Jump to content

Guer0

Contributor
  • Content Count

    123
  • Joined

  • Last visited

Everything posted by Guer0

  1. The wife has the 238 in the rainbow titanium finish. Definately a finish designed for women
  2. I am looking to add a Picatinny rail to my top cover. Does anyone know of anyplace that has rails with the bottom contoured to the top cover of an AK? All I have been able to find is flat bottomed. Thanks in advance for any help or info
  3. Im in on the contest and also would love to see it able to accept drums
  4. Just when I thought I had this project wrapped up, damn! Does your stock stay latched when folded with a mag locked in? When I put a mag in, the lip on the mag pushes on the latch inside the receiver, releasing the stock. Yes it stays latched. No issues there. Sounds like the latch isn't in the correct position, or it is not a Russian latch and may be out of spec because the mag shouldn't hit it. Not sure on that 1.
  5. No other Ideas then since mine is factory and no conversion. Good luck with it.
  6. Looking at you pics your butt pad is hitting the hand guard. Remove it and put on the original butt plate and see if you still have an issue. I know mine an original 12C not modified doesn't latch all the way with the AK100 butt pad on it like it did with the factory butt plate. Hope this helps
  7. Thanks Bob That definitely helped. Knowing that Tony moves the block back 3.75" for 8" or 10" guns and 2" for 12" I can just measure from the rear of the receiver to the front of the gas block and subtract the desired amount. Any other builders out there care to chime in as to what you move yours back to?
  8. On a Saiga 12 SBS with a shortened gas system what is the length from the rear of the receiver to the front of the gas block? If different companies do it different lengths please post what yours is and what barrel length. I am thinking of a new project but need to figure this out to see if it would work. Thanks in advance:
  9. Pretty damned crappy that asshats have to hijack Mike's thread on his forum for their bickering. Why don't you take it to the fight forum. So people that are genuinely interested in his products don't have to see your childish whining. It is obvious that ShottyOne is just a troll. They are not even a contributor. Sadly when you block someones post the forum still sends a notice when they post in a thread you are watching. Cant an admin or Mike block this fool from posting in Mike's forum.
  10. You almost summed it up perfectly in 1 word though. Premature should be immature...That's all there is too it. Kids think they have to have what they want now. When they don't get it whining and throwing a tantrum on the floor commences.
  11. There would be a bigger demand for quality 5.56x45 mags over 7.62x39. Especially higher cap like these. There are an abundance of mags and drums for 7.62x39, but not for 5.45x39 or 5.56x45. And there are always people looking for quality 5.56x45 AK mags and they can be pricy when found and as far as drums good luck finding 1.
  12. No answer to if you plan on making mags for 5.56x45
  13. Any plans for 5.56 mags?? Could make a killing in that dept. I would gladly pre-order for those if they fit the Bulggys.
  14. Because it isn't converted, so it is a stock gun. As such it is only legally able to have the factory 5 round magazine
  15. also barrel as the 12-030 front trunion uses a different diameter barrel as well
  16. now if they just had the rest of the unobtainable parts to make this part useful to us
  17. Some Pics of mine feel free to use any if you like
  18. Thanks for the quick replies. I would have PMed the questions but figured others may have the same questions.
  19. Is cleaning going to be easily done in the field or is there little parts we will have to be careful about losing when cleaning it (im assuming it will require more then just removing the plug and scraping the crud off the end like you do with a standard type plug)
  20. Ill take 1 Also how do these deal with fouling as the original plugs and gas fixer plugs get quite built up on the face, so if this does the same it isnt going to auto regulate. Does this help to kick the crap out of the gas block also to keep this from happening? Also is this going to be coated or bare metal as pictured?
  21. Guer0

    Awesome. I like the look of the drilled vents. What would be a good modification though, would be the addition of QD swivel attachment points on both sides of the rail. Just a suggestion. Big +1. Great Idea!!! Yes on the next production run. Double post
  22. Guer0

    Awesome. I like the look of the drilled vents. What would be a good modification though, would be the addition of QD swivel attachment points on both sides of the rail. Just a suggestion. Big +1. Great Idea!!! Yes on the next production run. When you do the standard rail will you have a special first run pricing on them as well? That is exactly what I am looking for my 12-C. What is the time frame on the standard rails and can we pre order?
  23. i would be interested in the gen 2 I need a new space gun looking toy to take to the range. Some kind of shroud to cover the barrel abd bring it all together would be cool also. Keep us updated
×
×
  • Create New...