Jump to content

cino

Member
  • Content count

    49
  • Joined

  • Last visited

Community Reputation

3 Neutral

About cino

  • Rank
    Member
  1. cino

    trigger malfunction question

    Ill bend it over and try again tomorrow. lol that was kind of funny
  2. 7.62 has a tapco trigger kit installed. when I fired the first shot i noticed the trigger did not move all the way back forward. I pushed on the back trigger got a small click and it move forward and would fire again. dropped of dust cover and noticed the spring was not setting on the right side side of the trigger correctly. so i picked the spring up moved it over to where it should be. figured that was the problem. NOT... tried three more rounds and every round i had to push the trigger forward before it would fire. I looked and I dont see anything that looks out of place any suggestions on what to look for? couple of more test fires the hammer spring is coming off I need to take it apart and try to adjust the spring so it is not popping off
  3. cino

    iz132L questions

    I have this... with mag latch filed down to far when I got it but I opted to fix instead of sending it back to factory.
  4. Just personal experience with the "M+M Inc Magazine Release that's self adjusting" I liked the idea of any magazine works with less wobble. I recently purchased a saiga that the mag latch was filed down to far from the factory so i decided to try one. the cost was 29.99 plus shipping. 1. Super easy to install maybe 10 min tops 2. The first 2 magazines I tried wouldn't lock in both polymer uspalm and a pmag (should work with any mag pos or not) 3. I see the issue and I will have to file a little material off very little but none the less I will have to modify/adjust it. 4. customer service super nice but slightly lacking on responses through email. I called they were nice and I did get a person instantly to talk to. They called me back and said I would need to modify the mag latch. (i knew that was coming before they even called me back) 6. self adjusting? maybe less wobble? maybe but not out of the box for this particular rifle I really wont know until I modify and test it out more. I will post a final opinion after I modify it and run it a while but I am not sure that it will work any better or worse than a properly modified factory mag latch. I understand the design of the M+M and how it should work also to be fair we all know that the Saiga build tolerance is a little lack luster so the axis pin hole for the mag latch may be +/- on its position. But I thought this mag latch would resolve any tolerance issue and have no problem with a variety of mags or any mag hence self adjusting.
  5. cino

    Gas Regulator

    Thanks
  6. from what i saw when i looked through yes it treats suppressors as normal firearms. I think this is the link you are referring to http://americansuppressorassociation.com/hearing-protection-act/
  7. please contact you local rep. My neighbors would be thankful if this bill passes. https://www.congress.gov/bill/114th-congress/house-bill/3799
  8. cino

    Gas Regulator

    I know I saw a post with this info but cant find it. I was inspecting gas ports and when i thread the regulator back in I screw it all the way down and it almost clicks into position 1 but doesn't. I can back it out almost a full turn to get it to click into position 1. is this correct? tia
  9. cino

    newb question on muzzle brakes

    Lots of great info i guess its sad when i was browsing the pictures of these devices they all looked about the same.
  10. cino

    newb question on muzzle brakes

    sweet thanks for the great explanation
  11. So I see all sorts of brakes, flash hiders and door breach. besides those cool looking spikes that I am sure one day i would gouge my leg with it i don't see much difference. I understand the point of the ports being pointed in a certain direction. but besides the port direction i guess i don't understand the difference between them I guess if i ran out of shells and i could gouge you to death with my cool spike muzzle break
  12. cino

    feed issue question

    Thanks for the advice I've done some conversion's but not looked at doing the mag latch yet. I will do some homework before I go down that rd. Are the extended mag latches worth looking in to? Ive never personally held a rifle with the extended mag release so I am unsure if I would like it or not.
  13. cino

    feed issue question

    you are correct ill have to change out the latch its to short ugh wish i had looked sooner i just placed an order i could have added it on instead of paying shipping twice
  14. cino

    feed issue question

    Thanks I will have to take a look
×