Jump to content

lksyotas

Contributor
 View Profile  See their activity

  • Content Count

    91

  • Joined

  • Last visited

 Content Type 

Everything posted by lksyotas

  1. lksyotas
    Built this rifle about a year ago from a stock Saiga IZ-240. Rifle conversion includes welded rear trigger holes, Tapco G2 trigger set, bullet guide, Bulgarian AK-74 rear sight leaf, Russian AK-74 gas tube and upper hand guard, Russian lower hand guard, Bulgarian FSB, Bulgarian muzzle brake, Bulgarian gas block. Entire rifle was refinished with semi gloss bake on finish to match current Russian paint. Bulgarian thumb hole stock was added and front bayonet lugs were milled down to make the rifle New York State compliant. Rifle will come with three preban Polish Tantal 30 mags,
  2. lksyotas
    As title says, I am looking to sell my STI Spartan 9mm full size 1911. Finish is in good condition – starting to get a bit of wear on the muzzle end of the slide from the holstering. Used in four IDPA matches. Gun runs flawlessly with the factory and Tripp Research Cobra Mags. This gun runs great! I have not had one stove pipe, FTF, or any other hiccups. Only selling to finance a new AR build for 3 gun. Comes with the following: •VZ Grips – Recon Dirty Olive G10 •Smith & Alexander magwell w/ 20 LPI checkering •STI standard width stock wood grips included •Adjustable rea
  3. lksyotas
    As title says, I have set of AP Customs 4x4 shell carriers for sale. I purchased these to outfit my 3 gun rig but ended up going with an alternate load technique. These are like new and only taken to the range once for a single practice round - never used in competition. Each comes with Tech-lok belt fastener. Looking to get $55 shipped per or $100 shipped CONUS for both. PP (gift or +3.5%) preferred payment method. Email or PM me with any questions. First "I'll take it" gets them. Thanks for looking. Also, this will be cross posted.
  4. lksyotas
    I’m looking to sell my Stoeger M2000. This gun is a 12 gage and is fitted with a 28” vent rib barrel with orange fiber optic bead. It has 250 shells through it and fit and finish are in like new condition. It was purchased less than a year ago for hunting and sporting clays as a low cost alternative to wear and tear on my Benelli M1. It features a hard wood stock set, hard anodized aluminum receiver, and parkerized barrel with hard chrome lining. (I'm only selling to put a down payment on a new Remington Versa Max.) Stoeger is owned by Benelli and utilizes their patented Inertia Drive
  5. lksyotas
    BTT...
  6. lksyotas
    Selling my last Saiga 12 magazine. Its a standard black AGP Gen2 10 round magazine. Used but not abused...always worked flawlessly. $25 shipped CONUS. SOLD to kbau5709 PP (gift) or Postal MO's are accepted payment methods. PM or email me with payment details. Thanks for looking.
  7. lksyotas
    BTT...I can't edit the original post now but I'll let the whole package go for $130 shipped CONUS. If you don't want the Tacpoint, I'll sell just the mount for $100 shipped CONUS. PM me or email me for payment details. Thanks for looking! SOLD and shipped to tlag95
  8. lksyotas
    As title says, I am selling my Molot GK-01 muzzle brake. I purchased this straight from Moscow a few months back and sold my last Saiga 12. So this is up for grabs. It is the most effective muzzle brake I've encountered for this type platform. (Do a search for videos and such if you haven't seen them in action. I posted a few shooting various loads. High power slugs and buckshot feel like the cheap bird shot bulk pack with this brake installed) Looking to get $175 shipped CONUS. SOLD to johnboatcat PP (gift option) or Postal MO's, or personal checks are accepted payment
  9. lksyotas
    As title says, I have a new pair of MSA Sordin Supreme Pro-X head set for sale. The set is packaged complete as new including batteries, manual, AUX cable, and headset. Included in this sale are new gel ear muffs. The gel earmuffs are an upgrade to the standard set – they improve the db rating as well as provide longer comfort durations over the stock ones. I purchased this headset last week from SRS Tactical and they just arrived. Love the quality but unfortunately, they don’t open far enough to fit over my large head so they are going up for sale. (I want to avoid sending them
  10. lksyotas
    BTT...still available!
  11. lksyotas
    As title says, I am looking to sell my new RS AKM mount. Purchased this mount a few months back to use for three gun on my AK-74 but am going to stick with iron sights. Mount was installed on rifle rail but never taken to the range so its essentially new. The mount allows for a very low sight axis as well as centering it over the receiver. Very rugged and awesome mount for 30mm optic tubes. It currently has a Tacpoint red dot scope installed. The Tacpoint (now discontinued) is an Aimpoint clone. It has clear glass and operates the with similar mechanics as an Aimpoint. I am open to
  12. lksyotas
    It does include the two bolt on tri rails. Garnaz, If you still want it PM me for payment details. Thanks in advance!
  13. lksyotas
    As the title says, I'm looking to sell my Chaos ext. quad rail and Burris Fastfire II. The quad rail is in excellent condition . And the Fastfire is like new - only two trips to the range. The Fastfire comes with standard picatinny mount plus custom fit rear sight mount that fits right into a Saiga 12 rear sight cutout. Looking to get $80 shipped spf to garnaz for the Chaos rail set and $200 shipped sold to jojo200517 for the Fastfire set. PayPal (+3.5%) or Postal MO are accepted payment methods. Shipping is CONUS only. PM me or email with "I'll take it" or any additi
  14. lksyotas
    I’m looking to sell my 19” 2010 Saiga 12. I bought this shotgun new from Greg at Carolina Shooters Supply back in late 2010. Has aprox. 1000 rounds down range of mostly Federal bulk pack shells. The following mods have been done to this gun: Did a full restore on it including filling the original trigger holes, adding custom made trigger guard from demilled bulgy kit to match original 12K style riveted in place. Drilled three gas holes at proper angle to .093”. Opened up gas block to clear all three holes. Polished all engagement surfaces on the bolt lugs, rails, Tapco G2 trigger set
  15. lksyotas
    Superb work! Great attention to detail! Did you measure each component or eyeball it? Either way, truly awesome work! Best I've come across. Way back when I was in college, I modeled an M4 carbine in a similar fashion. But this is way more detailed especially the internal details. What CAD package did you use for the design?
  16. lksyotas
    Here is a quick video of my Saiga shooting a couple of Remington Buckhammer slugs - it really shows the brakes efficiency with high octane loads! Loving this brake! Great design...
  17. lksyotas
    If you change your mind on the style, I have a very good condition one from Cobra one with full choke installed but it is the smooth end. PM me if you would like to discuss further.
  18. lksyotas
    Hey guys, I am waiting for my new GK-01 muzzle brake to arrive from Russia (I purchased two from Maxim in Russia) and over the next two weeks while I'm waiting for them to arrive, I need to locate and purchase a full choke to thread onto my barrel and mount the muzzle brake to the end. I currently run a Cobra Custom part that takes win chokes. But I won't be able to use it once the muzzle brake is here. I tried to buy one from Maxim but he was out of stock on them and didn't know when they would be back in. Any thoughts or links to a place I can buy one? Thanks for any help! Picture of
  19. lksyotas
    PM sent with question on Chaos rail set. Thanks in advance!
  20. lksyotas
    AK-74M or series 100 stock for sale. No hardware, just stock. In excellent condition! $100 shipped CONUS SOLD Discrete PP (+3.5%), personal checks, or Postal MO's are accepted payment methods. Will ship Priority Mail. Email me or PM me with "I'll take it" This stock is cross posted - time stamp in PM's will be honored. Only trade at this time would be for a Vortex Strikefire red dot. Thanks for looking!
  21. lksyotas
    I had an issue with my Saiga 5.45 conversion feeding the last bullet also. I ended up fabricating my own from a chunk of low alloy steel. Dremel and files were my tools. I found a few pics of a demilled AK-74M online and wanted to match that one as closely as possible as I'm trying to recreate an authentic 74M build. Anyway, the guide is screwed into the trunnion and functions 100%. I will be filling in the top of the flat head screw with JB weld and grinding it flat to represent a false rivet to make it blend in a bit more. It's not perfect by any means but I'm satisfied with the result
  22. lksyotas
    Looking for a Russuan Type C AK-74M or AK-100 series FSB. I already have the correct long collar brake - just can't find the FSB anywhere. Let me know if you have one or where I can find one. Thanks in advance! Example of what I'm looking for:
  23. lksyotas
    BTT...lowered price to $500 shipped! Sold pending funds.... Thanks for looking!
  24. lksyotas
    Finishing up my Saiga 5.45 conversion and need to re install the magazine catch lever retaining pin with a new one. Please let me know where I can get one or if you have one available. Thanks in advance!
  25. lksyotas
    Looking for a Bulgy bullet guide to add to my Saiga conversion. Let me know if you have one and what the price is shipped. Thanks in advance,
×
×
  • Create New...