MTRamMan

Thanks for the info. I noticed when I donned the mask that there was a noticeable amount of resistance to breathing. I assume this is normal? The current mask on it is old and expired I know, but does this explain the resistance or are all filters like that? Kinda makes a guy feel claustrophobic.

Gas mask received today in near mint condition. Thanks for the speedy shipping and sweet deal. One question though, what's the folded plastic bag for?

bump... Anymore suggestions people?

This is why I got rid of my G2s. I experienced the problem with every one of them. The RSA has worked very nicely since then, but it will require modification in most Saigas. Here's one of mine: Notice that the top of the adjustment hole for the screw in the disconnector is plugged. It will work loose if you don't do something. I found the adjustment I wanted, red-loctited it, and then filled the top of the hole with JB Weld. Here's someone else's RSA FCG without the removal of the pre-travel adjustment area: Their rivet is further back than where the hole for it is in the Saig

Would this fit my 7.62 saiga rifle? Is any to run a Ultimak gas tube rail with a tri lower

Yes, please. I have one of these enroute for my conversion of my Saiga 7.62 and am hoping it is just a simple drop in as I am no gunsmith.

Is the choas rail the Saiga 7.62 specific model? I'm intersted. I have a new sporter model that I'm converting. Thanks, Dan

The overall point should be here... The guy or company trying to sell these mags at such an inflated price, even way above current market values is simply wasting his time and making himself look like the price gouging fool he is. His ad speaks for him. No one in their right mind will buy these... At least a that price at this point in time. I've paid more than I should for my recent purchases, but the items were at current market value and better at least. Shame on me though for waiting till the shit shit the fan.

<blockquote class='ipsBlockquote'data-author="Semper299" data-cid="860926" data-time="1360337617"><p> I have same Saiga. The BHO only works if you engage it. IMHO, it is worthless and gets in my way. I did not reinstall it, and will never miss it.<br /> <br /> When you remove the old trigger guard, the bottom of the receiver will need to be painted. Most people use Dupli-Color Engine Enamel Low Gloss Black DE1634. It seems to be the best match to the factory paint. Get it at your local automotive store.<br /> <br /> The holes left in the receiver afte

Does need the buttstock tang intact to fit? Thanks, Dan

Thanks for the info. MUCH appreciated! I will be using the RSA trigger btw.

I think I'm leaning towards the Midwest Industries rail set up now. I see they have a specific Saiga version. Do I NEED to get this one or can I get any of their other models? They talk it being for models without an end cap and I have no idea if I have one or not. Can someone clear this up for me? I know these AK's shouldn't be this confusing, but dang, I must be a little slow lately. Thanks, Dan

I think I've decided to go with the Ultimak top gas tube/rail replacement for my optic. Does ANYONE have any idea if this would be compatible with the Midwest Industries lower trirail handguard? What other handguards IS the Ultimak compatible with? Also, I want to run a UTG stubby folder PG on the lower rail AND a light of some sort... most likely a Surefire or other similar light with a pressure switch. Anyone know if there's room for both on the lower rail or what length rail I would need to accommodate both? Thanks, Dan EDIT- MWI just emailed me... NO it won't these will not wo

All very interesting comments and feedback here. I basically bought my AK for CQC with the intention of a red dot at the most. If I want to snipe something or hunt it with intent, that's what I have my AR or larger caliber rifles for. I'll see just how's accurate my AK is after the conversion which includes a RSA trigger group. Hopefully this will help my overall accuracy.

Well I just got the gun and am in the process of converting it. My GF has one as well that's not converted... Yet... That I've had at the range and have played with. Of course I've done my share of mag dumps on my AR My AK will most def be a real world working pre/active/post zombie Appocalypse gun and not a Hollywood prop gun with everything known to man strapped, taped and welded onto it! Thanks for the feedback. Much appreciated all.

I haven't considered Magpul except for their AFG2 "grip". I recently read on the Ultimak that if you do alot of range shooting that the mount can heat up and transfer the heat to your sight to ratings higher than max as rec per manufacture. This was measured by a temp meter per another forum member with concerns to the elctronics. For casual shooting without alot of mag dumps I'm sure it's fine though. Cy4ka... PM sent

update... I received the RWB mags and they look good in person. They look well built and are new. I guess they are of Korean make and I bought mine from GB from a company who sell them, Tombstone Tactical. they seem to be good mags and the seller has had no returns or complaints, but guaranteed me a replacement if they did. I'll give a range report when I can.

I bought a 7.62 16" barrel with MINT with less than 60 rounds through it for $500 about a week ago, prob could of has it for less. I'm surprised that it was listed for this so I didn't want to dicker with the guy. He even threw in a 20 rnd box of ammo . I've already dumped about that much into it though on parts for my conversion , not including ammo.

a little off topic, but are the poly 40 round mags overly bulky? Are they really practical or is it just as easy to run 30 rnd mags. I'm just now buying mags for my Saiga 7.62 ans was thinking I'd get a variety. Thanks, Dan

Thanks for the pic and info dubya. I'm looking at about 5 different rail systems, including the Chaos. Does it make the front end seem a tad heavy? I'll be mounting a red dot sight, UTG folding FG and a light of some sort so I want to keep it all as light as possible, but I don't really want a poly forend either. I'll look more into the side mount as well, I thought they weren't all that great at holding zero though. Nice clean setup btw!

Hi all, I think I'll be running a red dot optic of some sort and want to be able to co-witness with my stock sites. I'd like a tri-rail as well, but dang, the Ulitmaks are pricey. I don't mind top dollar products, but I'm already dumping way more into this gun than I'd planned. I've seen the UTG products and plan on using their folding low profile vertical grip. Any thouights on the UTG rails or can anyone suggest another good aluminum rail? I want to keep the fore end uncluttered and light as possible as well. Thanks, Dan

Can't a guy just simply delete it all together? If so, do I need to put something in it's place though? I mean, it's not like it's a LRHO option. I thought I heard that it made it more difficult to insert mags as well, maybe that was the mags themselves though that had the BHO notching. I'm so confused

I'm a newbie to AK's and by no means a gunsmith, but I'm mechanically inclined and no idiot. That being said I have a few questions that I can't seem to clear up by searching the forums; I have a 7.62 x 39 ~2010 model with the dimples and BHO lever from what I can tell, if this makes any difference. I'll be installing a RSA trigger group with the plate they sell that I think does away with a spring, houge grip onto the Aluminum trigger gaurd with grip bolt that CSS sells and an ACE M4 adjustable stock with the folder assembly and the internal mounting block that CSS sells. Also will be doi

Thanks. I'm waiting on parts from RSA is all. The only part they don't have in stock is the Hogue PG. I've ordered evrything else from CSS... and then some! OMG I think I found another sinkhole for my wallet!

thanks once again guys for all the input. It really helps. For the current price of things, I think I'll just stick with stick mags for now.