Jump to content

skullface405420

Member
  • Content Count

    221
  • Joined

  • Last visited

Everything posted by skullface405420

  1. ehhh because , well. if it didnt matter if it was usa marked or not i already have a bunch of surplus trigger groups i could just drop in.....its just a big deal to me. id rather my gun for sure be legal. in the future when laws change id rather not have to deal with obv more bullshit than i have to because i never plan on getting rid of my saiga. im just wondering what exactly has to be modified on a stock g2 trigger group to make it fit a saiga 12. i cant remember exactly.
  2. yeah i should know this by now im on like my tenth conversion.. where can i get the cheapest/best USA MADE trigger group thats for a saiga 12. single hook. if i have to modify it what exactly needs to be done. i cant remember what i had to do. my fear is that i get a tapco g2 and the area that needs to be profiled to fit will be exactly where it says USA made. i think that happened before on one of my conversions and id rather try to avoid grinding off the one reason im even doing this to begin with. compliance parts. so really im just trying to get a trigger that works that is clearl
  3. okay, i wont get into it. but i FUBAR'd seriously trashed my saiga 12s safety lever. id like to get a new one. one with an extra tab and a notch cut out. apparently i cant mod or fabricate one on my own worth anything at all. so,. my saiga 12 has no safety, what safety levers would work? any AKM? like a wasr-10s saftey? i just dont see what the difference is. can someone enlighten me the differences. because i dont want to buy a ak rifle safety and it not work.
  4. im back after all this time. sucks none of my friends from here are ever online anymore.

  5. I live local to you. I will buy one drum mag for 60$ if you can meet. I seen you selling these on armslist. If there still available. PM sent.
  6. I noticed the online store said you were sold out of the USA made copys. I'd like to get one if you ever have any again.
  7. Well I actually have not had the opportunity to test it again I got the right screws and I also polished the rails and fcg and bolt and bolt carrier I loctited the heck out of the rail hopefully that won't be a problem if I have to enlarge the gas ports but you guys did your part. Excellent customer service. I'm just confused why when I put the rail on it jammed on low brass when it never did it nowhere near as bad with the stock handguard. But I've done alot of work to it and I think I'm going to wait till I get a muzzle break and a new adjustable gas plug probley go with the MD arms vplu
  8. What if the gun cycles high brass like candy but cheap wally world bulk pack stuff jams and doesn't cycle? Would this thing help? I was going to get an mdarms vplug bc I know it has more settings but every where is sold out. One of the vplug settings I know for a fact will let more gas in than what the factory plug does on setting 2 right now and that may just be what I need...
  9. i was going to order a vplug from you guys a few days ago and never got around to it. i went online and noticed you guys were sold out. everywhere is sold out. are you guys going to have any made again ? id like to purchase one rather than an autoplug.
  10. Well I got the rail and I properly installed it this time as best I could I tightened the heck out of the screws and used a liberal amount of blue threadlocker loctite. I may need to get a new rear locking plate from chaos bc I may have goofed mine. Idk it seems sturdy as a rock now so I doubt it will fall apart at the range again like it did when I was using my own screws and not there's because I was impatient lol. My worry is something weird might be going on with the rail attached. Maybe it's pinching the gas tube or something I don't know. I haven't got to shoot it enough and probley
  11. Well, I'd dang sure hate to send my only working bolt to anybody but maybe there would be a way to take a measurement with some kind of headspace gauge and someone could custom make each bolthead to customer specs. I wonder if they do anything like that with other aks. I could probley see people buy one if it was that simple just to have a spare if price was right.
  12. I'll start keeping the nub faceing out, I also got some Teflon plumbers tape for the gas tubes threaded gas plug. See if this makes any difference.. Just wanted to say thanks guys
  13. Man that's confusing. If it's faceing the piston than its backwards. If it's faceing the muzzle than its faceing forward. Which is it
  14. Someone else had mentioned it in a thread, I couldn't find it. Yeah there's a search button but... Which way does the little nub on the gas puck "piston" supposed to face in the gas tube? Towards the actual op rod piston and the stock rear end of the gun or faceing the muzzle of the gun outword where you would be aiming at to shoot? It probley doesn't make much difference but I'm going for making my gun 100% reliable here....
  15. You guys are talking about the adjustable gas plug with the detent right? I never thought about unscrewing it and wrapping it in Teflon tape... I may just have to see if that helps mine any..
  16. Mine is the same. I just want to smooth as much friction in this action as possible.
  17. Anyone else's saiga 12 bolt stick when almost fully home like this? I just polished my entire bolt carrier and was wondering if it is supposed to be that tight when fully home or if I can slick it up debur something or polish it to make it get that last rotation in. I just can't seem to find what makes it hangup when almost fully closed.
  18. Confirmed with dental pick its 4 ports. I had a Allen key and never could really get any satisfying angle with it. The plastic pic was able to get it. It just wasn't cycleing birdshot at all with this new rail I put on it yesterday, but even before then on gas setting 2 every 3rd-4th shot it would jam sometimes. I also put in a tapco stainless steel gas puck(piston) so I'm wondering if that had anything to do with it. I just want it to be as reliable as possible with all ammo even if I need to get something better than the stock plug for easier convienance of turning the settings. I was t
  19. I'm thinking of removing the gas block for the first time and fixing this. You guys see anything wrong? I'm not sure if it's a 4port or not definitely a 3 port and one of them seem slighlty obstructed. On top of the fact I think the side ejection gas vent on the gasblock should not be like that. The holes are not lined up in unison clearly on the side vent. Is that something that should be repaired? What should it normally look like?
  20. I just got this thing and I'm so excited to get it up and working. I'm having some issues with it and chaos isn't around so hopefully I can get all the stuff worked out cause this thing wasn't cheap. @300$ I could have got a Mossberg 500 for that much ya know. I understand it's holiday season and there not around and this rail seems really nice I'll be disappointed if it doesn't work right for whatever reason.. The biggest thing was it seemed like I was having a whole hell of alot of trouble fitting the hinged dust cover thing over the preexisting dust cover and latching down over the rec
  21. I just want to say when I finally got the rear tab profiled correctly the magazine works perfect. It's very high quality and I will definitely be buying at least another if not two more of these magazines. I recommend them to anybody with a saiga shotgun.
  22. Well I ended up getting the rail in the mail with no email notifications or shipping tracking info I didn't think it had actually shipped since you guys were out of office till Monday and I didn't get the screw hardware with it that was supposed to come, I did my best at a hardware store and matched the screw thread pitch to 6-32 but it seems like its really special screws so I'm going to wait because the bottom handguard original screw that screws into the gasblock didn't work out so well like it wasnt long enough with the rail on after 1-2 slug rounds it fell out and I lost it. I also n
  23. I think it will be interesting if it is able to fully break down with an upper and lower like an ar-15 or fn fal type weapon or similar and accept different calibur uppers like the origin 12 saiga / vepr inspired ak hybrid shotgun. At least, alliance armament? (I hope there origin shotgun is better than there drum mags they sold for the saiga) is planning on producing a different calibur bolt and carrier as well as magwell and bbl upper for the origin 12 ak bastard child...
×
×
  • Create New...