sattv4u

I have owned a saiga 12 in the past and have done the mods. I think I will build this one for 3 gun ? Light and fast !!!

I just scored an Saiga 12 NIB from 08

If your S12 works perfect you will love it. JMHO?

I've drilled using #50 bit the first time, I have the block off for the 2nd time and I'm thinking about adding more gas. I picked up a .093 bit but haven't drilled yet.

Whats the largest you would drill the gas holes on a 4 holer running an autoplug?

Thank you

My bolt drops out like the test above, I have profiled the trigger group and bolt etc. I have replaced the front spring with a css spring..I think the problem is the hammer spring is to tight so I'm going to go with a jte hammer spring. When I shoot low brass some do not push the hammer back to refire so I have a loaded shel but no trigger...(and yes I have done the gas work)

can these be run both front and rear?

What is a good starting point for the autoplug adjustment (factory) I have made lots of changes to my gun so i can shoot low brass?

I noticed the same thing Shotgun ammo is all mixed up when it comes to gauge at walmart.

you will need to fix the gas holes and gas block, profile the trigger and carrier group and do spring and gas puck mods to shoot cheap ammo....Keep reading it's a fun and rewarding project.

I've thought about it ...adding more gas that way I can still shoot 3" ammo versus changing to a lighter spring and puck and beating the carrier to death...one more thing I've only cycled 100 rounds thru her so far so maybe I should keep shooting high brass till she is loose enough to eject the wally world NO BRASS Your not supposed to use 3" with the auto plug. 3" has too much gas for the plug to allow to by pass. yep I will stop doing that...shot 5 3" 00buck checking out my home protection loads ejected the shell case 12ft WOW !!!

I've thought about it ...adding more gas that way I can still shoot 3" ammo versus changing to a lighter spring and puck and beating the carrier to death...one more thing I've only cycled 100 rounds thru her so far so maybe I should keep shooting high brass till she is loose enough to eject the wally world NO BRASS

Sorry I forgot I'm running a 4 holer drilled to 050 and 11/32 oversized block

Are Tapco plugs junk? I am still having low brass issues after carrier and bolt profile? I'm thinking about a css spring and puck (I'm running a autoplug) The S-12 shoots hi brass all day long just want to be able to shoot cheap wally world ammo slide-fire. thanks for your input.