reapur
Contributor-
Content Count
31 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Everything posted by reapur
-
Does anyone make these for the IZ 109? I really want to put a rear sight on mine somehow
-
question for the experienced fellas here, how does one decide which LOP length to go with? Also what are the beneies of left folder vs right folder. I'm going to SBS my saiga12 and I'm getting one of these stocks I just can't decide on the variables. Thanks
-
OK, so I took off the gas block per this: http://forum.saiga-12.com/index.php?/topic/33836-modification-to-repair-fte-issues-on-saigas-with-blocked-gas-ports/ Pauly the tools you provided say .09, .08, .07 I have three ports, one was .07, the other two were smaller, so I took a drill bit that fit in and just ran it a little bit, now I can fit the .07 in there. Then I worked the .08 in by hand, just inserting a little bit and turning, and now they are .08. Now I'm wondering if I need to make that hole into a D like that post says, since one of my ports is almost totally blocked, but it'
-
Hi Guys, Holy cow, it's been a month since I last went to the range, how sad! Anyhoo, I wanted to thank everyone again, I got the siaga cycling I basically went back to stock parts (all this with Federal bulk) and it kept failing. I tried the CSS puc, noticed an improvement , but got stuck again. I remove the stock plug and used the vplug, better, but still jams once in a while. I then used the softer CSS spring, Vplug on the second + and it started to cycle properly. I shot about 75 thru it without any jams. Then I tried some winchester, and I'm convinced this ammo is crap in the saig
-
Thanks guys, Wow, awesome feedback. I do have a bunch to try. I have a css on order. all OEM parts restored waiting a trip to the range for testing. My quad is Chaos It's really hard to put 500 rounds thru it when I basically have to pull out every other shell by hand. It fails to eject at least twice on a 10 round mag, sometimes even every other shell (it's super irritating) Pauly I got all the tools you sent, I'll see if I can break the gun down and get to the ports to measure them. I'll use the stickied post for guidance. I'm 99% sure it's a gas system problem, the action is so smoot
-
Thanks guys, I couldn't make it to the range today to test out all the suggestions, but I will in the next couple days, hopefully the weather holds up. Thanks for the suggestions and the link to open up the ports, I do wish they would have done this and then let us control pressure with the gas plug. cheers
-
that's right it is an etac. I'll try that, maybe I can get to the range today Ammo is walmart federal bulk, and winchester bulk. I tried cycling some federal game loads also same result. I honestly can't remember if I cycled high brass through it, maybe last year.. cheers
-
Hi Guys, I have a converted s12 that is cycling like crap even after I did: 1- replaced the spring with the css performance recoil spring 2- MD arms vplug 3- Glassbolt by pauly (oooh the action is soo smooth now) 4- I got a puc from a company that is no longer around, can't remember the name but it was supposed to clean the gas port while cycling. I've noticed this puc doesn't run up and down the gas port smoothly, it kind of sticks to the sides and needs a bang to get it out, so maybe it's time for a new one. When I look at the gas ports, I cleary see two and one is kind of half e
-
I had the spike kit. It would not fit on mine because I have the V-Plug and the forward piece wouldn't clear. I'm sure a dremel could've fixed it but I didn't want to mess with it so I sold it. Over all the kit was top quality, I got it fitted somewhat and it looked awesome and felt really good and balanced, although I don't think it would accommodate a 20rd drum very comfortably. Just to add, I saw on their site they have a "sidewinder" kit that somehow rotates the receiver so that it ejects down and mounts the mags/drums to the left.
-
I had this laying around when I got my saiga 12 and I fully expected it to fall apart, but it's still holding strong after several hundred rounds of birdshot mostly http://www.ncstar.com/scripts/prodView.asp?idproduct=136
-
FS - AK 47 / 74 Bull Pup Quad Rail Kit
reapur replied to Boba Debt's topic in Unsorted Ads prior to November 2012 (WTS / WTT)
Can someone please tell me which recoil pad that is on the stock? I have a similar setup and I haven't been able to find a pad that fits thanks -
I have a brand new, never fired Saiga 12 shotgun Spike kit from center balanced systems. I was going to buy another saiga 12 to mount this one but now I want to sell it to fund another project. http://www.cbrps.com/Products.html Super nice kit makes your saiga 12 shorter and more maneuverable in rooms. This kit also had the $80 Black anodizing done to it. No carry handle. SPF I'm asking $260 for it. note, new this kit costs $280 plus $80 for the anodizing. That's $100 OFF. Please PM me with any questions. It hits my phone and I can get back to you quick.
-
Can someone help with this: How long is the Tromix stock? I have a Tapco T6 and I have found a setting that works well for me. What do I measure to see how "long" the position is so I know which of these stocks at CSS works for me best. I'm going to convert it to a folder. Thanks
-
WTS: Chaos Extended Quadrail - as new
reapur replied to motoguy's topic in Unsorted Ads prior to November 2012 (WTS / WTT)
As usual, I'm late If this falls thru for any reason,can I be next in line? -
OK. I'm ready http://www.sears.com/shc/s/p_10153_12605_04607711000P?sid=IDx20070921x00003a&ci_src=14110944&ci_sku=04607711000P Bring on the bacon ban, I'm fully stocked
-
Thanks Guys for all this info. Thanks Pauly for responding. I think I'll actually try all the suggestions. I didn't think of swapping out the pucs for the testing to get a baseline, looks like this will take longer than I thought. I'm off now to find the faq on the gas ports, just to make sure I got what is a minimum... One more question, not sure about how the law on this is, but can I send Pauly the whole gun to work his magic? Not sure I have the know how to take out the trigger group and the other pinned parts. Thanks again, I'll let y'all know how this unfolds.
-
Hello, On the maiden voyage, the saiga failed me big time. I bought it converted a while ago, but only got to test it last week. I tried it first with the stock plug and puc, couldn't cycle a single shot. Using Federal 7-1/2 and remington 7-1/2. This was using the 5/10/12 round mags and the 20 round Drum. Then I swapped out the the plug for the Vplug The puc for one I got at CSS (two came, a standard and a magnum, I used the standard puc) The spring for one also from CSS (seems softer) On this I got a little better results. The magazines cycled almost all properly on setting 5 on
-
I know many have seen this but I just wanted to raise awareness... http://www.wnd.com/index.php?fa=PAGE.view&pageId=292025#ixzz1Kw93yMVO I can't find what the NRA is doing about these things, the shotgun study or this, anyone have any insight?
-
hmmm, I'm trying to decide if I need more than one...
-
Would folks be interested in a new US-made semi auto 12 gauge platform
reapur replied to Wildcatter's topic in Saiga-12
I'm also for a Mag or Drum fed KSG type shotty. -
No recoil? How? That is one nice s12 but I've never seen one with such non existent recoil. Maybe he's just strong as an ox. A proper magwell sure make a world of diff for those quick reloads No one has won the USPSA Multigun Championship with a Saiga YET. Look out for Clint Upchurch, who won Open division at the Ft. Benning 3 gun match last December, beating some of the best in the US with an R&R Saiga. Clint should be back at the USPSA match this fall with his new R&R Saiga (He is now an official R&R sponsored shooter). I'll be there too, hoping to win 1st Open
-
I don't know how much this particular model used to sell for but when I bought mine, stock versions were around $500, so this is a little higher but it maybe due to the (new) panic!
-
The skateboard tape is a good idea, I may have to try it. I wrapped mine with Hockey tape, very good grip, and takes 30 seconds to put it on and comes off with no gooey residue. and it's cheap
-
I researched Krebs sights and I really like them. At first look it seemed like even I could install them. yet, I tried, mildly to remove the current rear sight on my siaga, and it seems impossible. Jeez do I need to melt it off?