docfu

I can't, I simply can't. every time I go to unscrew it the backmount turns as well, I've tried holding it with a pair of pliers and glueing for added strength and I just cannot get the front swivel thing off the foregrip. Is that puppy flatened in there or something? I'm trying to get it off so I can mount a normal swivel and then a bipod. -docfu

I've heard through local vines that people have gotten the AK mags to work only by filing down the rear so it fits. Maybe some slight problems with feeding..but since the mag would still work in an AK as well as a Saiga...(given you'd have to hold it up). It's definately a gray area. -docfu

No kidding, now we got it settled and the only question left open is modifying high capacity AK mags to fit into a Saiga. If the mag is pre-ban it could be considered a 'reconditioning' of sorts. I've seen the AK mags and if I were to do it what I would do is the following steps: A. Remove the spring mechanism from the mag. B. Use a wire brush(on a drill) to clean up and scrub the area to the front of the mag where you need the 1/8th inch buildup. C. Build up a layer of solder on the front of the mag. D. Use a piece of brass tubing(solid) about 1/2" long(measure it to be ex

I was wondering how often and how people here clean their gas tubes. After disassembling the gun I take the tube outside, run "carb and choke cleaner" through it, then run through a few cleaning patches, oil it and reassemble. I also run choke and carb through the barrel and then dust it out with high preassure air. -docfu

`( a semiautomatic rifle that has an ability to accept a detachable magazine and has at least 2 of-- `(i) a folding or telescoping stock; `(ii) a pistol grip that protrudes conspicuously beneath the action of the weapon; `(iii) a bayonet mount; `(iv) a flash suppressor or barrel having a threaded muzzle, and `(v) a grenade launcher; Since 1-5 are all negative where do high-cap mags fit in? if I change the pistol grip(by default) on an already imported gun then that would count as ONE strike(not two). That leaves the high-capacity mag, which isn't mentioned,

I've read through most of this board and I've yet to find the actual printing of the law that states: 1. What classifies an assault rifle - thus making it illegal. 2. Does a Saiga(specifically 7.62x39) fit this description? 3. If every gun is allowed '2 mistakes' is the stock Saiga using any? 4. If any gun modifications are made(hi-cap mag/pistol grip), they need a minimum of 5 US made parts to be used in the conversion. (I'd really like to see the law for this, on this board I've seen both 5 and 6 mentioned and it REALLY just sounds like a ploy to get people to buy more pa