13cent_killer

I have a 16" A3 upper for an AR. The maker for the upper is unknown to me. I bought this a few months ago and the previous owner thought maybe its an RRA. Hell I don't know. But it functions fine. The FSB has been milled down, kinda looks Vmatch, and the bayonet lug removed. It does still have the threaded barrel and flash hider. Very few marks on the rail and has a freefloat handguard. More pics available SOLD PENDING FUNDS $250 shipped CONUS without a B/C/CH United States Postal Money Order only please... I have trouble cashing other m/o's in the past.

I have a Taurus .41 mag in stainless steel finish. 5 shot cylinder with a 4-inch ported barrel and has the rubber grips. There is a very light scratch on the barrel . I'll get pics up soon if there's any interest. $325 shipped to your FFL ...CONUS

Positive (+) feedback for Cobra76two. A good guy to deal with... great communication and a lot of friendly advice on my questions For mags and some of his wooden inserts. Thanks Cobra

LoL !!! Never thought about that KYSoldier.... could always incorporate if not I guess. Thank you for the info Tony

Didn't realize how badass the S20 would look with the collapsible stock.. Nice!!! Wish I had the optics rail and shorter barrel on mine

Roadkill45 Mine has the 22" barrel and removing the factory stock actually made the OAL shorter, maybe 2" or so. Not sure what the length is on the ace stock though but in my opinion your overall length will still be shorter than with the factory stock. Just my 2 cents.

Here's a pic I took of my Saiga 20 after the conversion. Bought a digital camera as a gift for the family hehehe. Haven't refinished or painted anything yet. Again a big thanx to everyone who helped me through the process.

Have any of you fine gents registered your Saiga 20 as a short-barreled-shotgun with the A.T.F.? Or can you not do that with imports? If it can be done professionally, cutting barrel, opening up gas ports, threading for choke or for one of those badass door breeching attachments, ect..... How much $$ would this run? Thanx for any facts or opinions in advance. Oh yeah Happy Holidays to everyone on Saiga-12.com AAARRRRRRRRR!!!!!

Try Cheaper Than Dirt..... the last catalog they sent me had Wolf 00 Buck in it. They have a website too.

Good feedback for AegisDei. I bought an S20 mag from him. Good communication, shipped as agreed..... AegisDei is a straight shooter in my book. Thanks

Thanks Cobra... Yeah bro I meant the sight "rib", sounds like it could be a pain...I'll probably forget the idea.

How is the ribbed sight removed? Is it possible to buy these some where? I'd like to put one on my S20. If you mean that you have ribbed sights, and want to get ak style sights, then, to remove the ramp sights you tap the rear sight sideways out of the dovetail and then unscrew the front elevation knob and they will come right off. As far as getting the ak style sights, someone here might be able to help you find them. I bought mine off e-gay a year ago and paid around $70. OH I'm just talking about the sight rail thats on some of the Saiga shotgun. I couldn't find one for sale an

How is the ribbed sight removed? Is it possible to buy these some where? I'd like to put one on my S20.

OK I FEEL GUILTY.. Sorry I wasn't thinking... Good job Cobra

Thx Cobra. I'll check it out. The kvar stock I ordered wasn't the Warsaw length they listed so I assume its the longer of the two. I had this same feel with a side folder on the ak. Too short for my monkey arms!!!LOL

I'll try to get some pics up when I can... problem is I always have to borrow a camera. I'm seriously thinking about taking the ar stock adapter and the A2 stock off of my ak and switching it with the k-var on the saiga just to see how it feels. But, it's going to make her long again. It seems like all the ak stocks are short to me, I don't know, long arms maybe. I'm also considering cutting up some mags to make some 9 or 10 roundersHmmmmm!!! decisions decisions.

After shooting my converted S20 with a new K-Var stock... it feels just a tad short for me. I was wondering if any of you guys know if there is a 1" buttpad that will fit this thing. I saw tapco sells one but it says its for chinese and hungarian ak's. Thanks for any info

I had time to shoot 2 mags through it this morning and had no problems so it should be ok. I used the G2 single hook as well. I'm pretty pleased with the results of the conversion... not to mention it looks sweeet!!! I'm still impressed with the way the nylon hole plugs worked and look. A big thanks to everyone who responded to my topic on the conversion.

OK.... I'm making some progress. I've been working on the S20 conversion a little each evening. I went ahead and cut the pistol grip nut hole and mounted the saw style p/grip, did some polishing on contact points on fcg, mounted the trigger guard,installed fcg w/shep. crook replacement lever and my kvar stock should be here tomorrow. I'm sooo excited.. I guess the true test will be actually firing it and if it will cycle reliably like it was before I installed the new fcg. Do you guys have any advice/tips as far as the hammer needing to be modified any before firing? I didn't grind anything of

Oh.. here's a link to a printable ak template I found. Not sure if its correct for the saiga but i'm gonna print it out and see how it lines up. http://pookieweb.dyndns.org:61129/AK/docs/...emplate_Ace.pdf

Cool.... thanks alot. Which areas of the hammer need to be polished? Anyone got a pic? All my parts are on the way and I'm getting the tools together. I think I'm gonna hold off on the S.W.I.F.T. lever for now. smithwr3, if the blackjack gives me problems maybe I'll pick up an AK to put it in hehehe. RRRRRRRRRRRRR!!

I disassembled my shotty today just to take a look inside. Are any of the shotgun receivers already cut for the pistol grip nut hole like some of the Saiga rifles? I was shining a flashlight and trying to see but I don't think it has the p/grip nut hole. I can see that it has the military trigger hole. I might try to do a search for a template to lay on the receiver to get the correct specs for the p/grip nut hole. I've also read about having to "polish" the trigger. Whats up with that? Indy, I after checking it out I decided to go with the shepherds crook replacement plate. Thanx

Cool!! Thats what I'm gonna get. I wish my S20 had the mounting rail between the sights, can those be added?? I haven't seen any for sale so prob not.

I ordered the Tapco G2 U.S. trigger group today. I'm also gonna order the blackjack buffer and possibly the S.W.I.F.T. lever. Any of you fellas use the AK SAW style grip (like from tapco) on the S20? If so how do you like it? I plan on using the Binding post screw where the two rear rivets were removed so I guess I'll have to work on the stock some. Is there a mill type bit that can be purchased and used in a drill press? Any one tried using AlumiBlack, i think thats what its called, on the binding posts? I would think it would work well. Thanks for the info so far , I'll probably h