Jump to content

saiga545

Contributor
  • Content Count

    274
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by saiga545

  1. Hasn't happened on my vepr mags, but it did happen to my Saiga mag one time! I don't think it can happen once inside the gun as its supported by the magwell on the sides.
  2. Russiansurplus.net still has the Molot railed lower handguard. That's what I'm running now. I had the Chaos setup, but got rid of it because the set screws on the bottom really mar the bbl when firing. It's a really nice rail otherwise, light weight, and a better option of attaching an optic than the plastic top cover rail. It just needs a better way of securing to the shotgun. A bbl clamp like on the MI Ak rail would be way better.
  3. Yes you could have a design similar to the surefire 100rd ar mag where it's wide on the bottom and narrows in the magwell area.
  4. I bet Jack Travers could make a copy priced at $100. I'd go for that. His saiga 12 mag well (also $100) was great.
  5. Has anyone swapped their polymer mag well for the metal one as seen here: http://www.russiansurplus.net/product_p/vepr-magwell-b.htm If so, is it worth it? And any issues with installing and mag fitting? I'm thinking about picking one up since more came in stock.
  6. Is this available to purchase by itself or can it only be bought with the forend?
  7. I've got about 10. Only need 40 more. They work outstanding in my S223 and Golani (and to think I almost sold that one). Wished they fit in my SLR106 too - then it would be a perfect world
  8. I just hope they'll be available before the fucking ban goes into effect. That cocksucker Biden!!!!!
  9. How is the front nut retained? Did you use an o-ring?
  10. Looks like we've seen the last of them. Css is out of stock (along with the rest of the hi caps). And a new AWB will be installed as soon as the new Congress is seated. I only hope what we have now is grandfathered like the last one.
  11. Just make sure the grinding tip doesn't hit the primer. That happened to me once and the gf wasn't too happy about the big hole I put in the wall
  12. Unfortunately, you can't thread the S223 bbl to 1/2 x 28 unless you trim the bbl down. I went with a 14x1 LH and a Dinzag extra deep threaded phantom FH.
  13. saiga545

    SGL31

    Sounds to me like you're trying to rationalize buying a TWS dogleg rail . But very nice setup! Is that a Kobra sight? I love my SGL31 too and am thinking about mounting one of those on mine.
  14. This happened to me too. Grind the screw head around the edges to make it more narrow and it should seat all the way.
  15. Good job! What break are you going with?
  16. Wow $15 is a great deal! It looks like a Century Trigger group. I wonder if they fixed the trigger slap issue. If not, it is an easy fix. You just remove the back wing on the disconnector and grind a little material off the bottom where the spring goes in. I've fixed a couple myself. If it has that nub on the front of the hammer like the G2 one, then it will need to be ground down. I was looking at their site and they got some neat stuff! And yeah a plain poly AK stock with Bulgy recoil pad works great and it gives it that sexy comm bloc look.
  17. You're welcome! Best of luck and hope it goes smoothe!
  18. I like the Mojo micro click peep sight. Brownells carries them. I've got one on my Saiga 308 and SGL 21. Combine that with a KNS fiberoptic front post, and it's the next best thing to having a red dot! Adds a lot of accuracy!
  19. Since you have a machine shop, you just need to grind the "nub" off the front of the hammer so that it will clear the cross member. You'll also need to grind the right lug if you want to use the bolt hold open. The thickness of the bolt hold open at the hammer pin is going to be how much material you need to grind off the hammer lug. Here is a link on CSS: http://store.carolinashooterssupply.com/servlet/-strse-TRIGGERS-dsh-TRIGGERS-GUARDS/Categories Or you can spend an extra $15 and get the modified G2 FCG from CSS to save some time. But it's always more fun to DIY
  20. Three rails? You mean a top rail, bottom rail, and side rail right? Yes. I covered them all with Tapco panel rail covers. I Think I'm going to remove the right side rail to reduce the weight some.
  21. Almost $700 in my area now. You can get a VEPR 308 for that!!!
  22. Well, as long as you have a 20 ton shop press, it shouldn't be too hard. You press out the bbl pin, then you press the bbl off using a bbl press jig like the one here: http://ak-builder.com/index.php?dispatch=pages.view&page_id=11. God if I had access to a machine shop - I would be like Charlie Bucket in Willy Wonka!
  23. The only difference between the Tromix and the factory is that the Tromix has a "T" engraved on it. Yep, just for compliance.
×
×
  • Create New...