Jump to content

BullF-16

Member
  • Content Count

    30
  • Joined

  • Last visited

Everything posted by BullF-16

  1. I also bought another Saiga 12 at the match from another shooter just in case they get banned. I hope they don't and I wrote a letter to the ATF for public comment. Pat . I shot my R and R targets for the first time at a match this past saturday at the DoubleTap ranch in north texas. I placed 2nd in both shotgun stages out of 29. the only one who beat me was using my new Tromix S06. He only beat me by a little over a second per stage because i let him use my 20 rnd drum. I had to reload each stage. That does it, im dumping the 150 bucks for one of the 20 round mags RandR makes!
  2. What do I think? Booster puck V-plug... This made both my guns run from the hip with even the crappy winchester value packs. Even with the V plug on setting 4. I have a v plug and booster waiting for my Tromix S06 which should show up Tuesday. Definitely the way to go.
  3. Now don't do like me and misplace your magazines for it. I got mine Thursday and have torn apart my house looking for where I left the magazines at and have yet to find them. So make sure you know where they are located at before it arrives. Also if you take it apart to look it over when you put back on the top cover pull the charging handle back while holding down the cover to make the button pop out of the hole. I scratch up mine to the point I said screw this I am calling to see how they got it to pop out of the hole cause prying at it with a screwdriver was not working.. Now only if I had
  4. Tony just sent me my UPS tracking number for my S06. been waiting since Jan 3. Hope its worth the wait. I'm sure it is.
  5. Any of em better than this.. ? I doubt it. I only have the 1 currently, but she's a beaut!! I'd really like a couple more for future, (as yet undetermined), projects, as I said. fin I also have 3. Bought em a few months ago when this ATF thing first came out. I could have bought a lot more but didnt. i only want/need 3. I would consider 2 of mine better......I have an RandR targets gun and should receive my Tromix early next week. Tony is finishing it up this week. Its an S06 with bbl cut down to 18". Didnt want a perm attached flash hider, wanted the flex
  6. I love my booster pucks. have one in my stock K-var and my RandR targets gun, along with v-plugs. neither gun cycled the bulk pack while shooting from the hip, now they have no problems. i can even shoot the low brass on setting 3 from the shoulder with only a couple FTEs...perfect on setting 4. I even have one on order and another vplug (in the mail now) for my Tromix S06 which is being completed this week. should have it next week.
  7. Id say just add a booster piston and Vplug and be done with it!
  8. yes, especially since i installed a Vplug and MDarms booster piston. shoots the bulk pack on setting 4 from the hip 100% I know the mag chock full of #1 buck will go boom on setting 3
  9. Just order the new MDarms booster puck and be done with it. Thats all you will need.....and maybe a V-plug for good measure
  10. I recently received my new RandR targets tactical gun. it would not cycle the low brass walmart stuff reliably. I would have 1-3 FTEs per 10/12 round mag with the stock plug. Its a 4 holer and nothing is covered up. I then ordered a v-plug and a KA puck. Tried the gun with just the v-plug and same thing, even on setting 5. Popped in the KA puck and viola! Flawless since. I have tried to shoot from the hip, and no go even with the KA puck. I stumbled on this thread and just ordered 2 boosters. One for my RandR gun and one for my stock Kvar/Arsenal. Will order another booster and v-pl
  11. They make a clip for the Saiga?????
  12. I've shot about 30 or so of them thru a stock arsenal S-12 and a sweeter than hell RandR targets tactical gun. Neither gun would run them on setting 1 with the stock plug, no problems on setting 2. I have the MD arms V-plug in both guns now and they only run on setting 5 (most gas). So they are a little weak in my opinion but cycle fine on the correct gas setting. They also dont kick nearly as bad as buck shot loads. For the price....cant beat em.
  13. My new RandR targets tactical gun would not cycle the federal bulk packs reliably. I dropped in a v-plug....a little better but still a couple FTEs per mag. Dropped in a KA puck and what do you know. Not a single FTE in the last 200 or so rounds!!!!! The KA puck helped me out with slightly undergassed gun. YMMV
  14. Well took out the RandR targets gun again yesterday with the new parts. I put in the V-plug and emptied a couple mags of remington heavy dove 7 1/2 shot. I had an FTE with each mag. I put in the KA puck and shot a hundred rounds of various low brass cheapo specials. Not a single problem. I think the KA puck definitely helped my reliability issue. Didnt need the reduced power recoil spring
  15. Take the paper clip.....I just looked real closely at my new Arsenal S12 I got from K-var. It shoots great, even birdshot. I was curiors so I looked in the gasblock real closely with a flashlight. I could only see 2 ports no matter how hard i looked. I found the 3rd port hiding right near the hole in the gas block. Its not visual by eye but i found it with the paper clip. Once you take off the gas plug you will see....just make sure the puck is out of the way.
  16. Thanks all, i figured after all the research i did that i was compliant. Just want to make sure.
  17. I guess I will find out. My new RandR targets tactical gun has some issues with cheap low brass birdshot. About 15% FTE. 4 ports are clear as can be. I ordered the ka puck as well as MD V plug and reduced pwr recoil spring. The OEM puck doesnt seem as nice(machining) as the OEM puck in my stock Arsenal s-12 which runs 99% on the crappy stuff.
  18. I thought the KA puck was supposed to help with birdshot on guns that had issues.
  19. BullF-16

    922 question

    I posted this in the 922 section but not a whole lot of activity there, and i have researched quite a bit. I just want to make sure I'm not a Felon! Im 99% sure my stock Arsenal s12 from K-var is good to go. I just want to make sure. I have the K-var SGL12-02 with the Arsenal inc hand guard and threaded bbl. To use the high cap mags I should already be good to go, mag = 3 parts and arsenal hand guard = 1, this brings the 14 parts down to 10 correct. I also have a us made choke threaded on the bbl. So in essence it only has 9 foreign parts Am I compliant and how bout th
  20. Im 99% sure my stock Arsenal s12 from K-var is good to go. I just want to make sure. I have the K-var SGL12-02 with the Arsenal inc hand guard and threaded bbl. To use the high cap mags I should already be good to go, mag = 3 parts and arsenal hand guard = 1, this brings the 14 parts down to 10 correct. I also have a us made choke threaded on the bbl. So in essence it only has 9 foreign parts Am I legal.....I dont want to be a felon!
  21. Having some low brass FTE issues with my new RandR targets tactical gun. Have 150 rounds thru it now and still having about 2-3 FTEs per 12 rnd mag with cheap low brass on setting 2. Ports are not the problem. I ordered a KA puck and V-plug. Also a reduced recoil spring just in case. Works fine on hi brass 00 buck setting 1 stock plug. I have done a search and cant find anything relating to Vplug with KA puck. Lots of info about gunfixer plug and KA puck. I went with a V-plug because it works nicely in my stock arsenal s12. I'm thinking the KA puck alone should solve my proble
  22. Well, took out my RandR targets tactical gun sat and sun. Works great on high brass. Not so great on the cheap federal remington or winchester. Had about 15% FTE with all low brass on setting 2. Have 150 rounds thru it now. I ordered a KA puck, MD V-plug and if those dont make it 100% reliable i also ordered a reduced power recoil spring. Think this should iron out the kinks. It has 4 ports and all are clear so thats not the problem
  23. Is this the ARFCOM General Discussion forum????
×
×
  • Create New...