jrance@iacwds.com

1. NFA Item: PAP M92PV SBR 2. Form Type: Form 4 3. Transferee Type: Trust 4. Form 4 Sent: 01/15/13 5. Delivered: 6. Check Cashed: 01/23/13 7. Pending Date: 02/26/13 8. Approved Date: 9. Form 4 Received: 10. Picked up from Dealer: 11. Examiner Name: 1. NFA Item: Kestrel 5.56 Suppressor 2. Form Type: Form 4 3. Transferee Type: Trust 4. Form 4 Sent: 02/06/13 5. Delivered: 6. Check Cashed: 02/14/13 7. Pending Date: 03/22/13 8. Approved Date: 9. Form 4 Received: 10. Picked up from Dealer: 11. Examiner Name: 1. NFA Item: Kestrel 7.62AK Suppresor 2. Form Type: Form 4 3. Transferee Type: Trust

The SLR-101 has a stamped receiver and the SAM7R-61 has a milled receiver.

Anything is possible but I don't know for sure. You would have to fabricate something for the latch to hold to on the stock.

SBR Mockup.jpg Here is my pathetic attempt at using paint. http://forum.saiga-12.com/index.php?/topic/53657-how-bout-those-hot-rodded-dracos/page-6?hl See Post #164

http://counterstrikefox.freeservers.com/mv.htm

Post#164 for folding wood http://forum.saiga-12.com/index.php?/topic/53657-how-bout-those-hot-rodded-dracos/page-6?hl= rodded draco Gamaz, thank you for the kind words. Yes, it is a Ronin, Trying different grips to see which flows best with the design. Sport Rescue, yes that is the 4 pc Boost by CNCWarrior http://www.cncwarrior.com/ProductDetails.asp?ProductCode=23959

How barrrel length effects 5.56x45 muzzle velocity http://counterstrikefox.freeservers.com/mv.htm

Here's the mock up of my PAP. I'm with you and really like the wood stock as well. Guess I might have to buy another for the opposite reason you would. LOL I think that fixed wood stock looks great. I will be adding a StormWerkz M92 picatinney for a red dot.

See post #2 using Wolf regular ammo. Did you somehow miss that?

An excellent compromise between high end and low end Red Dots is the Vortec SPARQ at $200. Look around (Military Arms Channel Review) and you can get 10% off. I have 3 EoTechs and a couple of Vortec SPARQ's. Very nice and sturdy for the money. Invest in aftermarket flip covers as the bikini covers are crap.

For those considering putting a suppressor on an AK I will share what TROSUSA told me regarding barrel/thread concentricity. Quote "The problem is that the threads on the sight tower will never be concentric with the bore. The only safe way to use a can on those guns, in my opinion, would be to thread the barrels directly with the appropriate thread." So it would seem that the adapters are just asking for a baffle strike. Worth what it cost you but these guys do a lot of this sort of work. 1911

They charge your c.c. immediately.

Done. Tennessee is the volunteer state, helped us out at the Alamo; maybe they will come to Colorado's aid as well. Good luck. 1911

Engle Ballistic Research has the below. It is the AK-47 answer to the .300 Blackout round. Expensive but very sweet with a suppressor. If anybody finds the loading data on this let me know. 7.62 x 39 Jackhammer Subsonic This round is designed to feed and function M16/M4 weapons in this caliber in both semi- and full auto. It utilizes a 220-gr. projectile. Also works in Kalashnikov weapons with slight ramping. Cycles both weapons with or without a suppressor. Independent testing has given sub-1/2 MOA accuracy at 100 yards using aimed semiautomatic fire. Light recoil and enhanced controlla

I am truly embarrassed. #15

Great find.

Definately get the second mortgage and BUY it! Then get a loan against your cars to buy plenty of ammo. Can you imagine the cost of an afternoon of fun with that? I go to shoot a F/A AK-74 the other day and it was great. I'm sure you will enjoy it Chile.

I went over to the gunsmith that is building my M92PV SBR and he had a novel idea. He is going to pull the barrel and cut the flash hider threads (26x1.5) back to about 4 - 5 threads to allow the 4 pc flash hider to be installed. He will then thread the barrel for .5" with 14x1 so that the Kestrel 7.62AK can be installed. He will make a thread protector for the barrel that will fit under the flash hider when the suppressor is not in use. He has an extra M92PV to try it on to be sure it works before doing mine. That just leaves the SGL-107FR to do the same thing on. Then no worries about adapte

I got it and applied the paste to one of my AK's and a couple of 1911's. I like the idea that it stays dry until the guns warms up and then self lubricates and the carbon wipes off easily. The dry part is especially great on a carry gun as it doesn't collect lint and junk like the oil does. 1911

If you are watching and believing the media you need to take a few minutes and read this and see the video. Quite simply you are misinformed about all events current. Policy of papers, TV and Radio is not to report the news but instead is to push a reality this is not reality but is what they want you to believe. http://www.conservativenewsandviews.com/2013/03/06/accountability/news-media/bullies-in-the-newsroom/

fatty alcohol is also a stand up guy. Feel very good about dealing with him. Thanks to you as well.

Well poop evlblkwpnz! It says "THis video is private"

http://www.youtube.com/watch?feature=player_embedded&v=uQoQO0rEeX0

Does anyone know if the gas tube is ported on the PAP M92PV and the Draco-C? I have a can coming and it is my understanding that if they are not ported it will lead to an overgassed situation. If not, I'd like to get that rectified before the cans come about 6 months from now. Thanks in advance for any assistance. 1911