mwessel

Welcome to the best shotgun forum in the world! Give the drum some workouts (load/unload...looad/unload) it should loosen up for you. Mine did. Getting 20 no problem in there without causing pain and suffering to the fingers. I tell ya this, it unloads a helluva lot faster then it loads...if you know what I mean!! Get some pics out there when your done.

Here's my McNasty backup!

Nailbomb, You win the prize for picking up on the RW&B. Reasoning to do it because it was one of the last things to do to make the project successful for me. Not to mention that's about all that's on the shelf for ammo these days that won't break the bank.

My name was born just a few days before Christmas when Aces & Eights HD called to tell me she was delivered. My wife and I figured we hit the JCKPT (Jackpot).

Well finally got this puppy to spit out the cheap light loads. I found that the Winchester Universal Bulk U128 was the worst to eject for me. And when I say the worst, I mean 9 of 10 would FTE. If that good. Check this post of mine and you'll see what I have invested. http://forum.saiga-12.com/index.php?showtopic=38935&hl= I feel the combination of the polishing, Gunfixers Improved Gas Plug, #2 Competition Reduced Power Recoil Spring and the Improved Gas Tappet from King Armory did the trick. So I loaded the drum and all my mags with the cheap stuff and headed to the range. Ran th

Well, where to start...thanks to all for the wonderful posts full of knowledge, suggestions and inspiration for the love of the gun!! All in all it went fairly well. I am average to above average on being handy with tools. Definitely a plus for this project. Here goes with the list of ingredients. 1. From Chaos (way cool stuff)! * Warthog Brake & Barrel Nut $84 * Pistol Grip $59 * Gas Piston $35 * Quad Rail $266 * PorkyPine $130 2. Ace * 8.5" Skelton Stock $65 * 1" recoil Pad $12 * Folding Mechanism $65 3. Tapco Trigger group G2 Single hook $30

The Boyz!

I have the ITP C10. Got it at a gun show for 55 bucks, new in the box. Bright as shit and love the features. It has infinite adjustable brightness. strobe light, and SOS signal light. I use it in the 1 inch adjustable angle CAA mount. Love that too!! http://www.itplight.com/product_show.asp?id=170 LED type:Cree 7090-XR-E Q5, life span up to 50000 hours Reversed polarity protection Made of aerospace grade aluminium alloy Ergonomic design for various functions Hard finish with Type Ⅲ anodization Reflector:half smooth and half orange peel Optional adjustment for any b

You talking about this? If so that is your hammer main spring. This keeps tension on the hammer until the trigger is pulled. The one on the right is the stock one. You can get one from CSS like the one the left.

In short, the fitting involves some very minor/minute filing for it to lock in place (if it doesn't out of the box). Just be careful to file a little then test, file a little then test.....till it locks in tight.

It happened as soon as I installed IE 8. Othere site are still working ok with logins. Granted I have tried every one. I tried to do a system retore but that failed for every restore point I have. Freakin Vista. I stepped back down to IE 7 but still have the issue. I am able to use IE 7 from another PC and login with no problems. I suspect there was registry damage done that I may need to look into. I'm open to suggestions. Thanks I'm taking my other pc up to IE 8 to see if this triggers the problem under XP as well as Vista.

My firefox works fine, But I am part of a IE shop and that is what I support. After I do enter my username and password I do redirect to the "thanks" page and then the redirect back to the home page but not logged in. hmmm... Home_page.bmp login.bmp

Is anybody else having an issue logging in using Internet Explorer 8. When I drop my username and password in it just cycles without logging me in.

Works ok for me. But buy a box and try it out b4 you load up to the gills on it. Every gun my cycle differently.

How did you screw up??? You have the Saiga-12!!

Agreed. You need the dummy round to feed the last shell to the top of the neck so it can then feed. Without the dummy round you will always have one live round sitting in the drum unable to get to the top of the next to be feed and chmabered.

You can grab them here at CSS. http://store.carolinashooterssupply.com/se...PAD-1%22/Detail but they show 0 on hand right now. Thisis where I got mine.

Wheel, As an FYI to my post. I did not need to grind my safety at all. I simply notched the BHO.

Big +1. Why have either of these....because I can and they are the Mac Daddy's in their class. And besides when the 13th zombie comes at me I'll still be plugg'n away and not reloading a mag. (They only run in packs of twenty)

Wheel, I feel your frustration as I too experienced that issue. Collapsed under the pressure and went ahead and modded my BHO. Should have done that from the git go. Works like a charm! Just push up on the BHO and sribe a line and cut/drill/grind or dyamite the notch. Thread on the Mod. http://forum.saiga-12.com/index.php?showto...=bolt+hold+open

Cameron, Can I assume the Porky will serve as a locking ring against the Warthog? I have the Hog and the ring but still waiting on the Porky. What's the latest eta on those Porkies?

Your understanding on the ability to lock a MD-20 loaded with 20 rounds into a closed bolt is correct. You need to either have the bolt open for 20 or anything less you could load on a closed bolt.

Good and fair priced may be a relative statement. What price range are you looking in? Are you planning on shortening your new toy? i.e. folding stock, shorter stock. So length may also be a concern. Myself I use a Pelican 1750 case. This is a hard /waterproof case that I carry both my Saiga-12 and my S&W AR-15 in. With plenty of extra room for all my mags, ammo etc. Case itself is 25 pounds but I put a strap on it so it's manageable. IT comes with pick and pluck foam so you can customize it to what you are carrying. I still have yet to get all the parts for my folding stock on t

Maybe Lonnie is doing the grinding after eleven with a beer. lol..... In any event Excellent PR Tony!!

Juggernaut....All I can say is SNAP!!!