papa_celms

Would you mind sharing what you figured out in order to easily get the spring and mag catch installed back on the gun? NOTE: This could damage your gun and I'm not responsible if you break it or can't put it back together. If you choose to file your tab make sure you be very slow to remove materiel. It doesn't take much. Generally you want to 1. File a small amount of materiel off the ramp. 2. Place the veprs mag catch back in the gun insert the pin (without the spring and watch where the tab grabs through the small opening behind the magwell. 3. If the catch i

I had a similar issues with the mags dropping out after each shot. I fixed it by filing on the ramp of the latch. I posted pics if your interested. http://forum.saiga-12.com/index.php?/topic/84047-sgm-mags-jamming/&do=findComment&comment=847435

So how does a hybrid molot/magpul forgrip work with 922r rofl?

I just dismantle the whole thing and go to town. Don't forget the gas tube.

I understand that and considered it. I just don't feel I should have to invest in a fix that shouldn't need fixing.

I have an EOTECH on mine . Lets hope it doesn't self destruct too. Would that be covered under the lifetime warrany? I'd hope they would ship you a new rail before having you send it in though.

I can't believe what they want for that mako hand guard. I thought I was pushing it looking at the Russian one above for around 160. I'd guess its due to the lack of demand for rpk accessories. I may wait see if I can get a nice looking US one.

What do you have to dremel off? Would their be any issues with it not mounting properly or being canted? I was kicking around the tan Hogue OverMolded pistol grip just so hard to judge colors from the small pics they post. I'm also attempting to see If I can get the Wholly forearm B-20 "Classic" dono how much luck I'll have since its based in russia, and then I hope I'd actually get it lol. http://translate.google.com/translate?hl=en&sl=ru&u=http://zenitco.ru/&prev=/search%3Fq%3Dhttp://www.zenitco.ru%26hl%3Den%26safe%3Doff%26client%3Dfirefox-a%26hs%3D3gE%26rls%

Right now I'm looking for a fore grip, and a pistol grip. I'm slightly mad that It's going to be near impossible to get my tan mako stock to color match anything I may buy... I bought the mako before I knew of 922r and that mako is Israeli. Should I just revert back to black or drudge ahead and try to get a decent looking two tone tan and black gun?

I know what an rpk is just want sure if "RPK FURNITURE" refered to rpk accessories or a brand of rpk accessories. The furniture part confused me.

When you say RPK furniture you mean RPK parts in general or a brand. I'm having trouble finding us made rpk parts in general which is why I ask. I'm also looking for US parts for 922r.

I'm attempting to replace my fore grip on my vepr 12 but have seen posting were people have to modify their replacement grips to make them fit properly. My question is what do I need to look for when ordering a compatible replacement? Will Saga 12 or AK fore grips fit fine?

My russian mag fit like a glove no issues. The problem is with the sgm mags. Filing the ramp on the mag catch on the vepr allows the veprs mag catch to grab more of the sgm mag. As you can see its just grabbing the edge causing the chip. I had 4 sgm mags and everyone grabbed in the same location. NOTE: This could damage your gun and I'm not responsible if you break it or can't put it back together. If you choose to file your tab make sure you be very slow to remove materiel. It doesn't take much. Generally you want to 1. File a small amount of materiel off the ramp. 2. Pl

Check out my topic http://forum.saiga-12.com/index.php?/topic/84047-sgm-mags-jamming/ I had a very similar issue with the magazine tab not getting a good hold on the sgm mags. Had to file the veprs magazine tab SLIGHTLY. But was great after that. For me and possibly for you no amount of breaking in the mag will help. The mag catch on the magazine or the shotgun doesn't come out enough . Mine began showing signs of slight chipping but I figured it out before they had any damage beyond some slight wear near the corner of the mag catch.

Ah ya I need to pay attention to the 922r... I figured it was made in the US. Oh well, I'll have to find some other parts to swap out. Thanks for the update by the way. Do you know if I need a mil spec or a commercial buffer tube for the RDAK. I don't believe their compatible but am unsure since I've never used a buffer tube before.