sndman762

has anyone had exp. with these scopes they are a bdc scope for the 223 thinking of getting one since they are around 120 bucks for a 3-9x40 but dont know much about barska or the scope so any help would be great

american eagle tactical 6-7 dollars a box

i looking into getting one of the pso scopes a buddy of mine has a 6powered one never been used for a 100 bucks my question is how high do they sit on the ak cause all the pics i have seen they look like the set high

i shoot american eagle tactical 55gr fmj they shoot almost hole in hole at 50yds

it may run great by it doesnt shoot great in mine

well i shot the rifle today and everything i shot shot good at 25yds but when i moved it out to 50 the only ammo that shot good was american eagle tactical 55gr fmj almost hole and hole

i was thinking of the normal sling i could thread through the loops

i think im going to keep everything stock on this one was wondering what type of sling should i use with the stock swivels

no i dont all i have is a phone camera and it doesnt connect to the net but i can tell u that i lines up with the bore of rifle and sits almost on top of the dust cover

i like the gun the way it is so ill probally just put some new swivels in it and maybe a trigger, how easy is it to put a trigger in it, i see alot of (drop in) ones but are the really drop ins

is there any stocks for the saiga that dont require moving the trigger group

i have a stock saiga and i dont like the sling swivels that come with it is there normal swivels i can put in there or am i stuck with them till i get a different stock for it, also i want to put a pistol grip on the stock it came with is that possible or again do i have to get a different stock

so when u clean the tube with hoppes #9 how do you get a patch in there to clean the hoppes out or do you just go over it with the oil i have butches bore shine to clean all my guns but i dont have a patch big enough to remove the shine from the tube so thats why i used the gun scrubber i just sprayed it in there let it set then i took a 12ga brush swipped it out a couple times then put some clp on a bore mop and ran it through a couple of times

do any of u guys use gun scruber the sell it at walmart i got a can to clean out the gas tube looks like it worked then i oiled a 12gauge mop and ran it through a couple times with clp on it

this is the mount i got and it works great lines up over the bore has a locking nut with a little nub it sits in so it doesn't move and the scope doesnt lose zero when u take it off, i didn't notice the little nub before but i dont have to use loctite now

well i got my mount that i posted in the mail was wondering would it be wise to put some blue locktite on the locking nut on the scope rail

here it is

let my rephrase the question do u think that the svd stock on cheaper than dirt would fit the saiga

im thinking of ordering a new stock for my saiga thinking of a svd stock i seen in a cheaper than dirt magazine but i dont know if it will fit though

what kind of cleaning rod do u all use, the rod i use seems to be to long cause when i slid the patch through the rod is somewhat at a angle and i noticed the paint on the rod is getting scratched off

i looked at my manual it says 4 shots 124mm spread at 100m what is that in inches and is that the norm for these rifles, also what twist does this have ive read they come in 1in7 1in8 and 1in9

finally got my saiga in took it apart cleaned and lubed it up, i have a couple questions 1 do you guys put oil on the piston or run it dry 2 how do you go about cleaning the gas tube looks like i can fit a 12 ga brush in there but dont think i should chance it till i here from u guys with the exp

sweet im glad it wont be packed full as far as the lube i always use clp thanks guys for the info

i havent got my saiga yet but was wondering what u all use to clean the packing grease out of these guns, the last time i had a sks i used break cleaner but it took some of the blueing of the rifle

im not a big fan of mounting anything on the dust cover i had a sks i did that with the scope never held zero dont know if the ak is the same way but just dont feel comfortable with the dust cover mounts this is what im looking at for around 50 bucks fits low on the dust cover and says it lines up perfect with the bore of the rifle