Jump to content

towerofpower93

Contributor
  • Content Count

    460
  • Joined

  • Last visited

Everything posted by towerofpower93

  1. Up first, an 8x42 PSO with the hammer gray finish. This comes with a red LED installed, green canvas scope cover, rubber eye relief cup and winter battery holder/extension. Additionally, this has the battery adapter installed that allows for the use of 2 x SR44 watch batteries instead of the more difficult to source Russian batteries. It sounds like something came loose inside the scope and is rattling around. Function is not affected and I used it on my SVD just last week with no issues in adjusting the elevation or windage or holding zero. I just don't need 3 optics for one rifle and I like
  2. Not sure what the technical term would be, but the barrel is a straight shot along the entire length. No areas turned down for an M203 or anything like that. Just put a set of calipers on the porton forward of the gasblock/front sight and it measured .74" but the barrel underneath the free float handguard is much beefier. As far as round count, the upper came to me as an addition to a rifle I purchased. I put on the scope and zeroed it, but have put less than 50 rds through it myself. The rifling is still very sharp while looking down the bore, but I can't give you an honest round count.
  3. SPF XD45 4" with factory barrel and Bar-Sto semi-fit barrel threaded .578x28, 5 13rd factory mags: $750 shipped to your FFL SPF All items located in VA. USPS MO or personal checks accepted. Items will ship next business day whether paying via MO or personal check. Let me know via a post and PM/email if you'd like any more info or pics and I'll get to you as soon as possible. First "I'll take it" and a PM/email wins the item. Items are cross posted so timestamp wins. Please let me know if there are any questions or additional pictures required. Thanks Eric
  4. Up for sale, a used Rock River Arms 16" stainless steel barreled upper with YHM free float quad rail, YHM flip up front sight/gas block and complete bolt carrier, bolt and charging handle. Sitting on top is a Burris Fullfield II 3-9x40 scope in a GG&G mount with Burris rings. $600 shipped Located in Arlington, VA and crossposted. First "I'll take it" followed by PM gets the sale. Accepted forms of payment are personal check and USPS MO. Please let me know if there are any questions or additional pictures needed. Trades: I'm always looking for Soviet/Russian plum, true black and
  5. First up, 4 x Yugo mag pouches for SVD, PSL, M76 mags. All are used, but not abused. $20 shipped each or all 4 for $75 shipped. Two pouches sold pending funds. Two left for $20 each or $35 for both shipped. Next, a UTG quad rail system for an AK47. Minor scratches from use. Comes with 12 rail cover sections. $40 shipped Finally, a gripstock setup for an UNCONVERTED Saiga rifle or shotgun. This particular setup has an Ergo grip, Ace folding mechanism and Ace buttpad. There is some wear on the folding mechanism from it being opened/closed (bare metal exposed at the top of the h
  6. Up for sale is a 21" Saiga in .308 that's had the barrel threaded 17x1 with a 17x1 - 24x1.5RH adapter and US made Dinzag Arms FH in place. Furniture is black US polymer PG and stock. A section of pic rail is attached to the underside of the factory forearm for the included bi-pod. On top is a Krebs rear sight rail system and a Burris Fullfield II 6.5-20x50 mil-dot scope sitting in a low style mount. Also included is the factory 8rd polymer magazine, 1 x 10rd Csspecs metal mag and 3 x 20rd Csspecs 20 rd mags (one with witness slots cut on the left side). I've put approximately 300rd
  7. 24x1.5mm I don't own an AK with 14x1LH that I'm worried about running a can on. The large majority are 24x1.5mm. Issue I see with not having the mount firmly secured to the threads is if you allow the suppressor to cool and then trying to wrench it off. Got a 51T mount stuck in my SDN6 that way once. Those mounts now get blind pinned and welded onto AR uppers. I imagine it would be easier to remove since the mount has something to put in a vice, but could still be a pain compared to a swappable mount or even a dedicated 24x1.5mm thread pitch. Since the can has plenty of hosts to play
  8. Was talking about the Surefire mount. Only issue there is the fact that I lose the ability to run the standard brake/FH/booster when that thing is attached. Stalking Rhino Industries supposedly has something in the works.... Guess the waiting game continues since I'm not going to Rocksett a Surefire mount onto any of my AKs and the Huntertown Arms route is not as perfect as they make it out to be.
  9. Interesting....wasn't aware they had a 24x1.5mm mount for it. If money was the straw to break the Carmel's back then I wouldn't be in the NFA game to begin with. An extra $200 to every purchase adds up quickly once one discovers how easy it is to buy XYZ
  10. Thanks for the heads up. I'd read elsewhere that the 24x1.5mm omni-mount they speak so much of doesn't actually exist until you find a smith to do he cutting of the threads. Kind of pointless since the idea is to run it on multiple AKs with that thread pitch. I guess the hunt for an AK-threaded can continues. Thanks
  11. Okay, who's got one/actually fired one before? I know member Hot Guns runs one on an SBR'd Draco and states it does a good job, but I'm searching out additional first hand accounts before I make it my next, "last one I'm gonna buy" until I find another. Thanks Eric
  12. At the end of the day my MAX10/45 just sees more use and I reload .45 more than 9mm anyways, so I may as well pass along the 9mm uppers.<br /> <br /> MAX10/9 with iron sights, U.S. Machinegun magwell insert and 5 new production RPB double feed 9mm magazines: $1100 shipped to your door.<br /> <br /> <a href='http://i1021.photobucket.com/albums/af338/towerofpower93/P1010001-4.jpg'>http://i1021.photobucket.com/albums/af338/towerofpower93/P1010001-4.jpg</a><br /> <br /> AMP10 9mm upper, Alliance Armament replaceable bushing receiver pin, 5 Suom
  13. XD45 4" with factory barrel and Bar-Sto semi-fit barrel threaded .578x28, 5 13rd factory mags: $900 shipped to your FFL http://s1021.photobucket.com/albums/af338/towerofpower93/?action=view&current=P1010003-4.jpg All items located in VA. USPS MO or personal checks accepted. Items will ship next business day whether paying via MO or personal check. Let me know via a post and PM/email if you'd like any more info or pics and I'll get to you as soon as possible. First "I'll take it" and a PM/email wins the item. Items are cross posted so timestamp wins. Thanks Eric
  14. Got my 12rd SGM mag from CSS today and I happened to be going to the range already so I took the V12 along with me. Fired two full mags, loaded on a closed bolt, plus the single 25th round from a box of Federal 7.5 bulk pack and it ran like a champ. Locked the bolt back all three times and didn't come loose or misfeed after I attempted to shake it around in all directions to see if I could unseat the mag or cause it to come out of alignment. Still waiting for my mag from the Atlantic pre-order, but have a feeling it's going to be a winner as well.
  15. towerofpower93

    Ammo?

    The LE127R are the only slugs I shoot due to having similar recoil characteristics to the Federal bulk pack 7.5 birdshot while shooting 3 gun. I would use a faster slug if I was hunting, but for my uses, the LE127R does great with 4" groups out to 100 yards with no choke and ~8" groups with a full choke.
×
×
  • Create New...