Jump to content

Turbo.M777

Contributor
  • Content Count

    124
  • Joined

  • Last visited

Everything posted by Turbo.M777

  1. So here's what I drilled out. When shooting, it seemed that it did allow my S12 to cycle significantly better. I'm still getting around one FTE about every 10 shots now. Better than every other shot though. Ugh. Wheres John Browning when you need him? I want this thing to go at least 5000 rounds without a failure! Is that so much to ask?
  2. I went ahead and drilled a hole through my top rail where the vent is. I'll take it out shooting tomorrow and see if that fixes the problem. I'll post results.
  3. I have been having FTEs like crazy with my chaos extended rail. Like at least every other shot even with slugs and other high brass. I tried many different parts (gas plug, puck, spring, etc.) and even had my ports drilled out by a reputable Saiga gunsmith in my area. I tried reverting back to factory parts (with the quad rail still on) Nothing fixed my FTEs until I tried taking off my Chaos extended rail! With it off, everything suddenly cycled like a dream including the cheap walmart bulk ammo. Would drilling a hole in the side of the quadrail so gas overflow port has more space make a diffe
  4. All the lee data says to star crimp so thats what I've always done. Why are you roll crimping? At least with star crimping, I've been using winchester WAA12 wads for a couple of the lee recipes. I just bought some 12s3 wads to try a couple other recipes but haven't loaded them yet.
  5. That looks badass!! I like how your eotech hood matches too. I noticed your stock on there as the fab defense one. I almost bought one for my Saiga. I didn't because a reputable s12 builder in my area said since its designed to absorb some of the recoil, it would cause cycling issues in an S12 so I got a tromix stock instead. Have you had any issues with yours cycling? BTW I cerakoted my saiga, and It doesn't seem to be any better than duracoat as far as durability goes. It still scratches and wears off. Its not the miracle innovation its made out to be. If you're having scratching or
  6. That looks badass!! I like how your eotech hood matches too. I noticed your stock on there as the fab defense one. I almost bought one for my Saiga. I didn't because a reputable s12 builder in my area said since its designed to absorb some of the recoil, it would cause cycling issues in an S12 so I got a tromix stock instead. Have you had any issues with yours cycling? BTW I cerakoted my saiga, and It doesn't seem to be any better than duracoat as far as durability goes. It still scratches and wears off. Its not the miracle innovation its made out to be.
  7. Where'd you find a bolt? Stripped from a dead Saiga 12? I know R&R targets sells carriers
  8. What the fuck is wrong with people?! Why? I hope no one was fatally injured... I guess we'll see.
  9. Dumb. I find it hard to believe that a spare parts market isn't big enough to make any money from. There's a lot of saiga owners out there. Far more than visit this forum.
  10. Looks like a lot of effort. Cool concept, but not something I would ever want to do. I don't see how it would save much time after considering the time to operate the latches. Pushing the shells in isnt too bothersome for me. Its cool to see other people experimenting though On second thought, I can see how it could save a chunk of time. Still wouldn't do it though
  11. That's awesome. I'd want to go if it didn't cook me.
  12. Bullshit. I just had some waa12 wads for sale and ebay took it down. WTF. In their message they asked me to REPORT anyone selling similar items! Seriously? They do something to piss me off and ask me to do them a favor and fuck over anyone else selling them. I don't think so. There's a ton of other listings for wads too. I have several pics of my gats on facebook and haven't had any issues.
  13. Son of a fuck. I have the claybuster waa12 wads. Wish I would of seen this before I bought em online. Its good to have this info now though! Thanks for sharing that. I'll have to find some more fitting wads in the future. But as far as what I have, Are these shells with that buckling still okay to shoot? From your picture, are you saying to put the nitro card in the shot cup, under the slug? (I am also still wondering if 1 oz slugs not being 1 oz are okay)
  14. They are cast from lead ingots I got on ebay advertised as pure lead. Whether they are 100% pure, I suppose I can't know for sure. I started loading some hulls and encountered another question; After pushing in the wad and slug, I will only get a good crimp when I finish if I have pushed the wad/slug down far enough that the ribs on the wad begin to buckle. Is this okay, or should they be perfectly straight? Here's a pic of one I cut open after I finished it.
  15. I just cast about 100 lee 1 oz (437.5 grain) slugs. Most are coming out at around 418 grains. (My scale is accurate). Where do you draw the line to recast or use it? I would assume its not nearly as critical as a rifle bullet is, but I'm new to shotshell reloading.
  16. <blockquote class='ipsBlockquote'data-author="Risky" data-cid="877657" data-time="1363636964"><p> You guys seriously need to lighten up and stop imagining that something like this is somehow going to be<em class='bbc'> 'used against us'</em>. Why do some of you act like owning the Saiga 12 is some how indefensible? And this <em class='bbc'>'OMG, don't let the ANTI's see what we've got!'</em> attitude is pathetic. It's your fucking right to own it. Plain and simple. If you're afraid to stand up for that right, what's the point of having it? That's the
  17. Velcro box? What the shit are you talking about? The limbsaver buttpad? Yep, nothing gets by you, the limbsaver. On a side note, what the shit is that terrible looking square on the rear of the receiver? No offense to the guys who have these guns. Ahhh that. Its where the name of the US importer (Knox I think?) was etched off when the ATF stopped importation of S-12s before. Its just rough metal. Not velcro.
  18. Hell yeah! I figured Utah would be somewhere near the top. #4 is pretty good! Thanks for sharing. I didn't know vermont was such a gun friendly state.
  19. Velcro box? What the shit are you talking about? The limbsaver buttpad?
  20. If only Izhmash made a double barreled Saiga, then they'd stay for sure
  21. I actually helped a friend of mine make this. I thought the idea was hilarious! I think its extremely obvious he's not serious, and is mocking the know it alls that don't know a damn thing!
  22. What do you make of this? https://www.youtube.com/watch?feature=player_embedded&v=FmVbh1mjZ4s
  23. Chaos rails are designed to accommodate their HK sights. I bought my extended rail with them. I think it's just an Allen screw. I used those as backup, and have a Burris Fastfire III red dot which Im quite happy with.
  24. Who sales bolts and bolt carriers? I've bought most of my stuff from CSS and I haven't seen them on their site.
×
×
  • Create New...