Blazer76

I love my WASR its a 85 and goes bang every time I jst wish century hadnt made the mag well so big would like to have it redone with a NoDak spud reciver

A CF hand gaurd with bonded threaded inserts would be the best answer to any aluminum rail system good info Uzi, the only part of the BC that would have isues would be where the BC slams into the trunion not sure if it could take it, but how do U know unless U try see to me this is the type of forward thinking the AK industry needs. now we need someone to build one Im gonna send emails to NoDak Spud, AK builder and Firing line see if anyone bites

so bushmasters AR is like ATI's stocks..... interesting 2nd have you tried making a pistol grip or stock? i jst watched some carbon fibre vids and it dosent look hard jst involved

thats awsome, is that layed over a steel reciver? it would be cool to see handgards and but stocks made out of carbon fiber. It would be interesting to see if caron fiber could take the stress but I dont see y it couldnt Bushmaster makes a carbon fiber AR reciver

but thats the point is to speed things up, the smaller gas port is no problem cause I have a adjustable gas block (currently my gun has less recoil than a AR) so I shaved the sholders on each side and took quite a bit of weight off my BC, wich added more recoil no matter how much I turned the gas down so I had a Wolf extra power recoil spring, and that was the trick, now she cycles about 15% faster with less gas which stays behind the bullet, the hammer on my G2 was way to heavy so I took some weight off it too

ok anyone here that would be willing to mill me a titanium gas piston and a 6061 bolt carrier

what FCG and ak do you have? no thers no special measurements, I did mine all by pushing the bolt and carrier back and forth by hand, and pulling the trigger with my eyes closed so i could feel the the trigger better

mine comes from a blazer i used to have it was a 79 when I think of that rig i think of preserverance: To remain steadfast aginst all odds, and 76 is close to my b-day year

I like the looks of the RR LAR-47 definitly heading in the right direction can any one cut a bolt carrier out 7075 or 6061? Im also wanting a gas tube/ hand gaurd system made what I basicly want is a ultimak style gas tube with the factory gas tube reatainer so it doesnt have to use the bands the lower hand gaurd would be like this http://store.carolin...rearm-Ar/Detail but made to attach to the gas tube so that the front hand gaurd retainer would not be used and could be removed oh and by the way Rock River is working on a poly 1911

the plastic is kinda cool but wood uh No lol, so are they yours? I think the plastic would'nt do well in Military trials though, maybe if it had a steel or aluminum skeleton

GOB that gas system sounds comlicated, how would it draw in the clean air? 3rdgear my ruger 10/22 steel bolt hasnt worn through the reciver yet and it has around 5,000 rounds throught it and there are many guns now that have steel bolts in aluminum recivers

If I had a PSL I would get a DEZ Arms adjustable gas block it will tame most of the recoil by reducing the diamiter of the gas port and keep more gas behind the bullet, I did it to my WASR and shaved a pound off the carrier and also have a Wolf extra power spring and I have less recoil than a AR

ok ive finished my wish list First off I would have it chambered in 6.5 Grendal, the receiver would be drop forged and CnC milled out of 7075 or 6061 T-6 aluminum like the Sako 95, but with a saiga shot gun style straight in mag well with a AR style mag release, the rear of the receiver would be tapped for Ace or similar stock attachments, A Cadiz last round bolt hold open and ambidextrous button bolt release would be used and fitted, and Nickel Boron or Ceramic coated. The trigger guard would be part of the receiver and shaped like the Sako 95. The Bolt carrier would be milled out of 7075

couldnt we use a metal treatment already in use for the barrel, bolt, and FCG to prevent galvanic corrosion. and what if we eliminate most of that floping around? Do we really need chanels we can drive a semi through, or a over gassed system that causes the carrier to voiently slam into the back of the carrier for reliability? and I like the idea of a titanium piston that would be interesting a couple designs i like is the sako 95 and the galil and even the new galil ace good ideas wish i could ge a sako 95 or galil ace here in the us

Ive been kickin around a few ideas one of the biggest compalints of a milled reciver is weight well why not make one out 7075-t6 aluminum which could cut the weight by a 1/4 or even in half you could even make a bolt carrier out of 7075-t6 aluminum to make the gun cycle faster with a 1.5 or 2mm gas port with a wolf extra power recoil spring to keep the recoil down, wich would keep more gas behind the bullet wich would help with accuracy does any one know the cost of a 9inx3inx2in block would cost?

yes polishing the carrier helps alot i also used never dull in my bolt, carrier, FCG, love that stuff. can have my wasr 10 rebuilt on a new reciver?

Greg which FCG do you have I have a first gen tapco and I polished and and took the rear hump down some and it made a HUGE inprovment

I agree trigger jobs are for the pro's, and your right Pauly Tony doesn't reprofile the back tapco changed the design, it looks like a pro polish job though is this some thing you did Pauly? This has me thinking lighter hammer, which gets to the firing pin faster, lighter carrier like the ak 74 lighting cut on the left side (possable mod) which will cycle faster, with a LOT less gass pushing the piston ( DEZ arms gas block), could have a ak that cycles as fast as a AR?, with the same recoil or less than a AR, interesting

Yahoo had this in there pic's in looking at my own trigger i dont see how it would affect reliability if any thing it would make the hammer fly faster due to less weight, I know that tromix reprofiles the front of the hammer

are we really compairing saiga's vs wasr's? wasr's aren't as reliabe as saiga's? THERE ALL AK'S yea ok my 10/63 is rough but I know when i throw a mag in it every time i pull the trigger it will GO BANG siga's are more accurate? IT's an AK