Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by towerofpower93

  1. My oldest S12, owned over a decade at this point, is starting to have issues with the mag catch pin walking out with repeated mag changes. I’ve done a few mods off and on to this gun over the years, including using and then ditching an extended mag release lever as well as one which was thumb activated a la the IPSC Vepr 12s. Guessing the holes in the mag catch retention ‘wings’ have gotten egged out after repeated removal and insertion of the pin, causing the pin to fall out as I activate the factory mag catch to remove and insert mags. Ordered a new mag catch pin from CSS thin
  2. The gun will handle 3", or 76mm, length shells just fine. The issues arise with magazines. Use the proper mag for your corresponding shells. Unlike the 12 gauge, the 20 is very temperamental with regards to feed geometry with the long and short shells in an incorrect magazine. ETA: what is on the side of your mag, 20x70 or 20x76?
  3. All of the S20s can accept 3"/76mm shells. There's no such thing as a 2 3/4" / 70mm S20. The issue is that you have to run shell length specific mags for the S20, unlike the S12. 2 3/4" / 70mm mags for those shells and 3" / 76mm for those. The S20s are also more finicky with ammo, needing higher power shells to ensure cycling. Sounds like the shop stole your 13rd clear mag.....
  4. Both Tiger handguards and the 2 x 1" and 1 x 30mm rings are SPF Buyer welched on the bolt on optics rail so it's back up for sale.
  5. Just found another buttstock that isn't living on a rifle. Izhmash black polymer buttstock with Izhmash 5.45x39 cleaning kit. Includes screws for the stock: $35 shipped. SPF
  6. Cleaning out the parts bin of AK, AR, and SVD parts. All items are cross-posted and the first "I'll take it" wins the item. Please PM after claiming an item in order to arrange payment and shipping information. All prices include shipping and will ship from VA once payment via USPS MO or personal check are received. Please let me know if there are any questions or additional pictures needed. Thanks Eric 2 x SGM 30rd Saiga .223 magazines and 2 x 20rd mags. $20 shipped for each or all four for $70 shipped. SPF 2 x Tiger polymer handguard sets and 2 x Tiger buttst
  7. I zero my shotguns at 15' with birdshot since I shoot that 95% of the time in 3 gun matches. I then just figure out my slug holdovers since I shoot fewer of those. BL: zero with the ammo and distance you'll predominantly use and then figure out where to hold for your secondary round/distance.
  8. For sale in the northern Virginia area, a bunch of 5.45, 7.62x25 and 7.62x54R surplus ammo. Since I'm now reloading every caliber I shoot, save .22lr, I need to make room for components and a few crates of surplus that sit idle in the corner need to go. All of the below are eligible for face to face sale in the northern Virginia area or I can ship via UPS and you'll have to pay for the actual shipping. If you're interested in multiple items let me know and we can figure out a price and place to meet up to complete the sale. All the 54R was identified via the resources at 54
  9. SPF For sale is a professionally removed 16" FNH PS90 barrel and shroud from my PS90 SBR build. The barrel had less than 300rds of factory SS197 ammo through it before my stamp arrived and was pulled. Price is $300 shipped via USPS. Located in Arlington, VA. Accepted forms of payment are personal check or USPS money order. Barrel will ship the following business day after payment is received. Please let me know if there are any questions or additional pics needed. Item is cross posted so the first "I'll take it" followed by a PM wins the sale. Thanks Eric
  10. For sale we have a used Adams Arms bolt on gas piston system. This comes with the gas block, bolt carrier, bolt spring and gas plug; all you have to do is add whichever length drive rod and bolt for your particular build. These parts had approximately 50 rounds of 7.62x39mm factory ammo on them when I decided to go a different route for the build. Price is $150 shipped A collection of (4) carbine length black plastic handguards with heat shields, (2) front handguard mounts, (2) gas tubes for a Commando length barrel and (2) bolt on gas blocks with top rail and barrel pins. All are bra
  11. Up for sale is a CMMG 1/7 twist 16" upper receiver chambered in 5.56x45mm. On top is a Millet DMS-1 1-4x variable power optic with functioning illuminated reticle a Primary Arms 30mm mount. Also included is an older gas plug that has some scratches from being removed and installed. The upper/optic have ~1,500 rounds of brass cased, copper jacketed 5.56 and .223 ammo through it without a hiccup. Upper is located in Arlington, VA and will ship USPS. Price is $650 shipped Accepted forms of payment are personal check or USPS money order. The upper and optic will ship the following
  12. For my 5.45 guns I purchased a CNC Warrior 24x1.5 to 5/8x24 adapter and mounted a 51T muzzle brake to it. I then run cleaning rods through the whole set up over and over, with the weapon laying at different orientations, to see if the cleaning rods contact any part of the mount or SDN-6. So far I've got one Krink I'm running suppressed with no issues. As other builds get completed they'll get the same treatment since suppressed AKs, while not hearing safe or "quiet" compared to ARs, are still quieter than unsuppressed. While I could do the same thing to my 103 clone, I'm too much of a
  • Create New...