Jump to content

Rickj427

Contributor
  • Content Count

    80
  • Joined

  • Last visited

Everything posted by Rickj427

  1. I'm definitely going to look into the four piece. I need to do a little more research on them. They seem like they might be kinda hard to find. Anyone else have something different on their Mini's? Anyone else with experience with an FSC or four-piece?
  2. How much louder does the FSC make it? Quite a bit or just a little bit? Does it help with flash supression on your Draco? As far as the 4 piece, do you think it may cause the gun to be overgassed? From what I understand it can help with reliability because it creates significant back pressure.
  3. I'm looking for a muzzle attachment that will reduce muzzle rise and (if possible) tone down the Mini's fire ball. I've been doing a lot of research on the Primary Weapon Systems FSC47. It has had a ton of great reviews, but all reviews were with the attachment on full-sized AK's. My concern is the FSC47 making the Mini already loader than it is. Or pissing off the people next to me at the range ever more! Does anyone have any experience with this attachment on their Mini? Are there any muzzle devices that would be considered better or more appropriate? Thanks for any help!
  4. After doing more research, I'm leaning back towards to full length Draco. It sounds like there are no replacement parts, such as the buffer, for the Mini. Plus, there would be replacement parts for the full-sized Draco.
  5. I'm kind of leaning more towards the Mini right now, but is the gas block made of plastic? And do they sell extra internal parts for that version?
  6. Do you think the prices will go back down? If so, I'd probably be willing to wait.
  7. Thanks for the link! I'll have to call/email Atlantic to see if they have any in stock. I tried just using "Draco Pistol" for searching, but every site I found was out of stock. If you don't mind, what description did you use for searching? Thanks!
  8. I'm looking for a Romanian Draco Pistol, but it seems like everyone is out of stock. Does anyone know where I can find one? I've seen a similar version sold by I.O. called a Hellpup Pistol. I found a few review that say they are not worth buying. Any opinions or a source for the CAI Dracos?
  9. The first thing you want to do is make sure that the tiny ball and spring are inserted in the bottom of the sight. These provide the detent when changing between sight settings. Next, insert the windage adjustment screw. Here you can see how the bottom of the rear sight fit into the windage adjustment screw. [/img] [/img] The larger screw, star washer and oval washer are used to hold the rear sight on the sight base. [/img] To adjust the sight for windage, loosen the large screw and turn the windage screw clockwise or counter-clockwise as needed. The elevation is adjus
  10. Ok cool. I just ordered the front and rear sights and the rear sight mount. As far as silver soldering, what type of solder and torch do you use?
  11. Do you cut the front sight around where the red line is or where the blue line is? The kit that is sold by MAA shows a sight cut about where the blue line is. I couldn't tell from your picture where you made the cut. If you posted a tutorial that would be great! g3 sight.bmp
  12. Do you have any pictures of how you mount the front sight? And what is involved when using silver solder?
  13. If wanting a LRBHO, would it be a better idea to buy a new Izhmash S-12 with one already installed, or install or have one installed by Cadiz? Does anyone know what the differences are in the designs?
  14. Rickj427

    NEW SGL12-01

    Taking from the sticky "Why you should convert your Saiga": Intro: Your Saiga is made in the same plant, by the same people, and on the same lines as all Russian AK's. The 74's, the AKMs, the 100 series, etc, are all made at Izhmash, the Russian factory where Mr. Kalashnikov still works. Yes, the man that designed the AK-47 still works there. Now look on the side of your gun, it says Izhmash on it and has their arrow in a triangle symbol. Now is when you can crack an evil smile. Importation/Legality: In order to be imported into this country, it had to be neutered. It had to be in "spor
  15. Rickj427

    NEW SGL12-01

    Just make sure you do a full coversion before using any mags bigger than 5 rounds
  16. To mount HK sights, can I just buy an HK 91/G3 triple frame and cut the bottom half off or are there further modifications that have to be done? Also, for the rear, do I just weld an HK91/G3 sight base to the top cover or is there certain modifications that need to be done? What is the best way to line up the sights before attaching?
  17. If you plan on possibly using a Chaos quick clean-out or a Tac 47 Auto Plug they probably won't fit either.
  18. PM sent! He is really looking for some jobs. He has been out of work for a couple of months and just moved back to his home state. Any size picture can be made and any customization is welcomed. That's the coolest part! Anything you want, with any gun you want. Prices will vary from size to size, but the size I got (40" x 20", the thing is huge!) will run someone about $500. Half that size is half the price, however any size is welcome and available! I'll see if he can send me some more pictures of other artwork that he has done. This guy has some serious talent!
  19. Will do!! I can't wait!
  20. Rickj427

    Uh Oh...

    That was quick! Only places I know left that have them for halfway decent prices in comparison to everyone else is KVAR ($519) and New Frontier Armory ($550). Not sure how many KVAR has left but I image quite a few since they supply New Frontier Armory which has more than 100 still left in stock. When I bought mine yesterday, K-Var had them listed at $489.00!
  21. Rickj427

    K-Var's GSL12

    Is that etched area hard to cover up? I already placed an order through K-var. Wondering if I should cancel.
  22. I think someone wasn't held enough by mommy and daddy...
  23. It'd be twice the size.. just like Shandlanos said.. it'd work like a C-mag. edit: thinking about AK drums though... I wonder if it would be possible to make a multi-rotation drum that winds up and would hold a couple of rounds in each channel of the sprocket like the AK drums. Something you'd set the follower and load from the back. It would be damn heavy though. I think it's possible, but because of the rim and variance in OAL even in 2.75" shells, would be very difficult to make reliable. For practical usage, twenty 12-gauge shotgun shells in a magazine is about the limit - and
×
×
  • Create New...