-
Content Count
23 -
Joined
-
Last visited
Community Reputation
6 NeutralAbout Koi910
-
Rank
Member
Profile Information
-
Gender
Male
-
Location
Jacksonville, NC
-
got the tube from midway for free lol they misled me on the description but it works great. its a Mako 8 position stock tube i like it because i didn't remove the rear tang and with stock pushed all the way in it covers the rear tang. I am still hesitant to remove the tang so that tube solved my worries
-
-
Updated my saiga 7.62 just installed new stock, grip, buffer tube. Mako AK pistol grip synthetic - Midwayusa Mako 8 position ar stock buffer tube - Midwayusa Magpul Moe Black commercial stock - local tactical shop
-
-
Upon receiving my bulgarian ak 47 wood it was in bad shape with cracks, different color stain, and scratches. I decided to try and clean it up. Here it is initially as i received it. I then went to lowes bought some Acetone, 320 & 220 fine sandpaper, 0000 Steel Wool to remove the original varnish. I filled a little acetone in a glass pyrex pan with the wood and used the steel wool to wash the varnish off it came off almost instantly and left the pan filthy. After the acetone it looked much better i probably could have stained it now Since the stock and lower hand guard we
- 1 reply
-
- 1
-
just the stock 132 I've got the info on parts i used in my profile gallery. In the picture description
-
-
Finally grew some ballz and decided to convert my saiga 7.62. I absolutely have no gunsmithing skills, no tools, no garage to do the job. I picked up all of the tools at walmart and the kit from CSS. I say that it was fairly easy but drilling out the trigger guard plate was no easy task those rivets and welds were extremely hard to get through a 3/16 drill bit did nothing i used a slightly larger masonry bit. Anyway take a look. ThankS to every1 on the forums for the Do It Yourself Attitude answering any questions i had u guys gave me the courage to go thru with it.
-
Ive seen on several post regarding the AK-47/SAIGA LOWER HANDGUARD RETAINER The retainer does require fitting to use on your rife. Many people have used this on their conversions and filed the barrel of their rifle in order to make this fit. I however did not want to file a niche into the barrel of my rifle in order to put on a 23$ piece so I Used my dremel to file the center of the 8-32 thread steel cap screw well not the actual screw i purchased a similar screw at the home depot for 98 cent for 2. Then painted it with the rifle scratch pen heres before... and after.... the black
-
Hey any1 in the Jacksonville/Wilmington area wanna help with my conversion on my saiga 7.62 Im new to the forums still sketchy about doing my conversion on my own any pointers would be helpful. thank you all and i will pay for your time
-
Ive recently purchased my Saiga 7.62 Ishmash Rifle and have been on the market for a hand guard. The Hand guard i like is a Model MI-AKS : 2-MWMIAKS made by Midwest its also on the Arsenal Tactical AK rifle. on this link: http://www.cheaperth...2MWMIAKS-1.html It also says in the description: For use with rifles that do not have the forward hand guard cap. Would this apply to my rifle which is a Saiga Ishmash 7.62 which is shown in this picture Anyone with information on this would be helpful?? can i put this on my rifle and has anyone else with this siaga put on a simila