Jump to content

originalnj spetznas

Member
  • Content Count

    22
  • Joined

  • Last visited

Everything posted by originalnj spetznas

  1. So you say recoil spring, barrel, and bolt(and related bolt parts) i need from AK-47? thats clear. But the question is: every other parts i have to take from AK-74 or AK-47? Or is it all the same and i can take it from AK-74 OR AK-47? W8lifter mean i have to take it from AK-74. Right? These rifles are based on the AK-74. All parts that did not need to be modified to accommodate the 7.62 can be replaced with AK-74 parts. The recoil spring, bolt carrier, firing pin, dust cover, gas tube, etc etc should be taken from the AK-74. Basically the only replacement parts you CANNOT just dro
  2. So you say recoil spring, barrel, and bolt(and related bolt parts) i need from AK-47? thats clear. But the question is: every other parts i have to take from AK-74 or AK-47? Or is it all the same and i can take it from AK-74 OR AK-47? W8lifter mean i have to take it from AK-74. Right?
  3. These are 100 series rifles, so all of the non-caliber specific parts can be replaced with 74 parts. Al right, and which are the caliber-specigic Parts? Barrel and Magazine. Thats it? Every other square parts are from AK-74? (Bolt carrier e.t.c.)
  4. Hello. I have a Saiga AK-103 semi-automatic. http://www.thaifighterclub.org/images/answer/A05106482110313124817.jpg In fact, it is a AK-74 in AK-47 calibre. Now my question is, which square parts do i need for this gun? Bolt Carrier of AK47 or AK74? Trigger Group of AK47 or AK74? Front/Rear Sofgt of AK47 or AK74? e.t.c. I hope you can help me
  5. Hello guys. I want to buy a POSP 8x42 WD http://kalinkaoptics.com/rifle-scopes/posp/weaver-dovetail-picatinny/posp-8x42-d-pro-w-independent-focus-and-us-mildot-rangefinder-rifle-scope-weaver-version.html Now my problem is, i have a Midwest Side-Mount with 1913 Picatinny Rail. I know that usually, you can mount Weaver-Rings on Picatinny. But with this POSP, the Distance between the two Rings is set. Is it sure that the spacing between the bolts fit on the 1913 picatinny? Because i thought the distance of the grooves is different between Weaver and Picatinny. The second qu
  6. Does the CAA Mag-Coupler fit Promags 7.62x39? And a 2. question: I have a Midwest Side Mount on my AK-103 and don`t know which scope i should buy. UTG 3-12x44 or UTG 1-4x24. Which one would you prefer? Do you have pics of the Scope mounted on AK? Greetings from Switzerland Spetznas!
  7. So here is my finally Saiga 12k. -M16 Style Muzzle Break -Tapco intrafuse Handguard -Walther Tactical Pro Flashlight -CAA Grip -ATI Pistol Grip -Original PK01-VS Red Dot
  8. Yes, but thats no Problem. Its still possible to aim I know more now. An SVD mount rail cant be installed on an ak, because its milled in the SVD receiver in original. But there are universal POSP bottom mounts that will fit on AK and SVD. But sadly, its not aviable here in Switzerland :/ http://kalinkaoptics.com/accessories/for-posp/posp-universal-bottom-mount-w-black-finish-for-pso-posp-scopes-and-bp-02-mounts-hot-swappable.html I also heard from russian Soldier in afghan war. They filed away a "stopping pin" on the SVD POSP so they could mount it on their AKs. But i dont wan
  9. I have a Saiga M3-Exp-01 and i want to buy a POSP 4x24 scope. But i dont like the high of the AK POSP when it is mount on an AK. I think it is too high. The SVD variant of POSP 4x24 is a bit lower. Is it possible to mount the SVD model on an AK mounting rail? Can i change the mounting rail on my Saiga with an SVD mounting Rail? Picture 1 = ugly Picture 2 = Perfect
  10. Hello everyone After my Saiga 12, I`ve bought also a Saiga M3-Exp-01 now. But i have a question. I think the gastube- and hand protection system is exactly the same like a AK-103 / AK-74M. Can i use an UTG Quad Rail 7.62x39 on the Saiga M3? Or is this only possible with changing the upper gas tube?
  11. I have an ATI stock And now i want to buy a Saiga 7.62x39mm. Here in Switzerland, there are only Saigas with factory-Folding stocks aviable like this (look at the silver button on the left of the stock): Now my question is: Can i put the ATI Gunstock on a Saiga with this factory-folding Stock? Because in the uploaded picuture, you see a converted factory-folding Saiga (Look again at the silver button) with an M4-Style gunstock. Will this also work with an ATI Gunstock?
  12. First start out by unscrewing the plug and checking out the ports. You'll be able to get an idea of how many ports you have. Next you should remove the gas block. You won't know for sure what's going on until that thing comes off. Actually the first thing you should do is some research on the forum here. I'll try to help out more but the day is getting busy. I just looked and my Saiga have 4 manufactured Gas Ports
  13. Its a new Saiga from stock. Never used before. So i think it has 3 Ports? What should i do?
  14. Today i was shooting my Saiga 12 first time. I had some problems and need help. I used Sellier & Bellot Special Sport Slug 2 5/8 in (67,5mm) and the shotgun jammed at each bullet. The empty shell jammed. (30 Bullets were shot. Everyone jammed) Then i used Sellier&Bellot Birdshot and Sellier & Bellot Rubberball (both in 2 5/8 in (67,5mm) an the gun just didn`t repeat. I had to repeat itself. With S&B Buckshot 2 3/4 in (70mm) Everything was fine. Im sure i tried both gas-settings. Can anyone help me please?
×
×
  • Create New...