Jump to content

evergreenkid29

Contributor
  • Content Count

    239
  • Joined

  • Last visited

Everything posted by evergreenkid29

  1. I have replied i do not know why you have not received it i will reply again.
  2. I have called 6 of the normal suppliers and the ones above to and no one has anything and does not know when they will get more. However I found some black polymer smooth side mags from another place and bought 20 for a good price. but heres the issue the add said for AK-223mags and I asked the guy what they where and how they knew that they are 223AK, he said theres nothing wrote on them maybe a 2 or some other number at the bottom or they are just plain and they bought out another store and that store had them listed as 223ak mags,and also they have sold a good amount online for 223 and no o
  3. I have been looking for some Wieger mags. Does anybody have any they bought and are not using. I will pay fair for them i am not looking for a steal.
  4. yes paypal or money order?? If we do pay pal need to add 3.5% cecause of there charges

  5. wood & rubber SOLD, OD green Ergo and black Houge. $12 each shipped
  6. AR 15 Rock River Arms charging handle $15 shipped 7.62 AR BCM Gunfighter charging handle $45 shipped Top cover with rail for AK $15 shipped AR-15 pistol grip $12 shipped Tapco Saw pistol grip tan $12 shipped
  7. I have three different stocks for sale.The wood one is off of an mak 90 it has a few surface scratches on the back that would come right out. The one with the cheekriser and little round metal bar by butt pad on it is for a regular non converted saiga,I had this on either my 223 or 308 for about a week then I found out you could convert them. The marks on the end are from sanding it to fit they left alot of extra material on it,I just never got to fine finish sand it. The last one (has a cheekriser with a wide black flat rail below it,picture #3) is a brand new Ak stock that has neve
  8. I got to shoot mine today also for the first time and had the exact same turn out,but with different brand of shells.Winchester buck shot cycled everyone on number one setting and Winchester #7-1/2 shot skeet load on number 2, they would not eject on number one. I shot about 25 rounds of each. Should I be good to convert it or should I shoot more through it?? Also how will a new gas plug effect its shooting (or do they all react different with new plugs)
  9. Well I tried them in my wasr 223 and NO LUCK the bolt slides right over the top of the shells and does not grab one, and the magazine I tried was the one stamped 223, I loaded one of the others and same thing shells are not high enough. At first they are but after like ten rounds the angle changes and they start to drop. I am going to try Danzigs trick of building two ramps from back to front it will give the shells the lift that they are lacking.
  10. even though century made them to go with that gun? The one thing I did notice is the springs in the magazine seem to not have enough pushing pressure. What was your problem with them in the wasr 3
  11. I found out where these first came from and the one as said above is a rebuild from century and the other 2 have had the followers changed to be 223, I will see today how they work I am going to try them in my wasr 3 first.
  12. I noticed that the one that is stamped 223 has hardly any material left holding down the fowller and the first few shell seem loose but the other 2 seem to be ok?? Thanks for the info
  13. OK I bought 3 223 bakelite magazines off another site. I got them and one has a factory sticker on it saying 223 and a 223 stamping on the bottom of the floorplate. The other two have nothing on them to do with 223 but they all look the same and are the same size, except if you look at them from the top where the ammo loads towards the front of the magazine you can see on the one stamped 223 someone ground away the plastic bumps on each side of the magazine. The other two still have the bumps on them and the bumps act like a kicker to the shell. when the shell is loaded and pushed forward the
  14. What is the best way to go then that still gives you the most options for different brakes. Is it the 5/8 24 thread??
  15. they are out there i just bought one for $10.00 on another site, you just have to keep looking. Now does anyone know where to get a recoil pad for it??
  16. what are warthogs?? did the metal magazine ever get released??
  17. ARE THERE 2 OR 3 ROUNDS OF PREORDERS? HAVE ANY SHIPPED AT ALL YET? WHAT IS THE EXSPECTED WAIT FROM AN ORDER PLACED TODAY. ROUGHLY ALSO IS THERE ANY NEMESIS IN STOCK OR HOW DO YOU ORDER ONE OF THOSES
  18. Here are some more photos. When the magazine is inserted into the gun with the adaptor in it, should the top of it be touching anywhere or is it just locked in and free floating at the top.I still have to clean this up some,but I need to know about the placement of the top of the magazine first so I know if I should make another step or take the first one out.
  19. Here are my depth pictures.One side is deeper then the other because on side i put a step in to fit the shape of the mag and it was done after the first side was.
  20. PLEASE LET ME KNOW IF YOU HAVE ANY AK 223 MAGS I AM LOOKING FOR SOME FOR MY JUST BOUGHT WASR 3 THANKS
  21. I WILL TAKE A FEW MORE 7.62

  22. I WILL TAKE A FEW MORE 7.62 UP TO 4 OR 5 IF YOU HAVE THEM. ALSO DO YOU KNOW IF THE 5.45 MAGS WILL WORK IN A 5.56 GUN
  23. Please do know that i am not "bad mouthing" your product by any means. When i wrote this i was talking about gun issues . Your adapter is well built and worth what I paid. the way my luck goes it could be one gun in a hundred thousand and i would have bought it.
×
×
  • Create New...