Shotgunner77

Okay, well it should not be a problem to grind much of it off to here it won't hit the bolt or carrier, that must be the issue right? I will look into how it could be an over travel stop too. Thanks.

Anyone know if a double hook style AK trigger interferes with the bolt head or body of a S12??

Hi guys, been a long time since I posted, I pulled my S12 back out of the safe and am excited to try and fit it to this bullpup kit made for an AK. It will take some minor adjustments for things to have the clearances, but I seem to have it figured out. Only things that this kits comes with ha double hook trigger, taco, I have a single hook in there, and I am wondering if the right side hook will interfere with the bolt or carier. . I need to use the double hook as the R side hook is used as a lever in trigger linkage, but I can grind it down quite a bit to shorten it if necessary. Is the

i'm sorry, is there another forum for bull pups or something?

I have a S-12 SBS. I was thinking about maybe selling it, or keeping it and maybe getting a bullpup enclosure for it. I know that center balance systems makes one. Anyone else? Mostly I would want something that is light, not too concerned about hte trigger. Thx

i am really impressed w/ the storm lake barrel just in terms of its apparent workmanship. I compared the chamber to the factory chamber, thnking maybe it would have more support and sharper edges than my 9mm barrel on the feed ramp area. Per my eye, it had the same amount of case support, and the ramp was more blended into the chamber. It looks as if it would be more reliable than the factory barrel even. The 45 cal worl barrel, it was fully supported with a different feed ramp angle. I actually worked it a little to make it more like the factory ramp/chamber so that I wouldn't be giv

lol, it seems that my front sight was dragging on the underside of this optic mount pretty bad. I took a little off both, I bet that will clear it up. I'll have to test it out again.

they said all springs are the same strength for all caliber cans. The can is the same weight, or even lighter than the long 9mm version of the can. He suggeted it might be the fit of the barrel is a little too tight in the slide. The thing did say fitting may be required, it is a storm lake, and it didin't seem to want to go in readily when I first tried. Otherwise a weaker action spring might help inclese slide velocity??

thx bro

so I would need a stronger or a weaker piston spring?? thx for your replies

G17, storm lake barrel, osprey 45 can. Lubed gun & piston well. Acts about the same w/ 115g WWB ball and 147g Gold dot. ejection is weak, forward left/up. What do? If I go w/ maybe a 14 lb action spring, does anyone make a plastic guide rod like hte OEM so it will flex w/ the damn dust cover or is a metal rod the only option? Thx

I probably want to do another F1. Is eforms working? the ATF alreay has a formal draft of the responsible persons app form... Is it working as shitty as before? Are there certain browsers you cannot use, certain times of day you cannot be doing it etc?? Thx

I just want you all to know I am pefectly straight and that I don't find the vagina scary at all. If you saw my big muscles you would have no doubt about my heterosexuality!

TA DA! now you all know that I am not gay, I have never been gay, I will never be gay. Just wanted that to be clear.

test nuts, I think its too big. 1024kb max for a gif? I'll have to resize it I guess...

that is neat, about the airforce buddy. yeah, it not classy, but damn, dat ass. Trying to make giv but i won't post it or use it as avatar till a mod says its okay. here is the gif http://makeagif.com/i/Co1ykf

I see some have sexy gif avatars. http://www.youtube.com/watch?v=GWeDfz94isI ca 1:08 In my defense, I do not listen to rap, I just saw that ass in youtube and clicked it

hey evlblkwpnz, I see you are in Jax too, hello. thx for posting that useful info. Yeah, so I get to keep the stamp, I would keep it w/ the letter from the ATF thanking me for notifying them and receipt of the work order describing the gun having been de SBR'd and maybe a pic w/ the permmattach, and, of course, a bill of sale to the guy I sell it too to cover my ass in case it turnes up in a crime scene some day, especially it it were re-SBR'd. I just cannot come up w/ the 6.6" I need to do it. The longest muzzle device is like 5" right? Add one of those muzzle choke exte

so, w/ the deregistration letter, I guess I woudl send in a work order/invoice form the smith stating that he had pinned/welded the extensions on the muzzle and verified the length? the engraving, I just used the mfg SN and I put my trust name no there. I woudl be able to remove my trust name right? The original mfg & importer roll marks are still on there.

lol, you got your $200 back!

yeah, its not any eavier than any other, its just heavey compared to LW AR builds etc. I had some guy on here do the bolt relief and polishing and duracoat it, weld an extention lever on the safety, move the pistol grip and maybe I think he did something to the back of the reciever so I could attsch a folder to it. Its been a few years since Ive though tabout it. I cut and threaded it myself w/ some dies I rented off the forum.

facing similar situation, would like to sell it as a title 1 gun, once permattached and de-registered. What is the longest muzzle device out there? I need to go from 11.5-18

didn't know there were any barrels on the market. last time I checked, you had to buy a whole gun for many spare parts. I sort of doubt that would be cheaper as I would have to pay someone to do that too, and for a refinish, but it certainly is an option. Thx man, maybe I can just get a reducor coupling and nipple from mcmaster... linear comp lol ETA: nope, not that thread pitch. How about this, recommend a cheap muzzle device that I can have an oversized stub of thin walled pipe welded to its outside. Then the buyer can carefully destroy it when he gets his Form 1 back and put

yes, you can remove SBR/SBRs from the registry by placing a >16/18" barrel on the unit and sending in a letter. Of this I have no doubt. It may be differnt if it is an SBR that started its life as a pistol, it may not be able to go back to being a non nfa pistol b/c you "manufactured" a rifle from a pistol and you cannot make a rifle from a pistol or some such due to some interpretation of the GCA. I think you are thinking of "once a rifle always a rifle," which if it applies at all anymore, no longer is understood to prohibit a title 1 handgun from being turned into a title 1 r

I am thinking about selling my S12 SBS. Selling an SBS is a big hassle, so I was thinking about permattaching a muzzle device of sufficient lenght and removing it from the registry, and removing the engraving so as to sell it as a title 1 weapon. It has an 11.5" barrel, normal gas system. Runs great w/ heavyier loads as it was over gassed, thoough it doesn't work w/ the cheap bulk pack... Anyway, are there any devices on the market that I could have attached that would bring me up to the correct length? Before my old accont here apparently got purged, I rented a set of guided dies from