ufo

Against falls you can modify feedlips like on picture. Red contact place is bad especially for hicap mags, make free space for magcatch. Edited for missing pic

Try Dirk Frey or Waffen Schumacher in Germany.

About russian magwell... really depends how it's connected to the gun. If you/gunsmith make it wrong you change internal dimensions and for free insert and fall of mags you will fit them. On the pictures: Saiga Legion(original custom gun + customization of shooter) - mags Saiga Police 12 - mags for Molot Vepr 12 Same mags were used for several guns. With some - no problems and could be used without changes(Saiga 12, Vepr 12, Legion), sometimes they were fitted.

This mags are called: SAIGA POLICE. Work with original magwell. AZG: About molot's mags vs. saiga with original magwell. THEY WORK, maybe little fitting will be required. About non-fitting. Check version of the mag. I know 2 versions with little different magbody. About molots and original mags - they are fitted to gun! Why russians use same gun number on mag?

Molot mags in original russian magwells WORK. Doesn't matter if it's molot or saiga. Minor fitting required. Maybe.

You can use same comps/brakes for Molot and Saiga(in Europe) and dimension is noticed here: http://store.carolinashooterssupply.com/servlet/-strse-456/SAIGA-12-DIE-BARREL/Detail M22 x.75 RH

It should be: M22 x .75

I don't have pics of broken rod yet. When i get it i post it. About broken boltcarrier. - it could be repaired but it depends on the place of fault. About broken bolt. - yes if you have one from saiga, you can use it. - it could be repaired - gen#1 has bigger issues than gen #2(IMHO your guns)

Same problem as with saiga. But bigger problem was braking gen #1's bolt. You have V-12 for a while... We are using it for competitions. I'll try to get some pics of broken rod.

Muffman count coils. I'm not able to say because i bought 8rds only. About breaking. Used for last IPSC season. No problems at all. I connected it together via electrical tape. It's strong enough. But i didn't use it as hammer. I recommend to stick on soft pad at the bottom of the mag. menace667 more pieces, more discount. Same for drum mag. But you have to ask for discount...

red_cedar: yes. First picture is without new basepad. It was completed. And reassembled after.

Sorry for pics folks. Wrong light. Taken by phone. Maybe little fitting will be required(sharp edge/knive and file). If you have original one from first run, you have clear sides connections. And there is no modifications at all and you will be lucky... Original spring is enough for every load i've tried.

original base of mag without original pad +4rds back front +4rds and original pad completed and original follower and spring beside

Have you had a chance to try the max rounds? I have some. What you wanna know?

Try Dirk from Planet-of-Gun or Oleg from Russmilitary...

Do not take FAB... This cheeckrest sucks... TESTED...

Or ask them directly...

Dude get better batteries or give back Eotech. Nothing more, nothing less...

It's called Saiga Police mags. You can use these mags or for molot vepr. Both types maybe require minor fitting. Where? Oleg from Russmilitary or Dirk from PlanetofGun... Drum is from Max only.

I read that the BP-02 can cause FTE issues with the S12 in this thread: http://forum.saiga-12.com/index.php?/topic/27250-anyone-using-the-belarus-bp-02-mount-successfully/ He mentions that the shells hit the mount; not just his EOTech. Yes but side rail and huge optics makes it normally... I prefer gastube-rail... You can still use side rail, modify rail and use small EOTech XPS...

Side rail? Low, centered from Kalinka - BP-02.

Outer dimensions. It depends on russian ISO... Sometimes you are able to use both without any modifications, sometimes you have to modify magwell(inside polishing) only or mags. But still you can use original setup.

Yes, it works. But little fitting/maybe will be required due russian ISO dimensions... I'm using several conversions for saiga 12 / 223 - and no problems.

This is version for Saiga/original.

Buy original conversion in Russia. Link: www.shooters-shop.ru I didn't find it somewhere else.