hlb3

Sorry, it's sold now.

No, just regular factory wood furniture.

Sold! Here it is (bipod not included), that is the 20rd mag that is in it... The compensator... The barrel crown and threads before it was reblued... I can take more detailed pics if anybody is interested.

Sold

It is 5/8"-24... Do it yourself, I did mine in a little over an hour. Dinzag can hook you up with everything you need, $30 for the die rental and $35 to have him rework your FSB and a little bit of your time is all it will cost you. I also recrowned my barrel while I was at it since it was pretty ugly, that was $20 for the tool rental

So we got some of the 7.62x39 into the store finally, I checked it out and it doesn't have a Wolf headstamp like the picture (which I'm guessing is a photoshop), but it looks exactly like Wolf. I'm considering ordering some, but I'm going to give it a little longer to see if we ever get any of the .308 in...

That's awesome, you are very good friend!

Exactly, it is close enough to work (mine was like 1/8" off), but my goal for this gun is to work anywhere from 50-300 yards and it is a hassle having to compensate or make adjustments for the windage all the time, so I want something that is truly centered. I reworked mine and it is pretty close, but it isn't perfect, it will get me by for a while. Was it offset enough to allow you to use the irons? If so, that's what I'm looking for. No, the one I have is the low mount one that sits about 1/4" above the dust cover. There are some higher ones, I THINK you can still look un

Thanks everybody! All hand tools. I couldn't get the gun to sit quite right in my press, so I beat the FSB off with a deadblow hammer, I had to use a torch, had to get the thing cherry red before it finally broke loose, major PITA...

It fits fine, it just isn't centered, the older style were like that apparently...

That's what I have, except mine was nowhere close to being center...

Good to know, thanks for the update. That's too bad that it isn't working out. I have been looking at both the DPH and the Texas Weapon System mount and I think I have decided to start saving up and just get the TWS mount and peep sight, I like the release it has so you don't have to use a screwdriver to take it down and you still can easily retain some sort of iron sight.

Updated pic... Just threaded my barrel and installed a JP Tactical Compensator, also have the csspec 20rd mag now too.

I got my FSB back along with the barrel threading and recrowning tools from Dinzag today, a little over an hour later I had my barrel threaded, recrowned, and got my FSB reinstalled. I was lucky (in my opinion at least) and had the .631" barrel, so I was able to thread it to 5/8"-24, which gave me a lot of standard AR-10 options. My main goal was to keep the gun from jumping off the bench, so I decided to go with a JP Tactical Compensator, almost as effective as the JP Recoil Eliminator, without the ridiculous looks. I decided to recrown my barrel also, when I got the FSB off, the end of