Jump to content

Flatland Shooter

Member
  • Content Count

    374
  • Joined

  • Last visited

Everything posted by Flatland Shooter

  1. Lanbo Armory also shows some of these magazines in stock. https://lanbosarmory.com/index.php?main_page=product_info&cPath=3&products_id=28383
  2. The little spring loaded lever is there to hold the bolt open on the last shot. I've heard that it may cause the bolt to hold open even when you have rounds left in the magazine. I use my MKA 1919 for competition and have removed it on all my magazines. Just one less thing to go wrong. Tuned factory magazines work well with my gun. I looked into the ProMag magazines not for the lower price but at the time factory magazinces were unavailable. Backordered some at several vendor sites but never had one delivered.
  3. Have they even hit the market yet? A whlie back Centerfire listed them in their catalog but they never had them in stock.
  4. Now that sounds like fun, I'll never make it to Ironman but wish someone locally would put on a similar match.
  5. Rifled chokes are probably good for deer hunters but not so practical for 3 gun. Unless you come across an all slug stage, you need to vary the choke to the stage. However, some folks shoot LM for everything. Testing found it to be the best choke for slugs in my gun. In my MKA1919 I found that with Carlson LM chokes, Remington Managed Recoil Slugs get me the best accuracy out to about 80 yards. Past that and its a crap shoot.
  6. A little easy reading for the throne. http://www.gunsumerreports.com/review_922r_compliance.php
  7. The following YouTube video might give you some ideas.
  8. Mall ninja yes. But don't you just know someone who shoots mag fed shotguns in competition has already checked out the Cerakote website to see how close they can match the color. My match guns are just like Henry Ford's Model T. Available in any color you want as long as its black.
  9. The local Walmart website shows Winchester AA's for $7.87 per box but when I go into the store, the price is $8.97 per box. Almost enough to justify an ammo run to Missouri. Occasionally Brownells will run a sale on Winchester AA's for around $7.00 0r $8.00 a box. Time that with their free shipping and Winchester's $2 rebate, not a bad price.
  10. 1195 € ~ 1500 $ OOPS. You are right, I miss quoted the price from the ad.
  11. Good luck with the Federals. They did not run well in my gun.
  12. Per the ad, its a MKA Match for 1950 euros ($2177 US). Using domestic parts, several companies can pretty much duplicate the gun and have better a trigger, hammer and disconnector (needed for 922r compliance) for less money. The 45 cm barrel (17.71") might be an error (my MKA 1919 bbl is 19.1"). It would be tough for me to justify the $200 stamp tax to knock a little over an inch from the barrel. Now take it down to under 14" and we have something interesting.
  13. I have not been able to shoot my MKA for a little while due to an injury, but before it got locked in the gun safe, it was running quite well. Mine is a pre-XN gun with billet lower and various other parts to make it 922 compliant. To get mine to where it runs so well, first I had to break it in. It was probably over 500 to 800 rounds before it smoothed out. During the break in I kept it clean and well lubricated. Second I spent the time necessary to tune the magazine for top reliability. I have no problems functioning with factory 5 and 10 rd magazines. I also have good luck wi
  14. Tooth and Nail Armory will be your best bet.
  15. In the very first post they indicated these were made in the USA. Now we hear they are waiting on parts from Turkey?
  16. Several parts appear to be from the MKA 1919. (Magazine and handguard retention nut.) They indicate its made in the USA. +1
  17. Is it possible the heavy recoil caused a flinch resulting in his unconsciously pulling the trigger? The MKA 1919 in stock form is pretty light for 1760 fps slugs.
  18. Now that its running, maybe in time your gun will continue to break in and you will be able to use lighter loads reliably. I use 1145 fps Gun Club, STS and AA shells without problems. I've read about some folks running those recoil reducing stocks successfully but I've never seen one in person. After you get the gun running with softer shooting shells, you may decide its no longer needed. Or if recoil still presents a problem, maybe a mid-barrel comp may be of help.
  19. I'd be interested in one or two. More interested if you could get the number of rounds above say 25 or 26. (Is that even possible?)
  20. I'm also a Cmore user. I did upgrade to the aluminum frame at the start of this season. The only problem I've ever had with Cmore sights is the polymer frame cracking near the windage adjustment screw.
  21. I've not seen a Gen 2 magazine. Can you see the difference? Here is part 1 of 4 from Firebird Precision on building the FP-15 magazine. A good tutorial on tuning the magazines is included.
  22. I've had good luck with Remington Managed Recoil slugs and buckshot (1200 fps). They run well with no tweaking to a well broke in gun. I;ve found accuracy with these slugs to be good out to 65 yards. At 100+ yards not so good. Bill
  23. Ouch. Oh well, all that remains of the original gun is the upper receiver, barrel, bolt, locking bolt and drive block. Everything else was upgraded a piece at a time. And its still running. I'll try to give you a call on the upper. Thanks.
  24. I did not know this was an option. Though I do not need this done at this time, is it a service you offer? My match gun is a pre-XN gun Firebird sold through Centerfire Systems as a 922 compliant gun. Its still running strong, but I have a spare upper that could be used for an upgrade. Thanks.
×
×
  • Create New...