Jump to content

yodaman_84

Member
  • Content Count

    15
  • Joined

  • Last visited

Community Reputation

0 Neutral

About yodaman_84

  • Rank
    Member
  1. Thanks MSA....I was gonna ask what specific areas I should get polished, but I just saw the video on your website. It looks like that one was polished. Funny that you said that, because last time and even today the frame of the rifle was hotter than normal. So much that it stood out. Thanks for everything guys! If your ever in So Cal email me and Lunch is on me! Plus you have a life buyer from your website!
  2. Thanks MSA!.. I actually cycled the bolt real hard a few times and It seemed to be working again THANK GOD! So I took it to the range and put maybe 50 rounds through it and it worked great! There was one time where it seemed like it wanted to stick but it didn't . The guy at the range (who is not a gunsmith) said it may just be that it is somewhat new and just breaking in ???? How true could that be?
  3. Can you guys guide me any farther based on what I replied?
  4. Thanks for your patience guys! OK...I did MSA's test 1-5 and the FCG seems to work. 1. With the bolt, carrier, and recoil spring in the rifle (but the dust cover removed), cock and dryfire the rifle but keep holding the trigger all the way back. 2. While still fully depressing the trigger, cycle the bolt. When the bolt locks back into battery, observe the position of the hammer. It should be held under the disconnector hook. 3. Gently release the trigger. The hammer should click as it switches from being held by the disconnector to being held by the sear. It doesn't do it right
  5. OK...Ok...I think were on to something here!!!!!!!!!!!!!!!! 1. With the bolt, carrier, and recoil spring in the rifle (but the dust cover removed), cock and dryfire the rifle but keep holding the trigger all the way back. 2. While still fully depressing the trigger, cycle the bolt. When the bolt locks back into battery, observe the position of the hammer. It should be held under the disconnector hook. 3. Gently release the trigger. The hammer should click as it switches from being held by the disconnector to being held by the sear. When I do this the hammer does not switch to the trigger h
  6. Guys, I will try all these WONDERFUL tips tomorrow 03/09/11. Its dark here no and I would like to do them in a brighter, well lit environment I will get back to you soon....
  7. Could it possibley be due to bad greasing? Should I look into getting one of those thick lubes for the rifle?
  8. To be honest ...no. Is that messing things up
  9. Guys, I also wanted to add that when I cyclce the bolt by hand the trigger resets perfectly....
  10. Thanks soooo much for your quick replies! Like I said Im still really new with Saiga's so thanks for bearing with me.... I do believe that the acces spin is not trying to move if Im correct. The manual isnt rto helpful but I believe that I am looking at the correct part. I am in California so my .223 is as stock as they come. I was only able to get one picture attached because of size….let me know if it helps or if there is a better way to get pics across
  11. Help! I took out mt Saiga 223. today and shot maybe a 100 rounds through it, and it worked great. Towards the end of the day the trigger stopped reseting! It wouldn't reset and seemed really floppy. It did cycle because there was a round in the chamber after it fired, but when you pulled the trigger again nothing happened! I would pull the charging handle back maybe a 1/4 of an inch and the presto, it would fire the chambered round and then the trigger wouldnt reset again. I diassembled it, dropped some oil and it would fire two rounds and then start the whole thing with not r
  12. Does anyone know where to get 10 Round Magazines that look full/high capacity. Like the ones that they use for AR-15's in California so they meet the 10 round law but look full capacity. They would be for a Saiga .223?
  13. Thanks! Another question. Does anyone know where to get wooden stock and forend for Saiga 223. No oistol grip because (dont want to convert/California). Just stock and forend
  14. Hi all! I'm new to Siaga, I just got a .223 and didn't see any gas selector valve like my Yugos SKS has, and I din't see anything in the manueal.....Does the Saiga have one? Thanks.
×
×
  • Create New...