G-30

I use a Aimpoint on mine with no issues.

For the win, you can get fire sprinkler heads and install a line and a few heads over your safes.

I don't know about that I just got two 12rd Surefire mags and both FTF on the eleventh round every time. I think I saw a post where people were adding material to the follower to keep it from tilting too much.

I have two Surefire 12 round mags that both FTF on the 11th round every single time. I need to do somthing about them, has anyone tried to cut them down to 10 rounders? Would this fix the issue or would they just FTF on the 9th round.

Seems as though threds go off the rails fairly fast lately If you want to close this one that is fine with me I was just trying to post the info, it does not need all the commentary

On Sunday, May 1, the NRA filed its formal comments on the "ATF Study on the Importability of Certain Shotguns." NRA Comments

If you go this route most inground cystern tanks need to stay partially full to not collapse, there are some that are rated for being empty but I found that they were in the $1000.00 range for a 1500 gallon with a 24" man hole. The other thing you need to do is make sure it can't float out of the ground if you have a high water table by pouring concrete around the tank.

What there was sound I have mine turned down so did not notice.

Any of you guys see this yet?

Mine is a 4 port gun that will run Fed bulk pack 100% on setting 2 without the rail and will shoot at the most two or three rounds between FTEs with the top rail on. I am still trying to figure out why

I still have not gotten mine to work either, I drilled a vent hole through the quad rail and it did not make a difference. I did notice the top rail making contact in the area of the rear sight so I have removed some material from inside of the top rail, I have not gotten out to test it to see if this will make any difference.

Well good luck, mine runs 100% without the top rail on but will not cycle for shit with it installed. I guess if this latest mod does not work I will have to junk the quad rail and find a different way to mount my Aimpoint At least she looks ok

Yeah the booster puck did made a difference even though it still wasn't performing half as good as it did when I had just the tri rail on there. I'm gonna have to do a new test on friday and another video. With this new mod to the quad rail and the V plug I'm confident I'll get some better results. Also I wasn't expecting magic but at the low price with the positive reviews and Mike D's garantee that it would allow me to hip fire I figured it was worth a shot. Anyway here's what I did, hopefully it works I tried that on my Chaos extended quad and it did

Ok, care to share with a fellow Northwester

Um not 100%, I have the Chaos extended quad rail and it does the same thing as the OP's on my S-12. It looks like on mine it either binds up the gas system or it blocks the vent hole on the gas block too much. Yep I didn't want to say it but one of the guns I worked on had a Chaos rail, when the tri-rail was installed it ran pretty well, once the top rail was installed it would hardly cycle at all. That said I think it has more to do with the individual gun than any one rail design. I would agree, mine will run great with the tri-rail but not with the top rail on. So for some re

Um not 100%, I have the Chaos extended quad rail and it does the same thing as the OP's on my S-12. It looks like on mine it either binds up the gas system or it blocks the vent hole on the gas block too much.

Ok thanks, when both mags did the exact same thing I figured either spring or follower.

Anyone? I took them out again and exact same thing with high brass.

This is what I am thinking as it seemed to fire with the bolt not locked, The conversion parts were a CSS kit with a Tromix modified triger group. The bolt has been polished but no real material removed, and the hammer has been smoothed and polished as well.

Yes sir exactly like that. Does it affect your aim at all? Hopefully get out tomorrow to fire it for the 1st time w/the rail. No I use an Aimpoint red dot on mine and the rail is square with the reciever it is just the gas block is canted over. I drilled a hole in my extended top rail that lines up with the hole in the gas block so hopefully it will cycle the fed bulk pack again. Nice. Let me know if that works, may have to do it to mine. thanks. i pounded out the rear sight. Well the Chaos Extended Quad Rail is a no go, I got out today and it would

Ok well I will keep an eye on it.

Your gun is undergassed or something kept the cycle weaker than it should have been, so the carrier wasn't nearly as open as it should be at the point gasses escape through the ejection port, thus the gas was concentrated & more noticable. You wouldn't notice it if the gun were properly gassed, or whatever issue robbed the cycle of power, such as excess friction wasn't there & the gas wasn't as concentrated. Looks kinda like this, right? http://www.youtube.com/watch?v=edISFHD40NQ The wife says it was alot bigger than the video(Like it shot out about two feet), I

The thing was all I noticed was the shot sounded funny, but my wife was standing to my right and slightly behind me and said wow what was that. It scared the shit out of her.

Yes only once, with about 300 rounds fired since it was converted.