .308 Bullpup!

    http://pookieweb.dyndns.org:61129/AKM/AK_308/ak_308.htm HCPOOKIE's gun not mine.
  18. My rivets haven't started to back out but as noted in my original thread, I may some day in the future install 8-32 button cap screws to those locations.
  19. They charge when it's shipped, but I've already got my price confirmed in writing by email. If Centerfire tries to change my confirmed price by even one cent, they'll be getting a visit from the Kentucky Attorney General. They'll try LOL
  20. Unless you like black eyes don't do it. I had one on mine for a while til I tried 3" mags. Ouch.
  21. Now I have to decide what to do with it!!! I have the following: Three piece Russian AKM wood and sidefolding stock for a khyber pass build Three piece Russian AKM wood and Izhevsk AKM grip Izhevsk AKM gas block, front site, rear leaf So a full stock or khyber pass baby? I also have a non-Y dimpled 762. What would you build the Y gun as?
  22. Gunbroker has the 15 minute rule and I paid my pretty penny. It'd be like posting "here's the car of my dreams, maybe yall'd like to bid against me on it".
  23. Call me sick. Ok I said I would stop once the holy grail was found:
  24. Jake, I'd be into a buy for a slotted one.
×
×
  • Create New...