Cchis1322

Sure i will..mine is the actually the slide fire solutions..not the aluminum one. I couldnt afford/see spending more money on a stock than i bought the gun for. but if you still want to see the stock i can upload it later tonight

I have one and i love it, and just because you have access to basically full auto doesnt mean you have to use it..semi auto is still an option. I put a 50 gallon drum that had been cut in half at about 40 to 50 yards and with a red dot, and vertical forend grip i hit a 2x2 target 12 out of 15 times using the bump stock mode. Sure its not hitting a dime multiple times at a 100 yards but thats what the sniper rilfe is for .. and yes it is a good way to show boat and waste some ammo..but if you are cautious with how often you use it then you should get one. Very fun and extremely useful.

i have a bump stock on my saiga and I am putting a muzzle brake on it in the near future..actually threading it this weekend. But my question is, will have a good muzzle brake such as the j tac 47 keep the bump stock from working properly. I wouldnt really think so but just asking to see if any body has heard anything about that. Thanks

one more thing..what crush washer size from CNC.. i only see two different ones

OK perfect and i have everything picked out so all i need is a die and the thread starter i have the handle..i have a tap and die set just not the right die so the handle is covered and i cut just a tad bit under 5/8 because the pipe cutter was hitting the front sight while i was turning it so i had to move it forward just a hair. and is the crush washer a must have? or just as somthing to cover up the gap?

Hey everybody i just cut the thread cover off my saiga barrel and I found no threads, no suprise, but now im going to thread the barrel but my only question is I read alot about Ak47s having different barrel deminsions because the government turned the threads down due to import reasons, but anyway I was reading that certains barrels couldnt be threaded in certain threads because of that and so on. However i want to thread my barrel in 14x1 LH. So would that work for the saiga? or do i need to check the barrel deminsion before hand. Thanks guys

OK so i orderd a new trigger guard, retaining plate, the saiga trigger by tomix, and hole plugs. Is that it?

Hey everybody, got one more question. Im ordering the parts tonight and for some reason i can get dinzags website to work, it wont let me complete the order. but anyway i cant find a tapco g2 trigger anywhere so i was going to order this http://dpharms.com/products/saiga_accessories/saiga_s~2Fh_fire_control_group_by_tomix.html but it comes with sheperds crook,, and thats what i dont want, but would putting a retaining plate in there take the sheperds crook out? that way i wouldnt need to use it? and also the only tapco g2 i can find is a double hook trigger, would that work?

perfect well i got a drill, dremel, and angle grinder just no drill press so ill youtube that soon and see what i can do, thank yall for help it was exactly what i needed to know

got ya i understand it now, and last question would be what tools would i need, i have a rivet gun, but i dont think that would work for this job. and is this what i would need http://dpharms.com/products/ak-47_fire_control/red_star_axis_pin_retaining_plate.html

ok so ill need two of the axis pins then, are they both the same to fit both left and right, or do i need a right axis and left axis? and sorry for the dumb questions, im good with pistols and hunting rifles, but this is my first sagia type rifle so im trying to get the hang of it.

Alright so i went onto dinzagarms and found a tapco g2 trigger along with a trigger guard for saigas, should that be all? and once again would i need the axis retaining plate? if it helps the gun with performace that i will

ok so i found the tapco g2 and the axis retaining plate. but what exactly does the plate piece do?

you know a good site to find that on? or should any sagia site have that?

Hey everybody, i got my sagia and recently bought a bump stock for it but didnt realize i needed to convert it, i dont want to buy a parts kits because i dont need a new stock or pistol grip, so i was seeing if anybody knew the exacts parts i would need in order to do this and the process that would involve making the conversion. Thanks for any help!