-
Content Count
546 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Store
Everything posted by yooper14.5
-
Heres a post I made a long time ago: http://forum.saiga-12.com/index.php?/topic/64673-recoil-reduction-options/?hl=%2Brecoil+%2Breduction+%2Bguide The Enidine works great, i run it on mine.
-
well this sucks. hopefully this doesn't stunt the aftermarket support for saigas. veprs should be unaffected, except for demand jumping through the roof.
-
Use the css videos. theyre thorough.
-
Saiga 12 will not cycle low brass (but it used to)
yooper14.5 replied to Turbo.M777's topic in Saiga-12
Those pictures are way better, and show exactly the kind of thing I was thinking of, although I'm suprised the bolt lug doesn't show any damage. That dent was created by the lug slamming into it when it unlocked. If you felt confident enough, I think you could dremel the corners of the dent out very carefully, so that the dent is gone, and the channel is smooth again. You might want to send it to somone who has more experience with the system, because if to much material is removed the carrier will rotate the bolt to far and that could cause interference with the rails. But it would be better -
Saiga 12 will not cycle low brass (but it used to)
yooper14.5 replied to Turbo.M777's topic in Saiga-12
ok, you pointed out what looked like wear or damage in the front of the lug channel. that spot that you circled is the spot that prevents the bolt from exiting the carrier when it is unlocking. if the gun were extremely overgassed (5 magnum slugs at full gas) it may have slammed the tip of the lug, which my picture shows circled in green, into that point of the channel hard enough to cause that damage. if it did, there should also be some corresponding damage to the tip of the lug. if there is, it will be creating a lot of extra friction when the bolt is unlocking, as these are the unlocking f -
Need a front pistol grip that won't break for my Saiga 12....
yooper14.5 replied to Rolex John's topic in Saiga-12
i have a magpul moe. works great. -
Saiga 12 will not cycle low brass (but it used to)
yooper14.5 replied to Turbo.M777's topic in Saiga-12
could you post pictures of the bolt and carrier? a complete picture of the carrier, and a picture of the bolt lug channel would be the most relevent, along with a picture of the bolt lug itself. also, maybe a picture of the inside of the gas block, for the hell of it. -
Halo 4
yooper14.5 replied to MightyLordRay's topic in General Discussion - Any topic is welcome here!!!
I play black ops and mw3, and intend to get warfighter. I've got a ps3. Gamertag: rambi ghandi2 -
Happy Birthday Cobra!
yooper14.5 replied to corbin's topic in General Discussion - Any topic is welcome here!!!
Double post, sorry. -
Happy Birthday Cobra!
yooper14.5 replied to corbin's topic in General Discussion - Any topic is welcome here!!!
Happy birthday shannon, good luck finding that yugo ak. -
Steel, sheet metal and cnc construction, 16 or 18 gauge corrugated bodys, cnc the top portion of the mag to form the tabs. Spot weld it all together. Or just go all sheet metal. preferred capacity 5,8,10.
-
I'll pass on the conversion, but I was practicing stick welding w/7018 AC rods while simultaneously watching the nieghbors fireworks. I also went out to dinner and attended a parade.
-
Id do some research on trigger actuators for this one. Atkins accelerator got banned for a spring, slide fires legal without one. The accelerator pulled the trigger each time it fired , it wasn't full auto, but got banned as a trigger actuator anyways. so it can be semi and still be banned.
-
The tromix setup is the better setup. Its less likely to break. When you can, toss us some pics of the firing pin channel. The tromix pin is larger, and more likely to be affected by obstructions. You need to make sure the channel is clear. if it breaks with the right springs then theres somthing else wrong. As far as birdshot goes, you could try a more efficient puck. If that fails, drill your ports and you'll be good to go.
-
Believe me, you want to do it right and make the gun run with the factory recoil spring. Its worth it to never have to bother with it or worry about it again. id switch back to the factory mainspring as well, its more reliable in every way possible. Also, I dont believe the shop for a second that they used the right spring. How hard is it to push the firing pin in with your finger? The tromix spring should make your finger hurt.
-
don't you mean light strikes?? Also, to the OP, you said they modified the gas block and ports. How did they modify the block and what size are the ports? and you need to get a new pin and use the included spring. dont take it back to that shop. The reason it can cause it to break is most will not use the supplied stronger firing pin spring that came with the Tromix firing pin to get it to work with the JTE main spring. Ok, thanks for clarifying.
-
don't you mean light strikes?? Also, to the OP, you said they modified the gas block and ports. How did they modify the block and what size are the ports? and you need to get a new pin and use the included spring. dont take it back to that shop.
-
I Declare War!
yooper14.5 replied to Yoshi's topic in General Discussion - Any topic is welcome here!!!
I'll kill anything In a ground nest in my yard or trails, and anything that makes a nest on my house except mud daubers. Mud daubers are docile, only stinging if handled. They don't even defend their nests. They also feed exclusively on spiders. I will never kill one of the iridescent blue ones; they feed exclusively on black widows. The black ones and black and yellow ones eat normal spiders. -
More on Michigan Pistol Registration
yooper14.5 replied to pyzik's topic in General Discussion - Any topic is welcome here!!!
I looked online, its kate segal, thanks for looking. -
More on Michigan Pistol Registration
yooper14.5 replied to pyzik's topic in General Discussion - Any topic is welcome here!!!
Tim walberg. Let me know, thanks. -
Its the things like this that keep me proud of being an American. Our government is corrupt, our economy is tanking, but still nowhere else in the world will you find people with the compassion, strength, and heart of the people here. it is the people of this country that make it the best place to live. RIP Cody and Amanda.
-
If your worried about her ability to control the weapon, I would consider an S-20 or S-.410 in addition to the other options that have been presented. They also carry more rounds.
-
I also recommend the enidine, it is amazing, especially with slugs. Here is a good thread on it: http://forum.saiga-12.com/index.php?/topic/68157-q-for-those-that-have-the-enidine-shot-shock/
-
What trigger do you use? If a red star arms trigger is tuned wrong, the hammer can miss the sear during reset and end up on the firing pin, but not fire the round, giving you a live round in the chamber with the hammer on the pin. I learned from experience. A soon as I tuned the disconnecter it stopped. The problem only happened when firing rapidly.