Salt1219

Just so you guys know the doors to the lavatories and crew sleeping area and flight deck all have a hidden way to unlock them without a key. We use them daily while building the interiors (except the flight deck door its not installed in my position)

I know a guy in woodenville area if you still need a smith

I think that concept has merit, but getting the 2 pieces lined up correctly and tightly with that type of fastener would be challenging. The plastic is most likely not as forgiving as wood. I did just have another thought based on sort of the same idea. He could fill the stocks (with JB Weld, fiberglass resin, whatever) at their ends thick enough to accept a counter bore (if they're not solid already), run a thread rod between the 2 parts, install a nut in the counter bore, line everything up, torque the exterior nuts, trim the rod off, fill the counter bores and use whatever filler to smo

I work for Boeing and specifically on the 777 line, we build -200's, -300's, and freighters. This whole story has been a on going debate at work. I hope whatever caused the plane to come up missing wasn't structural, if it was the black box should still be transmitting.

Good idea ;-)

When you use acetone do you lightly paint it on and let it sit for like an hour to soften up? The company website says the plastic they use is chemical resistant... Then again some of the keytone I use at work is very strong we call it mpk (I work for bieing)

Thank you. I think you sold me on the idea of trying out jb weld. I was planning on whatever I used to bond the pieces being just a secondary method of attachment. The first will be bolting them together, using the two together should make a really strong bond. Im not too worried about the hack job look, in that im confident in my ability to make it look nice, I just didn't want to attach it in a ugly way is what I meant. *edit I contacted atigunstocks and asked them what I can used to bond to them. I'm currious what they will recommend.

I've never used jb weld before and just assumed it was for metal. I might have to test that out I have a spare piece of stock that should be the same material. I just dont want to hack up a good stock and find out what I did wont work. I aslo don't want to make my work look like a total hack job

I have been wanting to chop down a ati Monte Carlo stock and attach a Mossberg one to the back. Im worried there isn't enough meat for one bolt to hold it all together So do you guys think pvc glue would bond them? Or if you know of another product that would work, what is it?

Well while I was in Cambodia I picked this up * damn it to large to load... Snake wine

they are unlikely to actually read the bill anyway

I did give some thought to adding a sling. I'm holding off till it actually operates correctly. If you have more ideas I would love to hear them

I just started a bullpup project because I couldn't make a sbr. I really hope this passes.

It does give off a sifi vibe, and it certainly isn't for everyone. I think if you held it you would feel the ergonomics difference and at least appreciate that aspect of it. that's for my shotty lol. i do still want to do something like a afg, it kind of needs it.