admbleg
-
Content Count
167 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Posts posted by admbleg
-
-
Polish the bottom of the bolt where it make's contact with the hammer, and polish the hammer. One thing I do is also shape the back of the bolt carrier where the spring goes in... if you notice it is starting to wear.... if you get a dremel sander wheel take the edge off you'll see that everything slides better.
-
Cool no worries... My buddy contacted Ultimak and they said it's supposed to have the gap. Once I put his new Gas block front sight combo on I'll take some pics...
-
Go to ak-builder and get the bulgarian ak-47 tube. yes it will fit a saiga with very little fitting.
ahhh... I was asking about the Ultimak rail... but thanks for suggesting the Bulgarian tube.
-
Thanks.. I had just posted a new topic....asking the question... Wasn't sure if you were still around or not.
If that is true about the expansion, why do I see other Saiga's with no gaps in their pictures?
Thanks again
-
Yes... I did a search and no I didn't find the info I needed.
I am helping my buddy out with his 7.62 Saiga. He bought a M1B it is to short. When locked into the Rear Sight block it is approx. 1/4 short on the gas block.
Before you say it will work... I know it will, it just looks like crap not to mention, I don't want him to take any shrapnel or excess gas from the gap.
Should he have gotten the ULTIMAK M3-B for Veprs ? Or??
Thanks
-
Where for $60??? Post the link or PM me for the info.
I have done a few I have done the Tactical Machining 80% and the Quentin Defense. Used the TM JIG for both.. have done the upright mil and the CNC version.
Of course if your not in a Leftist State take Tony's advise buy a regular Lower and register it as a pistol. If your not in a state that allows that, then a 80% is the way to go.
G/L
-
I know this is an old post... Which Ultimak did you buy? my buddy just got a M1-B and there is a gap between the gas block and tube... I know it should still work, but it just looks wrong. Thanks for the help.
Also, I would like to know if there is any modification to the factory HG required to use the Ultimak gas tube rail, due to it's "wings" I'm going to call them, that stick out for attachment to the clamps. Thanks for any input you guys want to give me on this matter.
Yes This one is not mine but the ones I have modified were similar. The hole threads are aluminum which means do not over tighten or you might end up with a stripped hole. Also, make sure the optics choice you plan on using is very heat tolerant because that aluminum rail will efficiently transfer plenty of heat.
Usually, more things clamped to the barrel is bad for harmonics-accuracy but maybe its the heat sink property of the aluminum in this case that sucks heat right off the barrel and keeps the barrel cooler maybe to enhance accuracy during extended firing and heating. How could we really prove this? Maybe if someone had a monster aluminum full barrel heat sink preferably with hundreds of fins clamped the full length this idea could be tested but I don't think it has been done.
-
Dumb question here....
Did you clean the gas block after firing the previous rounds?
Did you inspect the gas ports and clean them out?
As evl said it needs to be broken in, or polish the hammer, bolt and debur the bolt where the spring guides into the back of the bolt
-
Wow this thread got way off track from the MMA fighter and punk in Chi town.
-
Glad you figured things out... One thing I noticed when you were firing from the bench was the pressure you were putting on the magazine causing it to angle.
This can cause jams, it happens in AR's as well.
Food for thought.
-
rustolem black textured is a match
-
The only problem with the Krebs is *I think* it has 90 degree gasport, whereas a Saiga has a 45 degree gas port, So it can be put on some 7.62 rifles but not saigas. Someone xorrect me if im wrong?? I love the Krebs block and really wanted one... But I just ended up buying a gas 45 degree gas block from markw1 on this site and welded my front sight block to it. It turned out great!! It's currently at the gunsmith getting pressed on right now.
Saigas have a 90. Krebs on my Saiga 223
At least in all the ones I have taken off.... 4
-
Can somebody out there with a Draco measure the barrel diameter at the gas block? Help me out here guys.....
I just came along your post... I will measure mine. it is .574
I know Krebs is getting ready to start making theirs again.. I just sent an email to them to put me on their list.
-
Regarding the open gap with a left side charging handle, what about something like this on a SigSwat to keep out objects. (not the best pic)
Hey King..
Prior to getting to your post I was thinking the same thing....lol
Ths Sig 556 has a ruber slot for the charging handle to go back and forth.
-
Here is a good link.
http://www.legionarms.com/pages/Dimensions-%26-Plans.html
Has alot of dimension info
-
Just sent payment
-
-
Nice..Great Work
I like how you did the wood, and the FSB.
Just currious.. How come with the fake can? For looks or function.
I keep going back and forth between getting a PSL or Saiga 308. Your making it easy to lean towards the PSL..
Keep up the great work.
Sean
-
You know that in New Jersey possessing a BB or airsoft pistol is exactly the same as possessing a Glock 17? And yes, people have gone to prison for that. NJ gun laws are vague and arbitrarily enforced. Apparently NJ case law is very odd. You can't just read the law to know what is legal, you actually need to hire a lawyer.
I'd suggest
1) That you not travel there. People should boycott left-wing theocracies like NJ anyhow.
2) If you MUST travel there that you do not bring any firearms of an sort, including airsoft or slingshots, unless you have obtained legal advice from a NJ lawyer that what you intend to bring is legal.
"Firearm or firearms" means any handgun, rifle, shotgun, machine gun, assault firearm, automatic or semi-automatic rifle, or any gun, device or instrument in the nature of a weapon from which may be fired or ejected any solid projectile,
ball, slug, pellet, missile or bullet, or any gas, vapor or other noxious thing, by means of a cartridge or shell or by the action of an explosive or the igniting of flammable or explosive substances. It shall also include, without limitation, any firearm which is in the nature of an air gun, spring gun or pistol or other weapon of a similar nature in which the propelling force is a spring, elastic band, carbon dioxide, compressed or other gas, or vapor, air or compressed air, or is ignited by compressed air, and ejecting a bullet or missile smaller than three-eighths of an inch in diameter, with
sufficient force to injure a person.
WoW!!
I just read TITLE 13. LAW AND PUBLIC SAFETY CHAPTER 54. FIREARMS AND WEAPONS
I don't feel so bad here in Kalifornia.. I thought our gun laws were on the verge of socialism, but NJ wins that vote. Great info here, my uncle retired from the Secret Service he has a AR SBR and I was telling him how he won't be able to bring it back to Cali when he retires and moves back.. He just so happened to move to a town in NJ.. So I was checking out this thread about legality to let him know (if he didn't know already) I didn't see anything regarding SBRs, yet the set up of your AR must meet certain standards to not be considered an AW according to N.J.A.C. 13:54-1.2 Definitions
Great thread
-
Nathan PM sent
-
-
Looks good. You have the cammo bug now, it won't stop you'll be doing ammo cans mags.. small animals..
As well you'll get better and better.
-
I was at home deopt buying crap for a remodel I was doing... I was waiting on a new Debit card. So I used my check book, I only use it once a month for a child support check. Had about 500 in supplies. Of course there was a line behind me,,,, the lady goes your check was declined.. "what declined?" I asked her to run it again, well their check verification system declined me because I don't use my check enough and they thought they were stolen... Total embarssement. Walked out pissed calling the verification place, and to the bank to draw out cash.
I hope things work out for ya.
-
What barrel extension are you useing?
I tried a CNC Warrior 2 inch extension with the Tantal Muzzle Brake, and had some real bad results. I was getting rounds all over the place. Took a look at the brake and rounds were hitting or sceeming the brake throwing them down or up towards the target.
This is the tacked 308 picture thread.
in Saiga .308
Posted · Edited by RLTW
Did a little custom work to the ole' 308.
For the Gas Tube. I took out the spot welds and move to the front of the Tube and re spot welded. Top wood was cut back on the original PSL and reshaped. Lower was cut and reshaped, also had to remove wood to fit over barrel... I used a sanding barrel from HF fit well on the drill press.
Dinzag Arms retainer.
The Bipod mount is nothing more than a Magpul rail, screwed into the wood... I put everything together to get some pics... I need to take it back off level it better.
Gas block fs combo.... I welded that up... probably going to put the original FSB back on once I open it up for the barrel.