Jump to content

shane_eld

Member
  • Content Count

    33
  • Joined

  • Last visited

Community Reputation

0 Neutral

About shane_eld

  • Rank
    Member
  1. Hey guys what do u think about this..i wanna put a real lower handgaurd retainer on so i hve to chnge the front sight block and gas block..wut do u think of this? http://www.shop.dezarms.com/product.sc?productId=29
  2. hey guys so im wondering where i can get an ak-47 parts kit that will be compatible with my saiga 7.62x39..i want it for the spare bolt carrier and bolt especially but all the other parts are good to have too..any imput is appriciated..
  3. i dont have a camera.. if u pretend this capitol "O" is wut u see when u look at the gas block strait on with the gas tube off the bottom of the gas block is worn more than the rest of the gas block like the piston is just barly bindin but not enough to efect the functionality of the gun and rubbing a wear spot where it makes contact.. the metal is a little thinner too..probobly normal
  4. hey guys..so i have this draco quad rail i modded to fit on my saiga 7.62x39..it bolts togeather with 4 allen screws and does not require an upper hand gaurd retainer..it is very nice and works well but i had to grind on it a bit to get it to fit right cuz it was binding up the gas piston..now when i take my gas tube off i can see the the lower half of the gas block has a little more wear on it than the top..like the metal is a lil bit thinner..is this normal? with the handgaurd bolted down tight i think it might be binding it just a little tiny bit..like not enough to matter cuz it cycles smoothly but enough to wear on the gas block a bit or the wear is normal.? Any help is much appriciated thanks.
  5. yes indeed..still havent shot it yet but im goin out tomarrow to test it out..were gona have a fireing squad executed on my old dryer..take that dryer thats wut u get for a busted heater core..
  6. i used a dremel with a thin cutting wheel then finished the wholes off with a 1/16th drill bit
  7. i vented my own gas tube check it out..will it work.
  8. well how many rounds have u shot with ur buffer in..i need to get at least 30000 rnds outta this rifle..
  9. i have a saiga 7.62x39 and i shoot bout 700 rnds per month.. the gun is overgassed so the carrier hits the trunnion everytime..i change the recoil spring to a wolff exra power spring and i still hits just not as bad..i have a black jack buffer and that helps a lot with the metal to metal contact.. what i wanna know is can the buffer cause more damage to the gun..like bend the rivits or something..? wut should i do? if i was rich i would just buy a bunch of 7.62x39's and change out parts whenever one breaks..but i am not..any opinions are welcome thankyou.
  10. yes definatly and u will save a grip of money
  11. case dings are caused by shell ejection hittin the dust cover..take a dremel and file 1/8 inch off of first ridge..
  12. agreed i wouldnt shoot without a black jack buffer..cheap insurence indeed
  13. shane_eld

    RECOIL

    You don't need the recoil buffer unless your gun is over-gassed. It won't reduce recoil, only prevent the bolt carrier from hitting the rear truncheon of your receiver if it's over gassed thus reducing wear and tear. A normal ak design doesn't make any (or at least very little) contact with the reciever. It shouldn't affect recoil or reliability in any case. Loctite should be enough to keep the screws in place. wrong wrong wrong indeed..EVERY god damn AK-47 slams its carrier into the rear trunnion..overgassed or not i think they all slam.
  14. ya i know i just dont wanna beat it to death..trust me i definatly shoot enough to put an experation date on any gun so i try and gear up to make it last
×
×
  • Create New...