Jump to content

ktz784

Member
  • Content Count

    19
  • Joined

  • Last visited

Community Reputation

0 Neutral

About ktz784

  • Rank
    Member
  1. fog50 thanks for the lead ....
  2. Hello, Need your help finding replacement magazine catch for mka 1919. My new/used rifle is still in California DROS hold for the next 10 days. Where can i get this replacement part. I was thinking that the regular ar15 agazine catch will work, or ar10 magazine catch will work. thanks, smanuta
  3. did you change the handguard of your rifle? make sure you did the cover a small on the left side of the gas block?There a second hole for gas to escape, this will help push the piston back. Also, check the performance hammer spring, the spring is stif when new, make adjusts or go back to original ak hammer spring.
  4. Here are some items to check. 1. clean the gas tube with automotive brake cleaner, this will take out the burnout gunk in the tube. Remove your front handguard, it will be damaged by the brake cleaner. 2. clean bolt carrier with brake cleaner, remember the firing pin is stiff because it has a spring. To much oil and grease plus foul gunk can jam the firing pin.3. make sure the gunsmith drilled those gas ports in an angle... check around the forum.4. Need to clean / replace the guide spring front and back.5. check the condition of firing hammer spring, may need to replace it ... go for the per
  5. First, is the gun working with slugs (federal / winchester). Second, go for the carolina shooting supplies "reliability kit : spring, md arms plug, performance puck". Third, is your gun smooth when charging it.... if is smooth don't polish anything...check link inside forum for polishing on saiga 12. Fourth, last step if it goes ugly.... perform the gas block removal and enlarge the actual gas ports...check link inside the forum....
  6. File the remainning tap down, leveled with the trunnion. Then jb weld the bullet guide.
  7. did your iz132 have threaded barrel or did you thread the barrel yourself
  8. Nice rifle !!!! What was the rifle before conversion IZ332 or IZ132 ?
  9. All the big vendors are "out of stock". Need some suggestions where to to purchase IZ332 rifle.
  10. duracoat is the best.... get the $45.oo ezkit. Teardown your rifle, use expensive automotive masking tape to tape off area that you don't want to paint. degrese the area, (degreaser comes with the kit), then follow duracoat instructions. My friend, i have tried that home depot paint " heat temp stuff", the paint just melted with the hoppes No.9 solvents rubbing on topoff it.
  11. hammer is new and catching on the bolt. need to file & smooth the new hammer face down. Also did you modify the hammer on the sides, so the "bolt hold open lever" fits. If you bought the kit from css with modifed hammer, there won't be a problem. If you bought a seperate tapco g2 trigger, you need to modify it or take out the " bolt hold open lever out. Please take a look a css "carolina shooting supplies" picture of modified trigger $45.00. Also replace the hammer spring and disconnector spring, I replace mine less than 300 rds, just went new performance hammer spring $20 and disconnetor
  12. Don't forget to count the Magazine. Buy US made magazine (example: ak47 tapco magazine - counts as 3 part for 922r). If you have surplus or stock magazine, replace the follower & plate with us parts. Then the surplus magazine after replacing with US parts counts as 2 parts for 922r.
  13. Ca compliant bullet button - via solar tactical. Conversion kits just go CCS, or dinzagarms, other vendors in our forums.
  14. my friend please go through c.s.s - carolina shooting supplies or dinzagarms. Both vender have excellent package deals. I would recommend via internet for package deals (trigger group,stock,pistol grip). If you go via gun shows: only solar tactical -hayward,ca is a local vendor. good price too. At the gun show: i bought a fresh tapco g2 trigger group, but had to modify it like hell (especially the hammer) buy this via c.s.s .....less pain, california magazine bullet block for ak (solar tactical vendor $40.00).I just completed conversion on IZ332 saiga. Bullet guide .....got it from dizagarms
×
×
  • Create New...