Jump to content

pizzim

Member
  • Content Count

    12
  • Joined

  • Last visited

Community Reputation

0 Neutral

About pizzim

  • Rank
    Member
  1. Keep it as at best it's worth a little less that what FBP charges to do a feed ramp (to someone that broke theirs) but if you ever sell the gun you can put the stock lower back on an fell the tac12 lower separate
  2. is it s running 100% ?? there have been some minor discussions on this board in regards to the barrel and how it comes into play in the chambering process do you see this being a problem in making it a true 100% (not 99.99999999) due to the variences that are seen from gun to gun?
  3. Jim are you utilizing the factory barrel on the Tac-12?
  4. i have seen some issues with the "mag catch slot" but opening/smothing out the mag well wont hurt
  5. Trigger, disconnect, hammer, piston .... cheapest way to go .... easiest would be a follower, floorplate, piston, forearm but is alot more expensive depending on the number of mags you intend to use
  6. thats about the least detailed definiation i could imagine (gota love wiki, or more so the people that answer the questions) The " charging handle " can/could be connected to an oprod but it itself is not an oprod The Scamatic for the 1919 shows the "oprod" as the rod most people refer to as a guide rod as the drive block rides on. two interesting point to this ... with the T&N forend it uses the factory part .... on the FBP forend it used a US made part however FBP has been advised by ATF that it doesn not count as a compliance part..... which by wiki defination isnt the oproa
  7. Last i checked the op rod is not the charging handle
  8. there is a bushing/seal foward of the barrel lug and it has an oring in it .... are you able to remove that by its self? ive seen it get "gummed up" and will in a sence lock the barrel to the op rod .... some clp, pb blaster and a little prying with a small flatblade and it will come apart.
  9. Im having a hell of a time getting the op/guide rod out to install the foreend ... and suggestions before i end up maring the crap out of it?
  10. Silly question ... why not just fill a buffer tube with lead or concrete to add weight. heck even sand would work
  11. This sounds more like an extractor or ejector issue.
×
×
  • Create New...