mitchrod11

Thank you for the info an I will look to find them. Thank you for that link I will try more there

Been there done that if I had a good answer you think I would be asking. Been searching about this with no clear answer for almost a month now. That's why I am asking. So if you dont have any good in put other then telling me to search as I have done then your not helping me or anyone else looking for a good sold ture answer.

Anyone? Help please

I Got it finely !!!

this is what I mean. The CSS puck sits about 3 cm from the gas ports. As the OEM puck sits about 1cm From the gas ports.I'm sure this makes a difference even though it is not much. So what is better for low brass.an if I use the CSS puck for low brass reliability should I also keep the DPH gas plug to regulate better and more choices of gas flow. As seen here

Yes a little nub. An its a lot shorter so is it better for helping the low brass or is the OEM puck better I thought a bigger puck would be better cause it has more mass in the gas tube creating more pressure right? So OEM would be better. Or do I have it backwards the smaller puck makes more pressure. If any one got a good explanation on this I would love to know. So I can make a choice. Cause if I shot the CSS puck its mine.

Why is the CSS puck so much smaller then the OEM puck?

Both after an before cause I love the look of it but still wouldn't work even after shooting good. still looking for the answer about the CSS pock if it is better than the oem puck or not being that it is smaller than the OEM puck. and also why is it smaller than the OEM puck if anybody has that answer thank you.

I got the c_s_s puck in today. kind of confused as to why it is a lot smaller than the stock one.is that better than stock or no? also I am really disappointed in the DPH arms gas plug regulator I was getting it hoping to be able to adjust without having to push the indent in but to my disappointment that is not the case so I'll guess I will be retaining the stock block an returning it. So if anybody has any reason as to why the CSS is a lot smaller than stock I would like to know an if its better or worth trying let me know thank you.Thank you. I got the c_s_s puck in today. kind of confus

I have an autoplug from a friend of mine an it didn't work for me I had the screw like almost the whole way in an would not work FTEs every time or I would have that in an be happy happy but it didn't work at all an gave it back. Works great for him not for me

I think I may still try the dph gas plug so its not so hard to adjust the gas plus able to fine tune it. Plus the CSS puck. Not going to use the light spring as I don't need it. So I will just resell.. thankfully I don't have to drill:):)

just want to give a quick update I want to thank you all for your advice and help. I did some more polishing on the bolt and bolt carrier also the trigger hammer and on the disconnect. I also not sure if anybody has done this or not I even polished the original OEM puck. and put it in I even polished on the inside of the gas chamber some lightly to give it a smooth feel. AND WOW WOW WOW WHAT AN AMAZING GUN NOW IT WORKS. JUST SHOT 150ROUNDS IN MY 20DRUM 10MAG AN 5MAG.... GUESS WHAT 1FTE AT START AN THAT WAS IT!!! AMAZING!!!

I will try OEM puck again. An if worst comes to worst I may drill A gas port. How big should I go? How big is to big? What should I do an not do? Sorry just not trying to throw almost a $1000 in the trash if you know what I mean haha O plus remember this is a used gun not sure how many rounds have gone throw it but it seemed clean an I always wanted one so I got it but its also doesn't look like shit or beat at all

Yes in my s12 the twist puck works better then the OEM one I have. I was using the stock mag too an have FTEs on it too plus my other two.. my 10rounder seems to work the best IMO. I have a CSS puck coming the three ringed one right? What do you mean by adjusting the hammer? Kind of lost there. When sliding the BCG with the hammer locked it seems to move for the most part I would say smooth for an AK action. My ports are at about 3/32s is that good? Sorry it maybe the auto correct I seen that sorry will be sure to read before sending.

You know to think of it if I do hold it with a death grip so to say it shoots good. It is a used gun that the guy was haven trouble with. an when I took it to stock gas block it worked I had to order a new one of course an it came with a puck the puck sucked but the gas block worked an made it work to this point as to where FTEs are unpredictable, but a tonless then what is to expect with a stock system other then a twist puck. An that was why I was thinking of the low brass kit to have a softer spring to help an a higher gas release with the 6 choices on it to be sure it would work with out