Deussne

Not to hijack the rail thread, but the finish is duracoat. I got a lot of different colors. SO I used Flat Dark Earth as a base. Then I cured it in the heat oven. Then with a sponge I did a layer of olive drab, some sort of brown, ACU Gray and a mix of ACU gray and Olive. You got to do all of this at the same time so that the paint does not dry. Once you do all the colors you can take a clean sponge and blend in (blur up) the outlines a little. I oven cured it afterwards again. Since I hardened this finish with heat it should last for years to come. As far as rail goes.. Man it was a bitch t

Your welcome Your welcome, hey your photos didn't come through. Nice upgrade!

Slimlined the rail a little. Now All I got to do is mill down the bottom rail smooth. And she will be all set for a field. Thanks Chaos.

Threaded 14x1 (Standard AK thread)

I need to raise some money quick so I am offering these rifles for sale: Romanian PSL 7.62x54r Custom Ironwood Designs walnut furniture Shortened barrel (18") with removable muzzle brake (suppressor look a like) Please note this is not a suppressor, but rather a solid aluminum muzzle brake that looks like one. Comes with 5 10rd magazines, a magazine pouch and a sling. Asking $825 (firm) The scope is not included. I can include the scope in the package for an additional $175 (POSP 8x42 D PRO Rifle Scope w/ Independent Focus and US Mil-Dot Rangefinder, SVD Version) (Scope comes with all

So where is mikeD? When are we going to see these? Im ready to order half a dozen of them.

He got banned from that website. It doesn't really help me but at least he can't screw someone else over there. I'm planning on rebuilding the whole thing. CNC Warrior is out of the fixed Yugo receivers right now, so I am waiting for them to get those in stock before I start. I already got the new bolt, just need the new receiver.

Ill take one PM sent

Put some different furniture on it. Which one do you like better? By the way, I got more things to do to this rifle but I am waiting for the parts to show up, before I duracoat it.

went out after work and shot 1x45rd mag and 3x30 rd mags. I was not really aiming in one spot but rather trying to hit a target at 100yds. Here is my target: NO KEYHOLES and I tried 3 types of ammo, Surplus, Silver bear and wolf HP.

Ordered online, and had is shipped to a local dealer

Its a polish Tantal! I was always skeptical about these based on the online reviews.. However, after jumping the fence and ordering one, I have to say, it is a sweet rifle.... Plus it cost me as much as a stock Saiga 5.45 I have not shot it yet, but I have huge plans for it. I do not want to disclose any details yet. However stay tuned. By the way, this rifle is considered a PISTOL in Michigan so I can use it for my CCW

Cameron, sweet rail! Are those sides removable? If so way to go! By the way I second what Vermontmadman said, how about an extended upper that you can pin though the rear sight block. (Remove the rear sight and use the hole to pin a rail) That will add a secondary securement point and give a sweet extended rail over an AK. All you need is about 3"-4" past the RSB

Well, according to that BATFE comment one could easily add a Foregrip to that side rail on the receiver and make it unsporting...

NICE!

Well, the asswipe decided that the shit that he sent me is well worth the $650 that I paid for it. And decided that he does not owe me anything nor is he obligated to give me a refund. This is just irritating. What a douch... I got his name and home address is anyone is interested and wants to stay away from this mofo. Link below is to another forum where the conversations took place. I hope I am not braking any of this forum rules. http://www.ar15.com/forums/t_7_109/888666__1_Kevin44mag__Sold_a_damaged_firearm__and_failed_to_resolve_the_issue_.html

Sweet looking rifle! Good work!

Umm you can put a red dot on it, which does come in handy....

My first S12 was a 24" and that one had a side rail.. I think this is something new... Read this: "DATELINE JULY 22nd 2011 WE HAVE SOME BAD NEWS, SOME GOOD NEWS, SOME MORE BAD NEWS, AND ULTIMATELY SOME REALLY GOOD NEWS, CONCERNING THE SAIGA 12 GAUGE SHOTGUNS FIRST THE BAD NEWS AS OF TODAY, JULY 22nd, 2011, WE ARE OUT OF STANDARD SAIGA 12 GAUGE SHOTGUNS. WE KEPT THE PRICE AS LOW AS WE COULD, FOR AS LONG AS WE COULD, AND ULTIMATELY WE RAN OUT. IF YOU HAVE ONE OF THESE ON ORDER AS OF TODAY YOU WILL RECEIVE IT. HOWEVER, WE ARE NOW OUT. NOW THE GOOD NEWS THE GOOD NEWS I

Just read though one of the informational post by a dealer and it states that new saigas that are about to come in will no longer have side rails. Furthermore, I just looked at some stock pictures at another distributor webpage and sure enough it shows the saiga 12 without a rail? WTF have anyone heard about this?

Nice, did it take a lot to modify that Lahti Mag? I found a place where I can buy them cheap however I already have 9 PSL mags so did not think I really needed any more at this moment. I like your work! Good job.

That's crazy, I myself threaded many saiga barrels and they are no different then any other barrels.

Look what I stumbled upon on GB. http://www.gunbroker.com/Auction/ViewItem.aspx?Item=238326407 I am not sure if I am allowed to post this link here or not. But it seemed to be too important! I want one but for that money ...

CNC Warrior