Jump to content

voonman

Contributor
  • Content Count

    662
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by voonman

  1. I dont have my pic up as yet cuz cadiz gun works has mine...but i call it... The Cleaner...
  2. Try Tomball Pawn and Gun they are located on the west side off of 2920 and hwy 249.Ask for Josh or Rob
  3. I wish it was more popular and cheaper than the .223 ..It is proven to be more effective with energy and balistics vs the .223 and more accurate at long ranges than the 7.62x39 .>Also you can hunt with it in your local state park instead of the regulated .223 .. Hopefully soon they will start to make more AR15 type rifles with this caliber at a lower cost..I wish the military would replace the .223 with the 6.8mm..Check the youtube video below and tell me what you think.. http://www.youtube.com/watch?v=3zMpN_-pcas
  4. I think it is the best looking and strongest mag available for the saiga12..Nevermind the the little filing you have to do for it to fit properly..Deffinately the top pick of my choice in mags for the saiga12
  5. Very nice... I would have bought it if it came in 6.8mm..Still a very cool looking AR
  6. If the gun is still under warranty..They will send you a shipping label to send it in and it might take up to 3 weeks for them to repair it..And no you do not have to pay for repairs if it is still under warranty..contact them directly. Very friendly people..Ask for Vicky or Tom Cadiz Gun Works PO Box 126 117 West Market St Suite B Cadiz, OH 43907-0126 For inquiries and contact: ----------------------------- CGWsales@gmail.com (740) 942-3175.
  7. Could be a few things 1.Either bad ammunition.2.Bolt needs to be polished 3.gas ports are blocked...the best thing to do is send it in for warranty service Cadiz Gun Works is the official warranty reps..Contact them so they can fix the issue if it continues..I had to send mine in because it was doing the same thing on both gas settings but i only had half of a gas port visible in the gas chamber
  8. Dont really understand it..Ive never seen anything like this..even after 9/11...
  9. I checked 5 of my local wallyworlds..And they are still out of handgun ammo and most winchester buckshot shells.I guess the New World Order is coming soon lol...Have any of you guys encountered the same problem in you state?
  10. Is there anyone in houston that will do it for under $100 and a better turnaround time less than two weeks?? All i need is labor...I have all the parts..Or better if they can guide me through step by step i can possibly do it myself..Im not trying to be cheap but i dont think it should cost more than $100 to do 1hr or so worth of professional work if parts are already provided. Honest replies are much appreciated.
  11. Here is the problem I am not mechanicaly inclined..So if some here is willing to help that is local in houston to guide us through the steps on how to install this trigger group..It would be much appreciated..For those of you who also need help that are local ..i wouldnt mind all of us getting together to figure this out..
  12. What do you charge for labour?I already have the parts needed for a saiga 12 pistol grip conversion..All i need is labour done to it..Your reply would be much appreciated
  13. voonman

    Alumalite USA

    Thanx.. Hope he does..Cant wait for him to release his new products.
  14. voonman

    Alumalite USA

    Hello Has anyone tried to contact mike at alumalite usa?Ive been trying to email him for the past week but no reply..He has vented shroud that i want to purchase but i havent got any replies back from him..If anyone knows if he is on vacation let me know..Thanx
  15. yep same thing with me..hotwells gun range here in houston has the same rule..i no longer go there
  16. I had that same issue with the one I bought for testing. I fixed the problem easily. When you take the mag apart you will notice the follower is too narrow in the mag. The lugs on the follower that are supposed to stop it as it rides up in the grooves on the mag do not catch at the top. The follower has 'shrunken' after being molded. THE FIX: 1) Take a wine cork and stab it with a fork. (Fix works better while drinking the wine!) 2) Insert cork/fork into follower causing the follower to bulge out. 3) Get a coffee cup big enough for the follower/cork/fork to fit into, and fill it
  17. You guys might have to sand them down a little for them to fit in the saiga 12 magwell..most of the saiga 12s will not accept them right out of the plastic wrapping..
  18. voonman

    Gas Settings

    Hi Guys Im new here..And i just recieved a new Saiga 12..Tell me what gas setting should my saiga be on when firing low brass?
  19. Hey Everyone Just wanted to know if anyone had an update on the New UTG Quad Rail..I currently use one on my AK47 so i know the quality standards are very good.They said the release date was this month.Here is a link to there website.http://www.leapers.com/.If you look to the right side of there Homepage,you can see the saiga 12 ad for the quad rail.Your replies would be much appreciated.
×
×
  • Create New...