OldCopLarry

Just got her done this evening. I had to do some filing on the Chaos Titan, but that was expected. I added a lot of parts from suggestions here on the forum... thanks to everyone.

Thanks Cameron... the quad is the last part I need to finish my S-12. Then, I'll post some pictures.

I read one thread that explained that with a right folder, you don't have to swing the gun away to open the stock (when you're a right hander), when you have the weapon slinged on your shoulder (much faster "up on target"). Made perfect sense to me, so I went with a right folder. You can still fire it with the stock folded too.

Out of stock till early June? OK, I'll wait...

I took 3 screws out to remove the factory stock. Only two required to put on the folder, and an extra screw in the bag with the swivel. I can't figure out where it goes... The swivel simply pops on like a ratchet. And, I read a post somewhere this morning that mentioned a recoil pad will be available for this soon. Anyone know about the pad?

Got my folder today. I ordered the swivel, which I discovered was a snap in... cool! There is an extra screw in the package that I can't figure out what it's for..; except maybe to put in the bottom mounting hole, but the threads are wrong. Do I tap it out and insert the screw? It's not needed, except to cover the hole???

I have been learning a lot from this forum about my gun. As mentioned in another thread, my gun did not come with a BHO. Some have said the reduction in parts is a good thing. OK, but I've recently noticed a picture of a safety lever that has a notch in it that holds the bolt "charging handle" in the bolt open position. I can't find a thread to modify my safety lever to accomplish this. Anyone have a recommended way to do this (video or pictures)? In addition... where can I find the finger tab that rivets onto the safety lever for easier movement of same? Last question: Is there

Clint, I now have the fore grip and thumb support, and received my 12 round mags, and barrel shroud. . I am waiting on the Titan quad rail, bonesteel folding stock and MD-20 drums (I ordered 3 of them). Once assembled... trip to the range! Then, red dot, flashlight, laser... we'll see how I feel then. I pull it out of the safe every now and then to gaze at it... is that normal? I have pictures of my gun, and not of my wife... Creepy?

Clint... thanks! Parts ordered!

I have the following parts enroute. I ordered the bonesteel folder with the sliding stock. Next, is the Chaos Titan quad rail (just ordered it a few minutes ago... hope it doesn't take too long). Then, two drums... one is a Pro Mag 20, and the other is an MD-20. I bought 3 12 round sticks to finish my mags. I bought a Claw barrel shroud. Now I'm looking for a cool fore grip and a sight (probably a red dot), and a flashlight mount of some sort. I'm not sure what else would add coolness, and functionality to this. After I test fire it, I'll decide on a reliability kit and gas adjust

Cameron: I want to place an order for a Titan rail for my S-12. Carolina is shut down, so I'll order it from you. Please contact me with payment options. OldCopLarry@aol.com or PM me here.

I guess it should just be the BHO. I got the FR letters from another post, and wasn't sure what it meant. I need the spring and metal plate that fits in the channel on the trigger floor (and whatever else is needed for the upgrade). I will assume I need to grind off a little of the hammer tube (if that's what it's called) to allow room for the BHO plate under the spring. I'm going to guess that the BHO was left out of the conversion because of the wide part of the hammer, assuming he didn't want to grind it. Sorry I don't know the correct names and descriptions of parts yet... still learn

I took custody of an S-12 (NIB), that had a conversion already done. The BHO mechanism was removed in the conversion, but I think I'd like to put it back on. Anyone have the complete kit for sale?

OK... I'm on my way to that forum right now... thanks!

Thanks Clint... Sally, Clint mentioned it in an above response: "You can possibly find a BHO lever and spring at the forum e-store, Carolina Shooters Supply, or possibly Mississippi Auto Arms". If it's that easy to do, I may order the part (if I find one) and open this thing up.

Yes, that "cut" is there. I noticed in the conversion videos, it was suggested to grind the tab down a little. I will assume that it was removed in the conversion. My only concern was that it needed to be there. As long as I can still use it without, I'm not going to worry about it, and simply "rack" the bolt when the mag is empty. Not an issue then... thanks for the input. The guy who sold this to me (GunBrokers), said it was factory converted, and NIB. It is... in fact, brand new.

Here's my new S12: I plan on lots of new additions. Just ordered a bondesteel folder, and I have bids in on some drums. Quad rail and shroud up next. I'll post pictures of it as it changes. I have a buddy who has more pictures of his guns and motorcycle than of his wife and kids... guess it goes with the territory.

Got it... thanks, I just ordered the Bonesteel, and am looking forward to posting pictures of my new toy once I get all the bells and whistles installed.

OK, I just ordered the Bonesteel folding, 6 position stock. I entered the discount code, but it didn't show up on the final bill... ???

Just wanted to make sure. The only thing that is different, is that the bolt will not stay open on the last round... correct? Do I really need that? One other question... My gun's safety lever slides all the way into the bold window. So I want to drill a "dimple" to allow the small dent to drop in and stop the lever from going too far up the side (hope that makes sense)?

I am watching a video on the conversion. Mine was converted before I got it, but I don't have a bolt catch on this one. Is this a problem?

Oh Bonesteel!!! I need a members discount code to place an order.

In the video, it shows the safety releasing when the stock is flipped open. ??? OK, how is that connected?

Wow... lots of interest here, and lots of knowledge! Glad I joined up. OK, so lets assume I go with the bonesteel. As a right hander, do I want it to fold left, so I can I can still access the trigger? And which of the two models are longer?

Been a while since anyone posted in here. While I read the first few posts, I didn't read any following those. I am looking for a drum that will reliably feed my new S12, and I don't have the $700-$800 for the Alliance, and have been cautioned against the Pro-Mag... OK, I went back and re-read the first poster. Should I assume that the MD arms drum is the way to go?