Racer 27

Here I finded it. http://forum.saiga-12.com/index.php?showtopic=53044&st=0&p=496350&fromsearch=1entry496350

I think that evilblackrifle posted a thread on it.

Good luck. Shooter. Have fun packing. I just got done myself, boy a guy sure can acquire a lot of stuff.

Take and push the follower slowly down and see if its hanging up or dragging on the inside of the mag.

I believe that you have to send it to a dealer in your state.

I called Burris. They said to send it back and I will have a replacement in about 1 week. So guess I won't be trying it out this weekend at the 3 gun match. Now where in middle of this moving mess did I put that rear sight. Moving sucks.

Anyone else having an issue with theirs? The dot dims down to nothing on mine. I found a post on the internet saying to put a rubber band under battery and it fixed it... until I shot it this weekend. I've got a 3 gun this Sunday I need some quick fixes. I've got it mounted on my glock's slide.

Your first link doesn't go to the right place. It has an extra "http:" in it. Was that your first match? You got me pumped up for the 3 gun I've got on Sunday.

That's what its about. And you got to learn how she runs. How were the courses? Who are the MARSOC?

If you're trying to do as good as you can: I'd choose #1. Small package, lighter recoil. Faster reloads. If you're going to do it, to do it: Which ever short barreled one you have enough mags, gear, and that you feel you will have the most fun with. After re-looking at your last and then first post it looks like your feeling the Red Jacket. Run her and have a blast.

Check their rules. The 9mm might not be big enough. Where I shoot its .223 or larger. If you can run the 9 use it with the suppressor, less recoil, less muzzle flash, and a very large cool factor. But the cool factor would be there with the red jacket rifle too. If you have to use the 7.62 check them with a magnet.

I just started last year so I'm no expert, but go do a couple with what you've got and your question will answer itself. I started with a AR, Beretta, and Saiga 12. Didn't like the Beretta double action to single so I picked up a glock. Welcome to the addiction.

Thanks.

I need to change my address. Bad thing is I'm going to live with a friend until I find a house so I'll need to change it again soon after. What do I need to do? I have it with an LLC if it matters.

I have one of the welders that works for me welding up a couple tonight after work. I'm going to see if he would be willing to do any more. Any chance your welder wants to do a couple more? I'm in the same boat as Eric. I'd pay good money for two of them. Please PM me if you want to sell a few. If I was to offer them welded I would want to have the welds stitch welded so that the mag wouldn't get warped. The welds by the tabs are longer about 1 1/2". What is anybody's thoughts on that? Blow up the picture of the shiny mag up above that's how it would look. I can't ge

I'll try to get one painted up by mid-next week. I sold my house and I have to get out by the 21st so I'm a little busy.

Great story. He's got it coming out in print very soon I read.

I have one I'm pretty sure. It has a purple receiver. I haven't had an issue with mine runs get. Everything locks up tight. Accuracy: 100 yards if I do my part I can hit (or scare the shit out of) a beer can every time.

Hears the part about the tabs: 14. Tab time. The front tab is the biggest looking of the two. Place it centered side to side and flush with top of front piece and tack in place. Make sure that the top of the front piece of mag body is flush with sides and tack both sides of the tab on the top. Then repeat for the back. Check the fit in your gun, we all know that there is variances. The measurements are very close to an AGPs but I built it to fit tight so you don't have side to side movement. All that I have made have locked up in both of my shotguns. When they fit loose it messes up yo

The tabs go flush to the top of the front and back of mag. The bigger looking of the two is the front. I wasn't really thinking that someone like CSS would buy these when I was making them so I'm a little behind. I have some instructions that I had sent in a PM, I'll try to see if I can get them out to you. I will be racing tonight so bare with me.

They won't fit in a mag well, they are squared off in the corners. It would need a sleeve machined for it to fit correctly.

Have you put in a reduced recoil spring? If so put the original back in. If not it sounds like your gun is way over gassed. You need to get a new gas plug that you have more adjustments to help reduce the amount of gas coming into the gun. Take some pictures of how bad the back of the gun is getting beat up. Someone with more knowledge should be along to help out shortly.

I have one of the welders that works for me welding up a couple tonight after work. I'm going to see if he would be willing to do any more.

Heres a picture of the one, that I sent Cobra, in my shotgun. I got it coated with the oil pans that we have at work. Came out looking almost chrome. And also one next to an AGP 10rd.

I've done a couple. You should be able to weld them up yourself. Its made so that even a caveman could do it. I had problems with them working 100% with the surefire spring. You could try to stretch one but I just used an AGP and it worked prefect. Here's a utube link. They look like the alum mag, the other one was the first prototype.