Jump to content

Angle King

Banned
  • Content Count

    31
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Angle King

  • Rank
    Member
  1. well just to report in on this..i shot 200 more rounds today..still no problems or differences in accuracy..
  2. its cool syn..n e ways shot 100 more rounds today without n e notice in accuracy or n e difference in the mark..will keep u posted though but i think im ok.
  3. ya i inspect it everytime i shoot and after when i clean..i wish i could understand what the metal is doing between the cut and the ring on the inside of the barrel..you know wut i mean? like if it is even possible for it to get worse...also if i shot 500 rounds through it with no notices in accuracy change its probobly gonna be ok..and if it was like 1/1000 of an inch difrence in hieghth (cant feel any difference with a toothpick) would shooting it wear that spot back down to normal? i wonder if i shortened the life span of the barrel.. i already have about 5000 rounds through it.
  4. wow right on lemmon thanks for sacrificing ur spare barrel for me..so now that u see wut i am talking about do u think later on down the road the barrel will be affected in any dangerous way..if alls i did was fuck up the accuracy a bit i can live with that it seems to shoot strait even after the dumb ass pipe cutter move..like i said, the other day when i went out shooting the accuracy seemed the same i just dont know wuts gonna happen 5000 rounds from now if anything at all...??i am wondering if the faint line will turn into a crack or if it will just polish away from bullets passing over it
  5. im pretty sure i lucked out and stopped just in time..its the only thing that i think could of caused the wierd mark..the pipe cutter i think..i think if i would have went n e further there woulda been a slight bulge and wouldnt shoot properly (accuracy would be affected i think)..500 rounds and no issues and many of those rounds were pretty close to automatic fire so i should be good..
  6. so i did some research and it sounds like i did cromip the inside of the barrel a little bit..or thats what coulda happened if i woulda kept going..i was using a pipe cutter with a dull wheel and i was also probobly going to fast and tight the device too much at once..therfore it left a perfect ring like mark all the way around the interior of the barrel at the cut point..even on the riflings which boggles my mind but it is what it is...i think in my case its more of a pressure type mark because i didnt cut deep enough to make it that far..hopfuly it doesnt cause future problems
  7. first of all wuts a ringed barrel..and if squibs are problems i have never had n e problems at all..i have about 5500 rounds through it with out any issues..every bullet put down the barrel has been tulammo and it has worked great..
  8. went shooting again today lemon...200 more rounds and no problems..some how i think the line on the inside of the barrel is some sort if pressure mark or somethin but it has not affected the accuracy or anything..i wonder if it will become a problem eventually..looked at my buddies saiga and he does not have the same mark on the inside of the barrel so its probobly not from the factory...im still kinda boggled by this..
  9. I never had to. Try to screw on your attachment after the first pass, and then tighten it some if need be. Are you going to thread it for the 14x1L and then use some kind of adapter to install the 74 style? Theres plenty of threads about threading if you search for them. I suggest using the Google to search this forum, as the search feature here is not that great. yes to 14x1 left hand thread and no to the adapter..i ordered i think the tapco ak 74 style break. the one for 21.95 at carolionashootersupply
  10. thanks man..i did some heavy rapid fire today without issues..i think ill lay this issue to rest..thanks for the input..so back to threadin the barrel..my tools and ak74 break will be here monday and im wonderin if theres n e thing i shouldknow before threadin it..i know to loosin the dye all the way for the first pass..will i need tightin the dye and make a second pass?
  11. i have not threaded it yet..and yes its all the way around on the riflings and the smooth areas of the interior of the barrel..so ya i dont know but i dont think it will be an issue..
  12. same thing happened to me with the pipe cutter cuttin into the barrle..i cut about 1/32 of an inch into it..also noticed a ring like line on the inside of the barrel and dont know if it has been like that from the factory or some result from the pipe cutter..ran a tooth pick over it and cant feel n e burs or anything...shot today and had no problems..just hope it doesnt turn into one over time.
  13. thanks a lot lemmon..good piece of mind i appriciate it..theres no way in hell theres light comin out i looked..the cut is like 1/32 deep around the outside of the barrel i used a micrometer to measure..and when i feel inside the barrel with like a tooth pick i can feel any burs or any roughness at all when passing over the line..maybe something from the factory..not sure never noticed it before..it was a pipe cutter with a round cuttin "wheel" type thing..could it be possible that the pressure caused the mark on the inside of the barrel..i dont see how cause i only cut 1/32 deep so i dont kno
  14. whoa...i was just lookin inside my barrel and noticed that theres a line on the inside of the barrel about the same spot i accidently cut my barrel while cuttin off the shroud..i dont see how there would be a line from cuttin barly 1/16th of an inch with a pipe cutter..does n e one else have this??????????? PLEASE HELP???
×
×
  • Create New...