MindRiot
-
Content Count
191 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Posts posted by MindRiot
-
-
That wouldn't restrict one from importing the 8rd magazines separately anymore than it would restrict one from making the >5rd magazines for the platform as they are now, would it?
The person that mates the >5rd magazine to the foreign made shotgun is responsible for complying with 922r. US Made Magazines can be a big part of that, but it's always doable through other routes as well.
Don't get me wrong, IMO it's absolutely free will - you guys import what you'd like. But as I stated I doubt there's interest in importing those from the WPA/SGM team because SGM makes the mags themselves which certainly is a motivator to bring the platform into begin with, marketing magazines.
Actually it would restrict the shotgun from being imported if the 8rd magazines were allowed to come into the country. If someone else did it that would be a gray area if we did it it would be black white and red ink all over our permit
-
http://www.atf.gov/firearms/guides/standard-restriction-stamps-for-import-permits.html
On the form 6 used for importing shotguns
20. Note: This permit does not authorize the importation of a shotgun with a barrel of less than 18 inches in length or an overall length of less than 26 inches. This permit also does not authorize the importation of a shotgun having a magazine capacity of more than 5 cartridges. Further, this permit does not authorize the importation of a shotgun regardless of barrel length and overall length if the shotgun is equipped with a detachable folding shoulder stock or is not designed to be fired from the shoulder.
-
No time soon, but I'm a fan of these too, so I'll be pushing and you keep pulling!
-
The SKS and the Mosins are not exportable from Russia directly to the USA due to them being either specifically restricted (VRA) or still being considered "war material" which is not allowed to be exported from Russia.
There will always be more new stuff coming in to the country from Molot, I'm grounded from discussing anything for a while. :-(
-
They do not have the ambi safety
-
They're here!!!!!!!
-
2
-
-
Looks good to me
-
1k total ya'll be there or be square, if you don't get one of these now you could be waiting a looooong time for more, as in years. If you buy one now and don't like it you can always sell it for a huge profit if O'Bama gets re-elected or just a little profit if Romney gets the job. 15% of the US are multiple gun owners 370 million x .15 is ~5.5 million folks that own more than one firearm, that's alot of potential buyers out there, and outside of a few forums no one is advertising these yet. You guys were the first to know and will probably be the lucky ones as the rest of the population finds out they'll be all gone........
-
1
-
-
I'll check with our machinist and see what we can sell the modified trigger set for. We're not set up for direct sales, no way to take CC or personal checks, but I may have a way around that.
-
Look at the hammer very closely. The Vepr hammer has a large cut out to clear the cross pin that the G2 doesn't have. You either have to do a lot of dremel work or have a friend with a mill.
-
There might be something similar coming in, but it's a long way off if it was to come around at all
-
We will be offering the Vepr 12 once they arrive later this fall and are looking forward to the new offering.
Any idea you can share as to what configuration you are going to be offering them?
More than likely as is in the picture
-
what's the diference between the 030 saiga that legion has and atlantic sells and this vepr? thanks
Where to begin? 1. 1.5mm receiver 2. Self regulating gas system 3. works with damn near any ammo 4. Comes from the factory ready to go, no mods needed 5. Actually available in this configuration in 3 weeks
more to come
-
1
-
-
Ours will be coming with no slant cut, I repeat, no slant cut receiver on the Molot Vepr-12's. That is all
-
3
-
-
On the water, just a few weeks away
-
SGM tactical has a bolt on lower and I've successfully trimmed out some plastic lowers without heat shields
-
They're not here, but they're on the way
-
5
-
-
I have never had a issue from SGM magazines. Why not contact SGM and see if they would swap the mag out before doing all the crazy stuff to the mag? They have like a year or three year warranty.
-
Is it going to happen? I thought a bridge issue was still causing issues. It was cancelled in spring because of it.
-
testing time!!!!
-
3
-
-
The prototype 10 round mags are in and ready for testing. whatcha think?
-
1
-
-
we will be testing the 10 round mags over the weekend and if there are no tweaks to the mags we expect to start production next week. so be on the look out in 2-3 weeks for the 10 rounders to hit.
-
1
-
-
still working on it
-
very very promising. don't believe any rumors about the vepr 12!!!
-
1
-
Saiga bullet guide in my Vepr?
in Vepr 5.45
Posted
If you use a punch slightly smaller than the original hole you drilled you can break up the broken tap and push the pieces through the trunnion so you can try again. I have done this several times in particular using the 6-32 tap. I have changed my ways and use a larger tap/screw combo and modify the bullet guide to accept the larger screw.