Okaraider

Is there any way to tell 223 from 5.45 promags. A local shop has but they do not seem to be marked? Im looking tor the 223 version.

Uy broken gas tube lugs sounds like a nightmare!! Everything seems tight and in tact so I don't think ill try the punch again. I might try the dremel and if that does not work maybe ill move towards a new sight. Dave M which sight did you replace it with?

Ok so I want to drift the rear sight on my S12. I tried a punch and hammer but it will not move? Im not wailing on it but I would have thought it would budge. I already soaked it in oil. Am I missing something?

I put one on my S308 and took it off. I did not like how the trigger felt in relation to the Pgrip.

First are the 223 or are they rated for 5.56? Second is it true that with many Saiga 223s you dont need a bullet guide when converting? Last do you need to cut a P grip hole on all Saiga 223s or do some have them already? Thanks

The stock is right up against the tang. I think IM going to call RAA back and see if they will fix it? Thanks Oka

Putting the hammer back in can be a real, need 3 arms and 4 hands experience and I think the way the spring can slide all the way around the hammer sometimes spazes people out.

I found a local stash of PMP Port and it is a little dirty I think but shoots great.

Super Tactical I got the Tapco one from CSS, It came in 2 days. I like it personally.

Which Rotozip do you use and what attachments? Thanks

Hay what size do you use? Thanks

Who is Cadiz Gun Works? This one shoots pretty straight.

Ya no wobble. It goes in tight just a little crooked. Is there any change being out of line like this will damage something? The Stock? Is it something to send it in for?

I for one do not see anything wrong, but again those are not the best pics...... So what is wrong with her??? The stock seems to veer to the right (Left in the pics).

I called RAA when I got the gun and they where very cordial. Infact they wanted me to send the gun in. But I thought forsure it was the stock and they said they would send me another stock. . But over Christmas I tried another stock and It sure looks now like it is the gun? Tell me if you see anything? Just wanted a second opinion before I call them again.

What is a Rotozip? Thanks Oka

Actually this is the top of the lug that the bolt turns into (Rather infront of) on the right hand side of the trunion. Thanks Oka

The front top of the right lug on my 308 is getting a shiny spot? It was actually there when I got it. The front of the lug is still black as is the rear of the top. I looked on my other AKs and they kind of resemble it but none have this deep black finish so it is hard to tell. Does this sound normal?

Has anyone had warranty experience with RAA? Is it good? How long did it take? Thanks Oka

Do the Tapco interfuse foreend and folding stock fit on the 308?

Here is the one I was looking at? It says you need a new front whole but it looks like you need one for the Pgrip? http://ramsfs.com/pictures_stg.aspx

Ah See CSSpecs!! That was my thoughts too. Im much beter with a dremmel than I am with a drill. I was wondering If I could just dremmel the welded spot off and If I get you right thats what you did. Will a dremmel do or do you need a bandfile? Is there anyway not to have to dill holes for the trigger guard? I saw one you can buy that has 2 holes and screws? One screw fits in a whole left by the front rivet and I figured the second will just fit under the Pgrip and maybe it can be secured with the grip? I looked in mine and it sure looks like I have a Pgrip hole down there?

Try moving that "ledge" a few degrees beyond vertical, apply pressure (up) to the gas tube, then return "ledge" to vertical. It takes a little wiggle is all. Should pop right out. You DID remove your BCG, right? Thanks Bohound. Ya the BCG was out. I thought Id tried actuating the lever but Its probably worth another try. Thanks Oka

Is there a special way to get the Gas tube out of the sight block for Saigas? I can rotate the Arm just fine. Ledge is vertical. The Tube moves about a 1/4 inch and then no nogo! I can smack it back down and bring it right up to the same position but no farther? Any Ideas? Thanks Oka

So let me get this right? Your telling me that those are not 2 spot welds just infront of the trigger but inside the guard on either side? Thats the only thing I need to do to get it ready for a new FCG and grip is to take the heads of those 2 rivets? Thanks Oka