Jump to content

BattleRifleG3

Contributor
  • Content Count

    2,527
  • Joined

  • Last visited

Everything posted by BattleRifleG3

  1. I feel that 20 rd is the right number for 30-06. 10rd isn't a bad idea, especially for states with a mag capacity ban like NY.
  2. For a basic sporter stock, right handed, without needing compliance parts, the Izhmash set is probably the best way to go. If you go conversion, probably best to get a complete matching set and resell the complete Izhmash one.
  3. I'm still in the biz in a relatively low capacity, for the very patient. I'm not sure what's being sought in a custom handguard, but one man's custom is another man's standard.
  4. I'm still at it, but time available is less since I have a full time day job. I'm not on any forums as much these days for the same reason. E-mail is the best way to reach me, though it sometimes takes a while for a response. If a fast response is needed, the furniture definitely won't be done fast enough either. My furniture is definitely for the very patient. I'm working on ways to serve as many people as possible, so more changes in terms and priorities are in process. The Obama/Pelosi scare put a high priority on sets for converted S12s, but I think that factor's levelling off.
  5. Is this a set made for the Saiga, or is it an AKM pattern set that will be used with a front and rear end conversion?
  6. 45 ACP and 9mm have the same kinetic energy. 9mm gets it on account of KE = 1/2 * m * V^2, ie its velocity compensates for lack of mass in situations where KE matters. 45 ACP has it beat on momentum. Interesting factoid is that some 9mm hollowpoints mushroom out to 45 diameter. What that generally means is that for shallow, soft targets (ie center of mass, not necessarily bone or dense muscle), a 9mm hollowpoint would approximate the performance of a 45 FMJ. Against hard/brittle objects, or thick, or dense objects, it gets more complicated. In the real world, a pistol you're com
  7. Pittsburgh is a city but pretty well balanced for a city. The Democrats that always end up in local government get a little power hungry, as does the school system. They're now suspending students for being late to class in response to some gang violence. But the state has local gun law preemption and shall-issue CCW. Allegheny County (Pittsburgh) issues more CCW permits than any other county in the country (though I'm sure Texas splits its major metro areas into multiple counties.) We probably have a relatively high number of urban hicks and conservative academics. Sorry, had. As
  8. A double stacked mag for rimmed straight walled cartridges could happen with the right geometry. However, the machining to actually hold that geometry would make the mags expensive (machined bar stock) and the machinery to make them would be even more expensive. Then add to the equation that you're taking a double stack mag and feeding into single stack. And not in a simple triangular shape like most pistol mags. No, in order to clear the Saiga mag well it would have to feed into a straight single stack. Closest thing I'm aware of is the double stack Makarov mags. So yes, it could
  9. I prefer the Saiga handguard to a typical AK front end. More area to hold onto, more flexibility to where you hold it. I never liked the feel AKs much, but convinced myself to buy a Saiga X39. After conversion, I was amazed and concluded that a Saiga with P-grip conversion was the ideal tactical carbine. To each his own. Folks who leave their factory handguards behind make them available for other projects, like AMD pistols.
  10. Talk to me when you're ready. I can provide dimensional info.
  11. If the aluminum isn't actually bearing the bolt force, if it's machined correctly, and if it's manually opperated, there shouldn't be any drawback to using it in a shotgun receiver. Mossbergs are my favorite. Others I've used include Remington 870, Stevens, and Browning BPS. I handled a Rem 870 at Cabelas and handed it back immediately. That action was rougher than I could ever imagine. I'm talking grinding while cycling. The Browning for 30% more was sorely tempting, but my Mossbergs will keep me satisfied as far as I can imagine.
  12. I think someone observed that one reason nearly every existing pistol manufacturer is making ARs is that it may open up doors related to existing LE contracts. Sort of a bureocratically instituted brand loyalty.
  13. I found the same thing out from customer feedback. Now I ship my handguards undrilled. Glad to know I wasn't crazy.
  14. Tony did one AK style conversion but kept the factory mag. It is NOT a good candidate for conversion to BAR mags due to feed lip style. It could be done (modding the mags, not the gun for unmodified mags), but it would be so much work that making a fresh mag would make more sense. A board member successfully developed a fresh metal S-308 mag. That would be the way to do it.
  15. Very nice to watch this go from concept to development. I'll be looking into getting some of these at some point. If you find yourself looking for another mag project, talk to me about Saiga-100 30-06 mags.
  16. First I've ever seen a convex curve on the front. Very interesting. Do they call it a SAW grip themselves? I consider the flat sides flared style used by TAPCO to be the definitive SAW style. I have a style I call SAW that lacks the grooves but has a similar profile to TAPCOs. This one is the opposite, different profile, just the same grooves as Tapco.
  17. Looks like a great stock. I prefer to still have the p-grip conversion when using a drag stock. Better balance and trigger. If you find a well priced contractor let me know. I would be making far more stocks if I had the time.
  18. Great ideas! I use the buttplates for custom stocks, and have lots of buttstock shells laying around.
  19. You have to majorly chop the mag or majorly modify the gun. If you're going to modify a gun, you had better know how to do it safely and in a manner that doesn't mess up reliability. When it wasn't legal to majorly mod a hi cap mag, I converted my rifle for a mildly (legally) modified mag. It worked but had tradeoffs. Ultimately I think there are better tradeoffs to be achieved. At some point it becomes easier to design and build a new rifle.
  20. I'm still around, making stocks for the very patient. Glad to see the Russian stocks making their way in. Lots of people asked me to make duplicates which I'm not equipped to do, so now they can get just what they want and I can focus more on my original designs. When I finally get around to doing some stock sets for myself, I hope to share some pics of some interesting stuff.
  21. That sounds like a great idea, only other possible issue would be feeding blunter bullets. Just something to get past, may not be that hard, I don't think it's prohibitive at all.
  22. Check the Saiga General forum for a writeup and range report. They have tons of conversion potential for the creative and not timid.
  23. No, but I've seen their price drop about 40% since coming out. Apparently they weren't everything they were cracked up to be. Inspecting one in person, it didn't seem that bad, at least for a shooter. I like the safety, extractor, and 3 lug bolt, and the stock with integral studs isn't bad either. I'm tempted to pick one up at current prices as long as they have full warranty support.
  24. The warpage of any material is proportional to its thickness, even if inletted seriously. The multi-piece sets of AKs, including Saigas, make this less of an issue. The general crudeness of the AK even more so. I make stocks out of oak all the time. Used to use while oak because it was supposedly stronger, but it's cracked on me much more than red oak. I recommend a heavy sealing finish. Hard to get a clear polyurethane finish (it's a little bit yellow by nature), but a red tinted finish would probably turn out well. Polycrilic can be clear but doesn't take moisture as well.
  25. I have one. Everyone said they wanted one but hardly anyone bought them, so people stopped stocking them.
×
×
  • Create New...